Author Topic: 1970 challenger console (Read 1908 times)

mopar397 · « **on:** January 13, 2012 - 12:35:58 PM »

i am trying to do some research about my 1970 challenger. and i was wondering about the center console. what is the difference between the automatic console and the standard shift console? can i use a automatic console for a manual shift tranny?

Jamiez · « **Reply #1 on:** January 13, 2012 - 12:41:19 PM »

The shifter hole is a different size, with the manual hole being larger. They make a template to cut an auto into a manual and I think some members here have done so.

This might be helpful as it shows some pictures comparing the two:

http://www.cuda-challenger.com/cc/index.php?topic=81152.0

Chryco Psycho · « **Reply #2 on:** January 13, 2012 - 04:38:05 PM »

you do need a different top plate for the 4 spd

mopar397 · « **Reply #3 on:** January 14, 2012 - 10:10:24 AM »

thanks for the help

Cuda416 · « **Reply #4 on:** January 17, 2012 - 07:27:00 AM »

The bottom of the console, where it meets the floor is different. And auto will not sit on a manual floor hump and must be cut. I'd imagine that a foot speed console would have trouble on a not manual floor but I'm not sure.

Fern · « **Reply #5 on:** January 17, 2012 - 05:36:03 PM »

Ebay has templates to convert the auto to manual

http://www.ebay.com/itm/4-Spd-Console-cutout-TEMPLATE-Cuda-Challenger-E-B-BODY-/170752683329?hash=item27c1a72d41&item=170752683329&pt=Vintage_Car_Truck_Parts_Accessories&vxp=mtr

Author Topic: 1970 challenger console (Read 1908 times)

mopar397

1970 challenger console

Jamiez

Re: 1970 challenger console

Chryco Psycho

Re: 1970 challenger console

mopar397

Re: 1970 challenger console

Cuda416

Re: 1970 challenger console

Fern

Re: 1970 challenger console