Anyone installed a crate 360/300 in a Cuda?

News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1] 2

    Author Topic: Anyone installed a crate 360/300 in a Cuda?  (Read 1899 times)

    Offline bs549

    • Jr. Member
    • **
    • Posts: 82
    Anyone installed a crate 360/300 in a Cuda?
    « on: January 26, 2005 - 09:49:13 PM »
    Am thinking about replacing my worn out 383 in my 74 Cuda with one of the Mopar crate 360 Magnums.  Not knowing what I'd be getting myself into, has anyone installed one of the crate engines, and if so, what would else would I need or be aware of in installing the 360?

    Thanks!
    Logged


    Offline RollingThunder

    • Jr. Member
    • **
    • Posts: 24
    Re: Anyone installed a crate 360/300 in a Cuda?
    « Reply #1 on: January 26, 2005 - 11:32:22 PM »
    i put one in my Charger - get Schumacher mounts or mounts for a 340/360 Cuda...    Bellhousing/trans is different, need a weight set for the magnum balance, exhaust manifolds will be different   pulleys and brackets will be different     

    [attachment deleted by admin]
    Logged

    Offline 1973challenger360

    • Resident
    • *****
    • Posts: 2385
    Re: Anyone installed a crate 360/300 in a Cuda?
    « Reply #2 on: January 27, 2005 - 03:01:40 PM »
    personally Id pay the extra 500.00 and get the 380hp , every thing you have to change to go to any small block, will work on this motor.

    Logged
    1965 barracuda. Was 273/2 904 car had 440 360 in plans
    1996 Dodge 1500 ST 5.2 Np3500 4x2 club cab short bed

    2008 Veracruz AWD Limited     I pay she drives

    Offline bs549

    • Jr. Member
    • **
    • Posts: 82
    Re: Anyone installed a crate 360/300 in a Cuda?
    « Reply #3 on: January 27, 2005 - 09:35:50 PM »
    RollingThunder...thanks for the advice, and the pics!   Anyone else out there drop in one of the 360 Magnums?

    I'm leaning towards the 300hp vs the 380hp, only because this will be a 99% daily street driver....had heard the 380hp would be a bit much for just the street.
    Logged

    Offline 4Cruizn

    • Administrator
    • C-C.com Expert
    • *****
    • Posts: 18521
    • HEMI FISH
    Re: Anyone installed a crate 360/300 in a Cuda?
    « Reply #4 on: January 27, 2005 - 11:15:10 PM »
    Quote from: bs549 on January 27, 2005 - 09:35:50 PM
    had heard the 380hp would be a bit much for just the street.


    ummmmm   I'm sorry . . . I mean no disrespect.   1500 horses might be alittle too much for the street (maybe) . . . the crate motor for alittle extra money . . .  will definitely be a sweet setup for you!  GO FOR IT!!  No worrys MATE!   :worship:  :worship:  :worship:  :worship:
    Logged

    Offline ragtopdodge

    • Resident
    • *****
    • Posts: 4065
    Re: Anyone installed a crate 360/300 in a Cuda?
    « Reply #5 on: January 28, 2005 - 02:47:03 AM »
    Logged
    '70 318-auto Chally 'vert
    '71 383-auto 'Cuda 'vert (sold)
    06 300c SRT8
    04 2500 QCLB 4x4 HO

    Offline moparnut

    • Resident
    • *****
    • Posts: 2410
    • Nutin like a nice Piece of Hickory"Clint Eastwood
      • My Photo's
    Re: Anyone installed a crate 360/300 in a Cuda?
    « Reply #6 on: January 28, 2005 - 09:49:48 AM »
    I'd opt to rebuild that 383 with everything you want in it.The crates have a cast crank and your 383 has a forged.You could build one nice 383 for the money it cost you for a crate and it would be different than all the 360's in countless new mopars on the street.My 2 cents worth.My 383 for my barracuda cost me about 1800-2k to build.906 rebuilt heads w harden seats,9.5 hyper pistons,balanced blueprinted,525 lift engle custom grind cam(recommended by CHryco Psyco).You can typically get engine parts cheap on epay.Got my hyper pistons for 125 bucks,brand new and most of the internal components except the cam.This way you can also say you had alot to do with building your own motor
    Logged
    70 Barracuda Gran Coupe,383-4bbl,# Match
    2012 Subaru Forester
    70 D100 Adventurer 383 pickup
    02 F250 S'cab Powerstroke 7.3 4x4 6 speed Manual
    06 Honda VTX1800S Spec 3

    Offline 1973challenger360

    • Resident
    • *****
    • Posts: 2385
    Re: Anyone installed a crate 360/300 in a Cuda?
    « Reply #7 on: January 28, 2005 - 04:37:58 PM »
    I dont personaly like bb in non  70-71 cars, there cool in older stuff but sb's are potent
    Logged
    1965 barracuda. Was 273/2 904 car had 440 360 in plans
    1996 Dodge 1500 ST 5.2 Np3500 4x2 club cab short bed

    2008 Veracruz AWD Limited     I pay she drives

    Offline moparnut

    • Resident
    • *****
    • Posts: 2410
    • Nutin like a nice Piece of Hickory"Clint Eastwood
      • My Photo's
    Re: Anyone installed a crate 360/300 in a Cuda?
    « Reply #8 on: January 28, 2005 - 04:43:16 PM »
    There's no replacement for displacement,and the torque of a BB to get the tires melting.If the car is Non numbers,dont matter anyways whats under the hood,I say 440+6 :driving:
    Logged
    70 Barracuda Gran Coupe,383-4bbl,# Match
    2012 Subaru Forester
    70 D100 Adventurer 383 pickup
    02 F250 S'cab Powerstroke 7.3 4x4 6 speed Manual
    06 Honda VTX1800S Spec 3

    Offline ragtopdodge

    • Resident
    • *****
    • Posts: 4065
    Re: Anyone installed a crate 360/300 in a Cuda?
    « Reply #9 on: January 28, 2005 - 06:58:48 PM »
    Quote from: 1973challenger360 on January 28, 2005 - 04:37:58 PM
    I dont personaly like bb in non  70-71 cars, there cool in older stuff but sb's are potent

    Why's that?  B/c they didn't originally come with them?

    Every '55-'57 Chevy has a 350 chevy in it practically.  Don't like 'em b/c they should have a 265 or 283?  Ditto '32+ street rods; would rather have flat-head V8s?

    I say, the bigger, the better; that's the definition of a musclecar IMHO. :guitar:
    Logged
    '70 318-auto Chally 'vert
    '71 383-auto 'Cuda 'vert (sold)
    06 300c SRT8
    04 2500 QCLB 4x4 HO

    Offline budrinker

    • Full Member
    • ***
    • Posts: 613
    Re: Anyone installed a crate 360/300 in a Cuda?
    « Reply #10 on: January 28, 2005 - 07:04:26 PM »
    id rebuild the 383 and drop it right back in
    Logged

    Offline Robb

    • Sr. Member
    • ****
    • Posts: 1006
    • Member since: March 20, 2003 - 09:52:47 AM
    Re: Anyone installed a crate 360/300 in a Cuda?
    « Reply #11 on: January 28, 2005 - 08:13:38 PM »
    Quote from: budrinker on January 28, 2005 - 07:04:26 PM
    id rebuild the 383 and drop it right back in

    :iagree:
    Logged

    70 Challenger SE  (440 SIX PACK / Keisler 5 speed, R/T SE replication)       68 Sport Satellite Convertible 383 Super Commando / 727  Survivor

    2002 Trans AM WS6 convertible:  DD
    1999 4Runner 4x4:  lifted-locked-armored  expedition vehicle
    1990 Jeep XJ 4x4:  Front Dana 60, GM-14bolt rear, 3 link, 4link, 5.38 detroits, beadlocked 40's, stretched to 110" wb  Rock Crawler

    Offline Rev-It-Up

    • Global Moderator
    • Permanent Resident
    • *****
    • Posts: 10601
    • Member Since 2/20/02
    Re: Anyone installed a crate 360/300 in a Cuda?
    « Reply #12 on: January 28, 2005 - 08:29:35 PM »
     :iagree: Yep, if I had to make the decision, that's what I would do.  The bigger, the better!
    Logged
    Rev-It-Up                                                             Yes, I'm a girl!
                             

    Offline 1973challenger360

    • Resident
    • *****
    • Posts: 2385
    Re: Anyone installed a crate 360/300 in a Cuda?
    « Reply #13 on: January 28, 2005 - 10:35:54 PM »
    to much weight , less space, more expensive and thats why they made <71    I like to see a 318,340,360,416 in them. not 440's and 383's
    Logged
    1965 barracuda. Was 273/2 904 car had 440 360 in plans
    1996 Dodge 1500 ST 5.2 Np3500 4x2 club cab short bed

    2008 Veracruz AWD Limited     I pay she drives

    cudahob

    • Guest
    Re: Anyone installed a crate 360/300 in a Cuda?
    « Reply #14 on: January 29, 2005 - 07:52:06 AM »
    Don't listen to them,  :laughup: 360 all the way  :thumbs:  :beer:
    Logged
    Pages: [1] 2
    « previous next »