E-body part out (one 73 Cuda and one 73 Barracuda)

News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: 1 [2] 3 4 ... 7

    Author Topic: E-body part out (one 73 Cuda and one 73 Barracuda)  (Read 30798 times)

    Offline diyhemi.com

    • Full Member
    • ***
    • Posts: 819
    • Formerly Yellowfin
      • DIYHEMI.COM
    Re: E-body part out (one 73 Cuda and one 73 Barracuda)
    « Reply #15 on: June 03, 2012 - 07:38:00 AM »
    Quote from: drewcrane on June 02, 2012 - 10:47:52 AM
    I sent a pm ,I can wait :bigsmile: :popcorn:

    replied   :bigsmile:

    Quote from: C O D Y on June 01, 2012 - 12:41:36 AM
    I would take a set of these if you have them....  (they hold the rear trim on, one on the floor and the other inside the quarter window area)

    Sorry, I don't have the retainer clips  :(
    « Last Edit: June 03, 2012 - 07:39:33 AM by YellowFin »
    Logged
    1970 Barracuda Gran Coupe, gen III project (Cone Killing Cuda)


    Offline 72cudamaan

    • Resident
    • *****
    • Posts: 3248
    Re: E-body part out (one 73 Cuda and one 73 Barracuda)
    « Reply #16 on: June 03, 2012 - 06:52:58 PM »
    Do you have any tail light retaining studs or the tall nuts for them?
    Logged
    If I cant fix it, it's broke
     
    Andy  (phukker whither)

    Offline diyhemi.com

    • Full Member
    • ***
    • Posts: 819
    • Formerly Yellowfin
      • DIYHEMI.COM
    E-body part out (one 73 Cuda and one 73 Barracuda)
    « Reply #17 on: June 03, 2012 - 09:11:34 PM »
    Quote from: 72cudamaan on June 03, 2012 - 06:52:58 PM
    Do you have any tail light retaining studs or the tall nuts for them?

    Yes, I believe I have the whole set of them still on the silver car
    Logged
    1970 Barracuda Gran Coupe, gen III project (Cone Killing Cuda)

    Offline MirageCuda

    • 1974 Cuda
    • Jr. Member
    • **
    • Posts: 300
    Re: E-body part out (one 73 Cuda and one 73 Barracuda)
    « Reply #18 on: June 03, 2012 - 10:07:40 PM »
    Quote from: YellowFin on May 31, 2012 - 04:21:22 PM
    72-74 cuda tail lamp trim rings (for all 4 in great shape) $45.00
    How much shipped to Denver, CO 80229?
    Logged
    Randy
    1974 Plymouth Cuda
    2006 Dodge Ram 1500 SLT
    1991 Nissan Skyline GTR
    2002 Subaru Impreza WRX

    Offline diyhemi.com

    • Full Member
    • ***
    • Posts: 819
    • Formerly Yellowfin
      • DIYHEMI.COM
    Re: E-body part out (one 73 Cuda and one 73 Barracuda)
    « Reply #19 on: June 04, 2012 - 08:11:45 AM »
    Quote from: MirageCuda on June 03, 2012 - 10:07:40 PM
    How much shipped to Denver, CO 80229?

    add $11 for shipping and I'll send it your way. PM me for payment, paypal preferred as it will automatically create a shipping label and email you the tracking number. I ship UPS
    Logged
    1970 Barracuda Gran Coupe, gen III project (Cone Killing Cuda)

    Offline diyhemi.com

    • Full Member
    • ***
    • Posts: 819
    • Formerly Yellowfin
      • DIYHEMI.COM
    Re: E-body part out (one 73 Cuda and one 73 Barracuda)
    « Reply #20 on: June 04, 2012 - 08:13:00 AM »
    Quote from: 72cudamaan on June 03, 2012 - 06:52:58 PM
    Do you have any tail light retaining studs or the tall nuts for them?


    Yes I believe I have them still on the car. What say, $10 for all of them and I'll put them in the box with the A/C motor?

    I also have a pair of upper door moldings still on the car that I want to let go. The stainless molding that rides on the top of the door near the glass as seen in these pictures. These are the actual pieces. I have access to the matching 1/4 glass and may be able to buy them ( the exact car these came from). Originally off a 1972 B5 on B5 high option car.

    « Last Edit: June 04, 2012 - 08:26:06 AM by YellowFin »
    Logged
    1970 Barracuda Gran Coupe, gen III project (Cone Killing Cuda)

    Offline Detroit Muscle Technologies

    • Jr. Member
    • **
    • Posts: 6
    Re: E-body part out (one 73 Cuda and one 73 Barracuda)
    « Reply #21 on: June 05, 2012 - 03:24:40 PM »
    I need the under dash shoddy pad (the brown felt like rag glued under the cowl). Need it for a template if you can scrape off the original. There should be a large piece and then a smaller "L" shaped piece.

    Could also use the kickpanels IF they have some insulation pieces glued to the back of them.

    Lastly would be interested in the black cardboard piece that goes behind the back seat, the shoddy pad that goes with this cardboard and also the shody pad under the rear window package tray.

    Thanks,

    Jim Fillmore
    Detroit Muscle Technologies
    jamesfillmore@detroitmuscletechnologies
    Logged

    Offline Dusty1

    • Jr. Member
    • **
    • Posts: 313
    • Revived
    Re: E-body part out (one 73 Cuda and one 73 Barracuda)
    « Reply #22 on: June 07, 2012 - 12:27:45 AM »
    Do you have a rally non a/c heater contol
    Logged
    Garys 1972 BS

    Offline cuda joy

    • Jr. Member
    • **
    • Posts: 14
    Re: E-body part out (one 73 Cuda and one 73 Barracuda)
    « Reply #23 on: June 09, 2012 - 11:54:40 AM »
    Hi there Interested in top of door trim pieces  I believe my car might have had them... do they mount with small plastic holders?
    What shape are they in? Can they be polished up? Also how much you asking ? Thanks for reply  Cuda Joy in progress :thumbsup: :working:
    Logged

    Offline diyhemi.com

    • Full Member
    • ***
    • Posts: 819
    • Formerly Yellowfin
      • DIYHEMI.COM
    E-body part out (one 73 Cuda and one 73 Barracuda)
    « Reply #24 on: June 09, 2012 - 08:28:47 PM »
    Floor shift linkage
    Logged
    1970 Barracuda Gran Coupe, gen III project (Cone Killing Cuda)

    Offline diyhemi.com

    • Full Member
    • ***
    • Posts: 819
    • Formerly Yellowfin
      • DIYHEMI.COM
    Re: E-body part out (one 73 Cuda and one 73 Barracuda)
    « Reply #25 on: June 09, 2012 - 08:34:17 PM »
    Quote from: Dusty1 on June 07, 2012 - 12:27:45 AM
    Do you have a rally non a/c heater contol

    Nope, just the standard gauge heater controls, sorry :(

    For all those that I haven't gotten back to yet, please PM me. I have been really tied up at work this week with conferences so I fell behind on this stuff.
    Logged
    1970 Barracuda Gran Coupe, gen III project (Cone Killing Cuda)

    Offline 360FISH

    • Full Member
    • ***
    • Posts: 705
    • BS23H3B567746
    Re: E-body part out (one 73 Cuda and one 73 Barracuda)
    « Reply #26 on: June 15, 2012 - 02:23:15 AM »
    Do you happen to have the plastic "cup" that sits in the inside door handle where the door lock is?  My passengerside one is busted up.

    Thanks

    Alan
    Logged
    1973 ‘Cuda   Semi-Pro Touring
    360 SB - 518/OD auto tranny - FAST EZ EFI - Edelbrock Fuel sump - HHR fan
    Hella H4 headlights on relays - 97 Dodge Avenger seats - Chin spoiler - Bumpers pulled in to ’72 offset

    Build: http://www.cuda-challenger.com/cc/index.php?topic=74674.0

    Offline diyhemi.com

    • Full Member
    • ***
    • Posts: 819
    • Formerly Yellowfin
      • DIYHEMI.COM
    E-body part out (one 73 Cuda and one 73 Barracuda)
    « Reply #27 on: June 16, 2012 - 01:51:38 AM »
    Quote from: 360FISH on June 15, 2012 - 02:23:15 AM
    Do you happen to have the plastic "cup" that sits in the inside door handle where the door lock is?  My passengerside one is busted up.

    Thanks

    Alan

    What color? I think I have some spare white ones.
    Logged
    1970 Barracuda Gran Coupe, gen III project (Cone Killing Cuda)

    Offline 360FISH

    • Full Member
    • ***
    • Posts: 705
    • BS23H3B567746
    Re: E-body part out (one 73 Cuda and one 73 Barracuda)
    « Reply #28 on: June 16, 2012 - 02:01:27 AM »
    Quote from: YellowFin on June 16, 2012 - 01:51:38 AM
    What color? I think I have some spare white ones.

    Ha!  I need  black...  I can paint it.   :2thumbs:

    It's plastic correct? 
    Logged
    1973 ‘Cuda   Semi-Pro Touring
    360 SB - 518/OD auto tranny - FAST EZ EFI - Edelbrock Fuel sump - HHR fan
    Hella H4 headlights on relays - 97 Dodge Avenger seats - Chin spoiler - Bumpers pulled in to ’72 offset

    Build: http://www.cuda-challenger.com/cc/index.php?topic=74674.0

    Offline cuda joy

    • Jr. Member
    • **
    • Posts: 14
    Re: E-body part out (one 73 Cuda and one 73 Barracuda)
    « Reply #29 on: June 16, 2012 - 11:57:49 AM »
    hello, No response to request to top of door pieces .... are they still for sale or not! just want to keep rolling on my project
    Thanks Cuda joy :clueless: :working:
    Logged
    Pages: 1 [2] 3 4 ... 7
    « previous next »