E-body part out (one 73 Cuda and one 73 Barracuda)

[Jack Barnes]

Is the 73 passenger seat still available ? I also need the hood latch for this car.

[mikeyscuda]

is the front bumper and brackets still available? also i would like more info on the two doors.
Thank you

[diyhemi.com]

Most of these parts are gone. I do have the 73 brake booster you speak of in my attic, complete with master and firewall bracket.


Sent from my iPhone using Tapatalk - now Free

[amethyst3500]

I'm looking for rear frame rails for my 1972 Challenger I believe they are the same.

[tuffet1]

how much for the valance insert and do you have a brake booster with bracket

[redo1973]

is the heater box still available?

[v21jeff]

Might you have proportioning valve?

[diyhemi.com]

Valance insert and heater box available. Proportioning valve is gone

Insert I can do $25 plus the ride

Heater box I can do $30 on for non AC


Sent from my iPhone using Tapatalk - now Free

[Dfr360cuda]

Hi
How about a better pic of rear bumperettes ?
Thanx
Dan


 

[Dfr360cuda]

Hi
I took mine off and misplaced one of them
Thanx
Dan


 

[734406cuda]

Are the braces on the cowl that you tack weld the inner fenders to Ans do you have a lower radiator support for 26" call or text 918-605-4889 thanks Andrew

[diyhemi.com]

I will try to get pics of the bumperettes soon. I have a lower 26" radiator support but it is bent. The side support (needed to convert from 22 to 26" is in great shape though


Sent from my iPhone using Tapatalk - now Free

[734406cuda]

On the supports I'm needing the 4 strips that tack to the cowl/firewall Ans the inner fenders tack to them and how bad is the support bent

[diyhemi.com]

The fender to cowl prices that I have were bent to get the upper cowl section off. I slowly bent them by hand and spot weld cut the welds they may be reusable. I need to go check storage this week to see what I have. As far as the lower support, it's bent on the drivers side. My parts car has a straight one and I was going to swap it out with my current 1970 one. Thus I would be letting the 1970 lower support go if you wanted it.

Anyone interested in a solid complete front clip with a 26" radiator opening and AC lower cowl? Subframes good.


Sent from my iPhone using Tapatalk - now Free

[hotrodded1970]

do you have the inner rear  fender housings still available?