what parts are different between manual and power brakes?

[brads70]

Besides the booster and M/C what else is different? Reason I am asking is I'm wanting to swap over to a Hydroboost system this winter and want to use the bell crank that comes with the power brake set up. Looking at other members photo's I can see that on a power brake set up the booster is mounted higher. My car now is a manual brake car so that's all I have to go on? So what all is different? I assume the reinforcing plate on the firewall is different, but what about the pedal bracket under the dash?   anything else ?  

[Chryco Psycho]

under dash is all the same , you may not need the power brake linkage depending how you mount the hydroboost unit , you should be able to get away with a straight pushrod

[ted]

fire wall plate is different

[Talkwrench]

is the pedal different? normally there will be a ratio difference on cars between manual and power..

[Chryco Psycho]

pedal is the same for both

[brads70]

under dash is all the same , you may not need the power brake linkage depending how you mount the hydroboost unit , you should be able to get away with a straight pushrod

Some members are saying it's too sensitive with the straight pushrod? Just thought I would round up all the parts I need just in case I find that too?

[brads70]

fire wall plate is different

I agree! Thanks!    I wonder if there is anything else?

[dodj]

Pic help?

[brads70]

Pic help?

Ya thanks! Looks like it moves the M/C up about 1"-1 1/2"  or so? So I must need the firewall plate too! I just checked my pedal and just like CP said ..it's the same!
Thanks