Well, today was a good Mopar day...
Started with putting/modifying the fender emblems to facilitate installation. They are the versions with the 3 studs. There was no way I was going to drill holes. So, I cut off the studs and ground them flat. Then, I use the rear window strip. I used the heat gun to make it softer so I could spread it over the backside of the emblem better... Then I put the pentastar on.
Then I added some things from Jaime at MegaParts; the proper radiator overflow hose, tranny linkage clips, tranny cover and various other things.... Tweaked the timing a little and adjusted the idle and kick-down throttle pressure.
I put the front plate bracket on..... Don't fret about the horns.... As soon as we get OEM originals, they will be added..... These are for safety for now......
Hoss-man got the air cleaner powder coated and the lid chromed..