News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: wiring connectors needed  (Read 1283 times)

    Offline cudasteve72

    • Jr. Member
    • **
    • Posts: 319
    wiring connectors needed
    « on: July 02, 2012 - 08:48:13 PM »
    Does any one know where I can get some connectors.  I need the ones that attach to the connectors that come out of the column.  any help is appreciated.
    Steve
    Logged
    1972 Cuda Custom 70 clone  416 stroker 481/531 hp/
    2006 Grand Cherokee SRT8 (daily)
    1970 Challenger convertible 340 (Dad's)
    1967 Dart gt slant six all original 40,000 miles driver but needs restoration (Brother's)
    2011 Jeep Grand Cherokee (wife's)


    Offline rave_12000

    • Jr. Member
    • **
    • Posts: 417
    Re: wiring connectors needed
    « Reply #1 on: July 02, 2012 - 11:48:52 PM »
    i have some old harnesses out there. what year? mike 816-799-8844
    Logged

    Offline cudasteve72

    • Jr. Member
    • **
    • Posts: 319
    Re: wiring connectors needed
    « Reply #2 on: August 25, 2012 - 05:18:58 PM »
    Its for a 72 cuda. I need booth the ignition and turn signal connectors that hook into the ones in the steering column. If you have them?
    Logged
    1972 Cuda Custom 70 clone  416 stroker 481/531 hp/
    2006 Grand Cherokee SRT8 (daily)
    1970 Challenger convertible 340 (Dad's)
    1967 Dart gt slant six all original 40,000 miles driver but needs restoration (Brother's)
    2011 Jeep Grand Cherokee (wife's)

    Offline cudasteve72

    • Jr. Member
    • **
    • Posts: 319
    Re: wiring connectors needed
    « Reply #3 on: March 15, 2013 - 11:01:26 AM »
    Still looking for these.
    Logged
    1972 Cuda Custom 70 clone  416 stroker 481/531 hp/
    2006 Grand Cherokee SRT8 (daily)
    1970 Challenger convertible 340 (Dad's)
    1967 Dart gt slant six all original 40,000 miles driver but needs restoration (Brother's)
    2011 Jeep Grand Cherokee (wife's)

    Offline Jesus H Chrysler

    • Full Member
    • ***
    • Posts: 698
    Re: wiring connectors needed
    « Reply #4 on: March 15, 2013 - 12:25:41 PM »
    If you still have the plastic connectors you may be able to get new metal pins here:  http://www.repairconnector.com/categories/MISCELLANEOUS-REPAIR-CONNECTORS/MOPAR/

    If not I believe that there are ignition switches and turn signals available with the correct pigtail connectors already installed.

    https://www.yearone.com/Product/1966-74-a-b-e-body/ng1007

    https://www.yearone.com/Product/1966-74-a-b-e-body/fd93102
    Logged
    Yes I own a 1972 Dodge Challenger Convertible T/A S/E with a 440 Six Pak. Can it get any more wrong?

    {OO /===\ OO}
    (OO==> <==OO)



    Greg, in the middle of MA has:
    1970 Dodge Coronet 440 "Zom Bee"
    1972 Dodge Challenger convertible 440 5 speed.
    1973 Dodge Challenger 318 "Brown Bomber"
    2012 Dodge Challenger R/T Classic Blackberry Pearl.
    2001 Jeep Wrangler locked, lifted and lighted.  "Jeep is a registered trademark of Chrysler Corporation"

    Offline cudasteve72

    • Jr. Member
    • **
    • Posts: 319
    Re: wiring connectors needed
    « Reply #5 on: March 15, 2013 - 12:37:57 PM »
    No i don't have the plastic that"s what i need but on the harness side not the column side.  I'm using a painless kit and it reuses those stock connectors.  (Note to self next project Start with a lot more than with this one.)
    Logged
    1972 Cuda Custom 70 clone  416 stroker 481/531 hp/
    2006 Grand Cherokee SRT8 (daily)
    1970 Challenger convertible 340 (Dad's)
    1967 Dart gt slant six all original 40,000 miles driver but needs restoration (Brother's)
    2011 Jeep Grand Cherokee (wife's)

    Offline Jesus H Chrysler

    • Full Member
    • ***
    • Posts: 698
    Re: wiring connectors needed
    « Reply #6 on: March 15, 2013 - 01:13:09 PM »
    AAAHHHH! Got It.  I thought of that after I posted.  If you have access to junkyards with vintage cars you may be in luck.  Many other Chrysler products from around that time used the same connectors (Full size cars, pickups etc)  I've scavenged harness connectors out of 70's vans that were identical to Challenger pieces.  I don't have a source for new ones unfortunately.  I wish I did, I'm in the process of redoing my whole dash harness currently.
    Logged
    Yes I own a 1972 Dodge Challenger Convertible T/A S/E with a 440 Six Pak. Can it get any more wrong?

    {OO /===\ OO}
    (OO==> <==OO)



    Greg, in the middle of MA has:
    1970 Dodge Coronet 440 "Zom Bee"
    1972 Dodge Challenger convertible 440 5 speed.
    1973 Dodge Challenger 318 "Brown Bomber"
    2012 Dodge Challenger R/T Classic Blackberry Pearl.
    2001 Jeep Wrangler locked, lifted and lighted.  "Jeep is a registered trademark of Chrysler Corporation"

    Offline jhaag

    • Full Member
    • ***
    • Posts: 616
    Re: wiring connectors needed
    « Reply #7 on: March 15, 2013 - 04:57:02 PM »
    I have a complete dash harness that is labeled 1970 Cuda. Ends you need look good. If you are interested in it I will sell it all for $25 plus shipping. If you need photos let me know. I also have 1 from a 72 Challenger with A/C, and a 3rd that I can't identify. Don't know if the ends are the same for all years of e-bodies?
    Logged
    love 70 Challengers

    Offline cudasteve72

    • Jr. Member
    • **
    • Posts: 319
    Re: wiring connectors needed
    « Reply #8 on: March 15, 2013 - 10:26:35 PM »
    Photos would be great.
    Logged
    1972 Cuda Custom 70 clone  416 stroker 481/531 hp/
    2006 Grand Cherokee SRT8 (daily)
    1970 Challenger convertible 340 (Dad's)
    1967 Dart gt slant six all original 40,000 miles driver but needs restoration (Brother's)
    2011 Jeep Grand Cherokee (wife's)

    Offline jhaag

    • Full Member
    • ***
    • Posts: 616
    Re: wiring connectors needed
    « Reply #9 on: March 16, 2013 - 01:32:45 PM »
    Pictures...this harness is tagged as 70 Cuda. I do not know if that is correct.
    Logged
    love 70 Challengers

    Offline cudasteve72

    • Jr. Member
    • **
    • Posts: 319
    Re: wiring connectors needed
    « Reply #10 on: March 16, 2013 - 02:09:06 PM »
    Looks like exactly what I need. How would you like to proced, PayPal?
    Logged
    1972 Cuda Custom 70 clone  416 stroker 481/531 hp/
    2006 Grand Cherokee SRT8 (daily)
    1970 Challenger convertible 340 (Dad's)
    1967 Dart gt slant six all original 40,000 miles driver but needs restoration (Brother's)
    2011 Jeep Grand Cherokee (wife's)

    Offline jhaag

    • Full Member
    • ***
    • Posts: 616
    Re: wiring connectors needed
    « Reply #11 on: March 16, 2013 - 04:30:37 PM »
    PM sent
    Thanks Jon
    Logged
    love 70 Challengers
    Pages: [1]
    « previous next »