need cup holders for your E-Body?

[spamtank]

The plastic next to the seat job was available in stock at Autozone.

It might be interesting to design up an ashtray plug in version and have it rapid prototyped on a 3d printer.  Probably be pretty expensive though.

[ShelbyDogg]

WalMart has it too.  About $5.

[Katfish]

Guess I should have checked Wally World.
For $6 it's about the best I can hope for.
Got it at local AutoZone.

[PlumCrazyChris]

Looks like the cupholder Brad's talking about is listed for the volkswagon beatle. 

http://www.metropartsmarket.com/catalog/consoleanddrinkholder-c5s4.html

Any way to check?

['Cuda Hunter]

Is that one the kind that fits in the ash tray?

[ted]

yes

['Cuda Hunter]

And they have different colors.  Red also.

has anyone actually used this cup holder?
Does it work?

[ted]

those are made for many cars, highly doubt 1 designed a a vw bugb fits a mopar E  body

[72ls5fla]

I just purchased that cup holder - got at it a Pep Boys.

Works like a charm.   It slides beetween the seat and console, and even kind of hooks in. 
Very stable and holds drink okay.   

Works with normal sized water and soda bottles/cups.

[Topcat]

And now you can get a french Fry holder to fit into your cup holder.   


http://on.aol.com/video/mcdonalds-japan-introduces-french-fry-holders-for-the-car-517751038?hp=1&playlist=127158&icid=maing-grid7%7Cmain5%7Cdaily-buzz12%7Csec13_lnk1%7C301754

[IMNCARN82]

Drew here has a really cool little billet cup holder fit into his center console. It slips into an almost completely hidden location. Very classy.  Maybe I can find a pic...

[drewcrane]

Drew here has a really cool little billet cup holder fit into his center console. It slips into an almost completely hidden location. Very classy.  Maybe I can find a pic...

I took a couple the car is still dirty from the desert trip, but I have several consoles so I decided to carve one up ,and I found this unique cupholder form a company called Santana , I did this 10 years ago so I am not sure if  they are still around and sure enough they are and they have some new designs , but the holder works very well ,only problem is it only holds one

http://www.google.com/imgres?imgurl=http://www.solsticeforum.com/photopost/direct_data/3012/medium/IMAG0643.jpg&imgrefurl=http://www.solsticeforum.com/forum/f62/santana-cup-holder-71775/&h=700&w=419&sz=73&tbnid=wpY7yHi4hsUGIM:&tbnh=90&tbnw=54&zoom=1&usg=__Eqlei-_uX2HGFSKhfq7xM0OCsPA=&docid=N2zo0ofwagkzRM&sa=X&ei=6cJ1UZLcNIiiiQLA34HgCA&ved=0CDkQ9QEwAQ&dur=321

[brads70]

I took a couple the car is still dirty from the desert trip, but I have several consoles so I decided to carve one up ,and I found this unique cupholder form a company called Santana , I did this 10 years ago so I am not sure if  they are still around and sure enough they are and they have some new designs , but the holder works very well ,only problem is it only holds one

http://www.google.com/imgres?imgurl=http://www.solsticeforum.com/photopost/direct_data/3012/medium/IMAG0643.jpg&imgrefurl=http://www.solsticeforum.com/forum/f62/santana-cup-holder-71775/&h=700&w=419&sz=73&tbnid=wpY7yHi4hsUGIM:&tbnh=90&tbnw=54&zoom=1&usg=__Eqlei-_uX2HGFSKhfq7xM0OCsPA=&docid=N2zo0ofwagkzRM&sa=X&ei=6cJ1UZLcNIiiiQLA34HgCA&ved=0CDkQ9QEwAQ&dur=321

That's pretty slick! 

[high perf mopar]

Guess I should have checked Wally World.
For $6 it's about the best I can hope for.
Got it at local AutoZone.

just bought that one also...wedged it in there just like your pic,,was being too careful until i started asking myself why mine doesn.t sit like yours,,,then flexed the wings and in it went,,,