Author Topic: Rear Disc Brake Kit, who makes the best one? (Read 6091 times)

73restomod · « **on:** July 19, 2012 - 12:07:01 AM »

I want to upgade to rear disc this fall/winter on my Challenger. I don't want to run the "green" bearings either, car has a factory Spicer sure-grip. I recently had my machinist make new spacers for it out of Tool Steel. Not looking for wild or exotic and It has to have a parking brake. Any suggestions?

brads70 · « **Reply #1 on:** July 19, 2012 - 08:34:39 AM »

I just installed DrDiff rear disc's on my new Dana?

GreenFish · « **Reply #2 on:** July 19, 2012 - 12:12:26 PM »

What does Dr.Diff Charge for just a disc brake kit?

brads70 · « **Reply #3 on:** July 19, 2012 - 12:27:44 PM »

Quote from: GreenFish on July 19, 2012 - 12:12:26 PM

What does Dr.Diff Charge for just a disc brake kit?

I think it's just under $500. I went with the upgraded aluminum caliper mounts and e-cables. Both were $100 each extra I think it was? Cass discounted me 40 bucks because I got my own rotors elseware to match the front rotors.

73restomod · « **Reply #4 on:** July 19, 2012 - 01:22:20 PM »

Very nice

Sent from my DROID RAZR using Tapatalk 2

jimynick · « **Reply #5 on:** July 19, 2012 - 11:24:25 PM »

Brad, are these the Explorer brake?

brads70 · « **Reply #6 on:** July 22, 2012 - 05:14:02 PM »

Quote from: jimynick on July 19, 2012 - 11:24:25 PM

Brad, are these the Explorer brake?

The rotors are 89 Toyota Cressidia, the calipers I think are Cobra" ? What year etc... I don't know I'll have to ask him?

Danishmopar · « **Reply #7 on:** July 28, 2012 - 01:16:32 AM »

Cool rotors

do they have the same messurements as them Dr, diff sells.

brads70 · « **Reply #8 on:** July 28, 2012 - 07:38:27 AM »

Quote from: Danishmopar on July 28, 2012 - 01:16:32 AM

Cool rotors do they have the same messurements as them Dr, diff sells.

Yes exactly the same , Cass told me his kit uses 89 Toyota rotors!

TROUBLE987 · « **Reply #9 on:** August 01, 2012 - 09:30:16 PM »

Brad where did you get the Dana from..did you order it or do it yourself..?

brads70 · « **Reply #10 on:** August 01, 2012 - 09:38:21 PM »

Quote from: TROUBLE987 on August 01, 2012 - 09:30:16 PM

Brad where did you get the Dana from..did you order it or do it yourself..?

I ordered it from DrDiff ( Cass) brand new Strange 60 , tru trac ,oversize tapered roller axel bearings, HD 3/8 retainers, 3:55 gears, rear disc brake kit with upgraded aluminum caliper brackets. 1350 u-joints

Kevin71 · « **Reply #11 on:** August 04, 2012 - 11:37:59 AM »

I put the same rear disc and rear end on my challenger. Put new master cyclinder with larger bore. I couldn't get the brakes to lock up no matter how hard I stomped on them. Ending up adding power to them. Got SSBC front disc. No one I tallked to had any ideas other than it wasn't moving enough fluid. I was wandering if you had a similar problem?

Kevin71 · « **Reply #12 on:** August 04, 2012 - 11:53:41 AM »

Hey do you have a rear sway bar. I put a original style TA on mine and the brackets interffered with the calipers. I had to weld up the hole and move the mount to the inside a little to make sure they cleared everything.

brads70 · « **Reply #13 on:** August 04, 2012 - 01:18:53 PM »

Quote from: Kevin71 on August 04, 2012 - 11:37:59 AM

I put the same rear disc and rear end on my challenger. Put new master cyclinder with larger bore. I couldn't get the brakes to lock up no matter how hard I stomped on them. Ending up adding power to them. Got SSBC front disc. No one I tallked to had any ideas other than it wasn't moving enough fluid. I was wandering if you had a similar problem?

I haven't finished yet so I've never driven it. I have another M/C from Cass ( 1 1/8") that I plan on converting to hydroboost. I have one from a Asrto van.

Quote from: Kevin71 on August 04, 2012 - 11:53:41 AM

Hey do you have a rear sway bar. I put a original style TA on mine and the brackets interffered with the calipers. I had to weld up the hole and move the mount to the inside a little to make sure they cleared everything.

I have a Hotchkis rear sway bar and it fit with no problems.

Kevin71 · « **Reply #14 on:** August 04, 2012 - 04:07:42 PM »

Yea the way the hotkiss mounts I imagine it was no problem. Mine stops fine now, but I wasn't anticipating havng to upgrade further. Every time I upgrade one thing I have change something else. These things are worse than a boat.

Author Topic: Rear Disc Brake Kit, who makes the best one? (Read 6091 times)

73restomod

Rear Disc Brake Kit, who makes the best one?

brads70

Re: Rear Disc Brake Kit, who makes the best one?

GreenFish

Re: Rear Disc Brake Kit, who makes the best one?

brads70

Re: Rear Disc Brake Kit, who makes the best one?

73restomod

Re: Rear Disc Brake Kit, who makes the best one?

jimynick

Re: Rear Disc Brake Kit, who makes the best one?

brads70

Re: Rear Disc Brake Kit, who makes the best one?

Danishmopar

Re: Rear Disc Brake Kit, who makes the best one?

brads70

Re: Rear Disc Brake Kit, who makes the best one?

TROUBLE987

Rear Disc Brake Kit, who makes the best one?

brads70

Re: Rear Disc Brake Kit, who makes the best one?

Kevin71

Re: Rear Disc Brake Kit, who makes the best one?

Kevin71

Re: Rear Disc Brake Kit, who makes the best one?

brads70

Re: Rear Disc Brake Kit, who makes the best one?

Kevin71

Re: Rear Disc Brake Kit, who makes the best one?