News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: what hardware on gas tank filler neck seal  (Read 1850 times)

    Offline black71

    • Full Member
    • ***
    • Posts: 730
    • eph 6:12
    what hardware on gas tank filler neck seal
    « on: April 01, 2012 - 07:16:01 PM »
    Where the filler neck attaches to the tank, should there be a clamp or something on the seal?
    Logged


    Offline DAYLEY/CHALLENGER

    • Resident
    • *****
    • Posts: 3157
    • Still My Inspiration..1971, Rockingham, Nc
    Re: what hardware on gas tank filler neck seal
    « Reply #1 on: April 01, 2012 - 07:32:25 PM »
    No............the rubber ring secures itself to the tank via the groove in the ring.   The filler tube just slides in and is a pressure fit.........it is tight...........Thought I had a pic but can't find it..........
    Logged
    Dave or David

    Offline black71

    • Full Member
    • ***
    • Posts: 730
    • eph 6:12
    Re: what hardware on gas tank filler neck seal
    « Reply #2 on: April 01, 2012 - 07:52:19 PM »
    Quote from: DAYLEY/CHALLENGER on April 01, 2012 - 07:32:25 PM
    No............the rubber ring secures itself to the tank via the groove in the ring.   The filler tube just slides in and is a pressure fit.........it is tight...........Thought I had a pic but can't find it..........

    Gotcha! I'm just a dweeb and put it on wrong
    Logged

    Offline elmoska

    • Jr. Member
    • **
    • Posts: 155
    Re: what hardware on gas tank filler neck seal
    « Reply #3 on: January 02, 2013 - 05:40:46 PM »
    i did not want to start another topic and i found nothing in the search field... is there a gasket between the filler neck and the quarter panel where the 4 bolt goes ??

    and what does those bolt look like ???
    Logged
    1974 challenger on its way..

    Offline HP_Cuda

    • Hit the skinny little pedal on the right!
    • Sr. Resident
    • ******
    • Posts: 5268
    • Mopar or No Car!
    Re: what hardware on gas tank filler neck seal
    « Reply #4 on: January 02, 2013 - 07:25:26 PM »

    I think you mean trunk pan.

    So there is a circular gasket that goes over the filler and then seats in the tank via the groove, then there is a rectangular rubber cover/gasket that connects to the floor of the trunk via 4 screws.
    Logged
    1970 Cuda Clone 440 4 speed - sublime green
    1970 Cuda 383 4 speed - yellow - SOLD

    Offline elmoska

    • Jr. Member
    • **
    • Posts: 155
    Re: what hardware on gas tank filler neck seal
    « Reply #5 on: January 02, 2013 - 08:51:36 PM »
    he're what i'm talking about...




    not this part..


    Logged
    1974 challenger on its way..

    Offline HP_Cuda

    • Hit the skinny little pedal on the right!
    • Sr. Resident
    • ******
    • Posts: 5268
    • Mopar or No Car!
    Re: what hardware on gas tank filler neck seal
    « Reply #6 on: January 02, 2013 - 09:05:14 PM »

    I believe there is a circular foam gasket that goes between the quarter panel and the filler.
    Logged
    1970 Cuda Clone 440 4 speed - sublime green
    1970 Cuda 383 4 speed - yellow - SOLD

    Offline Topcat

    • C-C.com Expert
    • ********
    • Posts: 15376
    • Member since 9/16/04
    Re: what hardware on gas tank filler neck seal
    « Reply #7 on: January 02, 2013 - 09:06:26 PM »
    Everyone here likes helping answer questions; but it's starting to look like you might need some Literature that'll answer many questions you've been posting recently.

    These are 3 that I would recommend looking into.

    http://www.amazon.com/1974-Dodge-Chassis-Service-Manual/dp/B0019Y5WN6/ref=sr_1_1?ie=UTF8&qid=1357178166&sr=8-1&keywords=1974+dodge+chassis+manual

    http://www.diyrepairmanuals.com/proddetail.asp?prod=74DodChalS

    http://mmcdetroit.com/Market_Place/E_body/cover_volume1.html

    The MMC Detroit book along with the AMK catalog with really help you identify what goes where.

    http://amkproducts.com/Catalog_PDF.htm



    Logged
    Mike, Fremont, CA.

    Offline elmoska

    • Jr. Member
    • **
    • Posts: 155
    Re: what hardware on gas tank filler neck seal
    « Reply #8 on: January 03, 2013 - 10:45:12 PM »
    i'm looking for a book ..but what does ..paperback mean ?
    Logged
    1974 challenger on its way..

    Offline Jamiez

    • Sr. Member
    • ****
    • Posts: 1981
    • Retro
    Re: what hardware on gas tank filler neck seal
    « Reply #9 on: January 03, 2013 - 10:48:16 PM »
    Paperback refers to the binding and cover. A paperback has a soft cover and a glue binding.
    Logged
    Pages: [1]
    « previous next »