Eddy heads, off my race car, 900 bucks. They have been shaved 045 thou intake face cut as well, so your intake bolts right on. Around 78 cc now, was 84 cc.
Arp head bolt set, 60 bucks, or head stud set 80 bucks
Donovan gear drive, same as milodon, 325
fluid damper, I have 2 125 each
1 new in box 392 hemi fluid damper, 200, never opened
Also like new torker super vic with 2 passes on it.. 225
Msd distributor. Advance locked down, but I can unlock it. 125
Chrome mopar timing cover....20
Crane gold roller rockers, 1.5 ratio, with thick hardend shafts, 200
milodon dragster pan, not new, but works good, 100 bucks
New Indy dual plane , (cuda Guys) new 200
520 rb short block 2 1/8th mile passes since fresh, ross forged flat tops, 440 source steel 7.100 rods, 4.37 stroke 440 source crank, aluminum mains, main girdle, total seal rings, clevite race bearings std std, 69 block square decked. 2600 bucks. you wont, come close to buying the parts and building this for this money.
The engine is still installed, I can start breaking it down at anytime, went with a bigger B1 engine. Im located in N. Alabama I prefer the short block to be picked up in person.
Pm me if interested, these parts are in my shop. Cudahunter, Bullitt99 Wade, and a few others have viewed my shop and parts.
