Basement resto projects

News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: Basement resto projects  (Read 1899 times)

    Offline cudazappa

    • Full Member
    • ***
    • Posts: 709
    Basement resto projects
    « on: November 27, 2011 - 06:14:06 PM »
    Just wondering what ideas are floating out there for some light winter restoration projects.

    My car is back in enclosed, rodent free storage (YAY!!!) and because its close to home, I plan on going over every weekend or so, and try to grab something off the car as a little side project.

    First idea I had is to take the Hood off (its a lift off, so that makes it EASY) and have it repaired and repainted, and put the trim on the front of it.

    Another idea was maybe to restore my "spare" grille.  Moving stuff around tonight in the basement I found a box of "spare parts."  I have an "acceptable" grille on the car now, and a "better" one in my dad's shed loft that's more suited to restoring (looks like an R/T grille, no paint on it).

    There's no power/light at the unit, but looking for some ideas that when late spring/early summer comes and it moves to its (hopefully final) location, the list of things to do won't be as long.

    I'm still trying to get a little scratch together to finally finish my engine (RHS heads, really all that's left).

    So aside from engine, hood, and grille, any other projects for doing?

    Dash Cap?

    Door panels (I need a new rubber piece that rubs against the glass)...

    Oh, sew up the driver's seat (aftermarket high bolstered)

    Hmm... I'm brainstorming a list...

    Thanks for any ideas to kick around... going to be a LONG winter for me...

    Oh yeah, I have those 2 model kits, too...
    Logged
    1971 Challenger - AutoX project
    2015 Dart GT - Daily Driver


    Offline Jamiez

    • Sr. Member
    • ****
    • Posts: 1981
    • Retro
    Re: Basement resto projects
    « Reply #1 on: November 27, 2011 - 06:20:07 PM »
    My winter projects are mostly interior work.  I've already pulled the rear seats and started cleaning them.  Eventually I'll pull the fronts and do the same.  I also plan to clean the door cards, kick panels, quarter trim, etc.  Aside from the rear seats, most of these pieces are pretty small and can be easily transported.  I may get ambitious and remove the center console for cleaning.  Fortunately the car is stored in my attached garage so I might just clean the console in place.

    Logged

    Offline MEK-Dangerfield

    • C-C.com Expert
    • ********
    • Posts: 20946
    • I don't get NO respect! Member since 1/25/2002
    Re: Basement resto projects
    « Reply #2 on: November 27, 2011 - 07:58:07 PM »
    I'm just glad I made it thru another year without braking down.   :lol:

    To be honest, I haven't decided on what my next project will be...Although I've been procrastinating the last 2 years about headlight relays.   :walkaway:
    Logged

    Mike

    1970 Challenger - SOLD
    2016 SXT+.  1 of 524 SXT+'s in Plumb-crazy for 2016.

    Offline AARuFAST

    • AARuFAST
    • Resident
    • *****
    • Posts: 2154
    Re: Basement resto projects
    « Reply #3 on: November 27, 2011 - 09:07:42 PM »
    Already started on winter projects
    Refurbished my original 3 speed wiper motor,
    .
    Internal wires are covered with a special mesh sleeve.
    You can see in the pictures.
    Kim Passion4Mopars provided the kit,

    « Last Edit: November 27, 2011 - 09:11:35 PM by AARuFAST »
    Logged
    1970 AAR Cuda
    1970 Gran Coupe Ragtop. 1 of 66
    Gran Cpe Convertible 1 yr only.

    " I Want to Ride "

    " I tried to be normal once...
    it was the most boring
    2 minutes of my life!!!!"

    Offline jimynick

    • Resident
    • *****
    • Posts: 4512
    Re: Basement resto projects
    « Reply #4 on: November 27, 2011 - 10:24:42 PM »
    Looks good. Mind me asking how you re-coloured the motor housing and what the kit costs? Thx.
    Logged

    Offline AARuFAST

    • AARuFAST
    • Resident
    • *****
    • Posts: 2154
    Re: Basement resto projects
    « Reply #5 on: November 27, 2011 - 11:07:13 PM »
    Quote from: jimynick on November 27, 2011 - 10:24:42 PM
    Looks good. Mind me asking how you re-coloured the motor housing and what the kit costs? Thx.

    Paint kit from Eastwood. Free shipping till 12/31
    Contact Kim at Passion4mopars for kit.


    AARuFAST
    Logged
    1970 AAR Cuda
    1970 Gran Coupe Ragtop. 1 of 66
    Gran Cpe Convertible 1 yr only.

    " I Want to Ride "

    " I tried to be normal once...
    it was the most boring
    2 minutes of my life!!!!"

    Offline hemiken

    • Sr. Resident
    • ******
    • Posts: 8785
    • Hemi-fied Mopar in Australia
    Re: Basement resto projects
    « Reply #6 on: November 27, 2011 - 11:13:14 PM »
     :iagree: with all, you could remove parts as you see fit, restore them yourself, and if you do not have the ability to do some of the more specialty work, you could always sift through and find members here that offer services to fit your needs :2thumbs:
    Logged
    1970 Barracuda   (O^--^===|===^--^O)
    1971 Barracuda   (O O {]{]{]|[}[}[} O O)
    1970 Challenger  (O O [======R/T=] O O)
    1971 Challenger  (O O ===== ===== O O)
    I pay homage to the best Mopars ever built.

    Offline 360FISH

    • Full Member
    • ***
    • Posts: 705
    • BS23H3B567746
    Re: Basement resto projects
    « Reply #7 on: November 30, 2011 - 02:07:12 AM »
    When you don't have a lot of time or can't think of what to do next...  find a nice warm cozy chair for the garage and have a beer with your ride...  :)
    Have enough of them and the car will tell you what it wants...

     :bigsmile:
    Logged
    1973 ‘Cuda   Semi-Pro Touring
    360 SB - 518/OD auto tranny - FAST EZ EFI - Edelbrock Fuel sump - HHR fan
    Hella H4 headlights on relays - 97 Dodge Avenger seats - Chin spoiler - Bumpers pulled in to ’72 offset

    Build: http://www.cuda-challenger.com/cc/index.php?topic=74674.0

    Offline GranCuda1970

    • Sr. Resident
    • ******
    • Posts: 5515
    • Rev 20:4. Mat 6:33 John 1:3 Mat 26:41
    Re: Basement resto projects
    « Reply #8 on: November 30, 2011 - 02:08:28 AM »
     :roflsmiley:
    Logged

    Offline 72rtchallenger

    • Sr. Member
    • ****
    • Posts: 1734
    • 72 to 70 clone
      • cardomain
    Re: Basement resto projects
    « Reply #9 on: November 30, 2011 - 06:38:45 AM »
    need to pull out the seats and carpet and put some sound barrier in
    Logged
    72rtchallenger
    my challengers restro at http://www.cardomain.com/ride/399010
    what happens in the garage
    stays in the garage

    Offline Super Blue 72

    • Permanent Resident
    • *******
    • Posts: 12711
    • "Big 'n Little" Member since 8/9/05
      • Phil's Super Blue '72
    Re: Basement resto projects
    « Reply #10 on: November 30, 2011 - 09:45:16 AM »
    Quote from: 360FISH on November 30, 2011 - 02:07:12 AM
    When you don't have a lot of time or can't think of what to do next...  find a nice warm cozy chair for the garage and have a beer with your ride...  :)
    Have enough of them and the car will tell you what it wants...

     :bigsmile:

     :smilielol:

    Well, what was supposed to be a quick job may be a winter project-Thermoquad rebuild.  Just have to find time/space as I like to spread out everything but no space in the basement to do this without someone bumping into the table and want to find a good chunk of time.  Otherwise I'll get the carb apart then I'll forget how to put it back together....  :bricks1:
    Logged
    1972 Dodge Challenger Rallye 340, AT, Code TB3=Super Blue, SBD=8/17/1971.  Yes, a Rallye without the fender louvers from the factory because of the body side molding option.

    Pic #2 and 3 of my ARII 1/24 scale model car 

    Phil in New England-Massachusetts  Always thank God for what you have!

    http://www.cardomain.com/ride/456046/1972-dodge-challenger

    Offline burdar

    • Sr. Resident
    • ******
    • Posts: 5925
    Re: Basement resto projects
    « Reply #11 on: November 30, 2011 - 09:58:24 AM »
    Two winters ago it was the heater box.  Last winter was the entire dash assembly.  This winter is the steering column.
    Logged

    Offline AARuFAST

    • AARuFAST
    • Resident
    • *****
    • Posts: 2154
    Re: Basement resto projects
    « Reply #12 on: December 01, 2011 - 08:51:28 PM »
    Well, what was supposed to be a quick job may be a winter project-Thermoquad rebuild.  Just have to find time/space as I like to spread out everything but no space in the basement to do this without someone bumping into the table and want to find a good chunk of time.  Otherwise I'll get the carb apart then I'll forget how to put it back together....  :bricks1:
    [/quote]


    That is where ur camera comes in play for any resto work. Take pics as u dismantel. 
    Logged
    1970 AAR Cuda
    1970 Gran Coupe Ragtop. 1 of 66
    Gran Cpe Convertible 1 yr only.

    " I Want to Ride "

    " I tried to be normal once...
    it was the most boring
    2 minutes of my life!!!!"

    Offline jimynick

    • Resident
    • *****
    • Posts: 4512
    Re: Basement resto projects
    « Reply #13 on: December 01, 2011 - 10:09:50 PM »
    Be careful when you disassemble that carb! If memory serves, there are black O-rings in the bottom of the booster wells in the black carb body and you can easily miss them and toss them out as you dump clean the body. Don't ask me how I know this, but be assured that it'll piss gas into the engine like a drunken sailor.  :-[
    Logged

    Offline Super Blue 72

    • Permanent Resident
    • *******
    • Posts: 12711
    • "Big 'n Little" Member since 8/9/05
      • Phil's Super Blue '72
    Re: Basement resto projects
    « Reply #14 on: December 01, 2011 - 11:09:07 PM »
    Quote from: AARuFAST on December 01, 2011 - 08:51:28 PM
    That is where ur camera comes in play for any resto work. Take pics as u dismantel. 

    Gotcha, will do!  :thumbsup:


    Quote from: jimynick on December 01, 2011 - 10:09:50 PM
    Be careful when you disassemble that carb! If memory serves, there are black O-rings in the bottom of the booster wells in the black carb body and you can easily miss them and toss them out as you dump clean the body. Don't ask me how I know this, but be assured that it'll piss gas into the engine like a drunken sailor.  :-[

    Thanks for the tip!  :thumbsup: I'm thinking this might be the cause of my problem, or the needle not seating.  I was having hard starts after running and I noticed after the engine was shut off I saw gas dripping outside the carb, passenger side, from the primary throttle shaft.  Figured the hard restart was due to flooding.  Or else it may have been after changing out the gas tank some sediment is caught in the seat area for the needle.  I dunno...  :dunno:

    We shall see.....  :popcorn:
    Logged
    1972 Dodge Challenger Rallye 340, AT, Code TB3=Super Blue, SBD=8/17/1971.  Yes, a Rallye without the fender louvers from the factory because of the body side molding option.

    Pic #2 and 3 of my ARII 1/24 scale model car 

    Phil in New England-Massachusetts  Always thank God for what you have!

    http://www.cardomain.com/ride/456046/1972-dodge-challenger
    Pages: [1]
    « previous next »