Author Topic: Hemi Cuda/Challenger W/O a shaker, air intake set up?  (Read 9715 times)

Offline burdar

  • Sr. Resident
  • ******
  • Posts: 5925
Re: Hemi Cuda/Challenger W/O a shaker, air intake set up?
« Reply #15 on: August 03, 2012 - 12:59:08 PM »
That's a Challenger.  You could get the R/T hood in a Challenger.




Offline TinCuda

  • Sr. Member
  • ****
  • Posts: 1288
    • 'Cuda
Re: Hemi Cuda/Challenger W/O a shaker, air intake set up?
« Reply #16 on: August 05, 2012 - 04:48:55 AM »
I've asked a few experts and all said there were no "dual scoop" hood 70 or 71 Hemi Cudas.  They all came with Shakers. 

Untill you come up with some documentation proving otherwise.

There are no "dual scoop" hood 70 or 71 Hemi cudas? None? None at all?  Not just standard equipment but you are saying none at all?

You can't say that something is 100% true just because someone once told you, then say prove me wrong with documentation.

Ever heard the old phrase "Always lie and demand proof!"

OK, I say, All 1971 Plymouths had a 1943 copper penny glued to the bottom of the brake pedal.

Until you come up with some documentation proving otherwise.


Just in case I lost you here.  You can only make statements that you can prove with documentation, not the other way around.




.,
« Last Edit: August 05, 2012 - 01:45:15 PM by TinCuda »
(O O [             SRT ] O O)
(O O {]{]{]||[}[}[} O O)
{||O||}

2016 Dodge Challenger Hellcat
1971 Plymouth 'Cuda 440-6
2008 Dodge Charger R/T Hemi
2015 Chrysler 200c AWD 3.6L
2000 Yamaha V-Max
Doing my part to leave a big carbon footprint!
Image Hosted by ImageShack.us
Shot at 2012-09-05

Offline kissalien

  • Sr. Member
  • ****
  • Posts: 1170
Re: Hemi Cuda/Challenger W/O a shaker, air intake set up?
« Reply #17 on: August 05, 2012 - 12:39:22 PM »
1970

http://www.hamtramck-historical.com/images/dealerships/DealershipDataBook/1970/70_Barracuda0023.jpg

1971

http://www.hamtramck-historical.com/images/dealerships/DealershipDataBook/1971/71_Barracuda_26.jpg

There is no code for deleting the shaker hood as someone suggested. To delete it would have required something hand written on the order form. The factory would have needed special procedures to handle installing a different air cleaner for something that was probably never going to happen. It makes no sense to have a procedure for something "just in case". More than likely a dealer would have made the conversion, if they could figure out how to make it work.

Offline tman

  • Sr. Member
  • ****
  • Posts: 1331
Re: Hemi Cuda/Challenger W/O a shaker, air intake set up?
« Reply #18 on: August 05, 2012 - 01:19:33 PM »
Hope that settles it.  Tis true it is standard on Hemi Cudas, not on Challengers.  Im sure there is an exception somewhere, but that would be a rare exception.  My Cuda must have lost its penny under the brake pedal.

Offline Super Blue 72

  • Permanent Resident
  • *******
  • Posts: 12711
  • "Big 'n Little" Member since 8/9/05
    • Phil's Super Blue '72
Re: Hemi Cuda/Challenger W/O a shaker, air intake set up?
« Reply #19 on: August 05, 2012 - 02:00:23 PM »

Only Challenger came optional with the shaker hood or dual scoop hood.  And extremely rare T/A Hood.

Are you talking about Challengers in general or Hemi Challengers?  Were there Hemi Challengers that came with a T/A hood? I'm confused...  :clueless:
1972 Dodge Challenger Rallye 340, AT, Code TB3=Super Blue, SBD=8/17/1971.  Yes, a Rallye without the fender louvers from the factory because of the body side molding option.

Pic #2 and 3 of my ARII 1/24 scale model car 

Phil in New England-Massachusetts  Always thank God for what you have!

http://www.cardomain.com/ride/456046/1972-dodge-challenger

Offline kissalien

  • Sr. Member
  • ****
  • Posts: 1170
Re: Hemi Cuda/Challenger W/O a shaker, air intake set up?
« Reply #20 on: August 06, 2012 - 11:26:22 AM »
Are you talking about Challengers in general or Hemi Challengers?  Were there Hemi Challengers that came with a T/A hood? I'm confused...  :clueless:

Yes, I have heard of two of them so far.

Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: Hemi Cuda/Challenger W/O a shaker, air intake set up?
« Reply #21 on: August 06, 2012 - 12:09:24 PM »
never say never , the factory policy was no Hemi Cudas without the Shaker hood , coul dit have been built with something else....  yes the Chall ralley hood air cleaner system would fit . I have also heard of Hemi Challs with the T/A hoods .

Challenger - You`ll wish You Hadn`t

Offline burdar

  • Sr. Resident
  • ******
  • Posts: 5925
Re: Hemi Cuda/Challenger W/O a shaker, air intake set up?
« Reply #22 on: August 06, 2012 - 12:43:15 PM »
The exception with the T/A hoods is that they were an available option.  The scooped hood wasn't an option on a Cuda.  I think the T/A hood was even an option in 71 for awhile.

Offline kissalien

  • Sr. Member
  • ****
  • Posts: 1170
Re: Hemi Cuda/Challenger W/O a shaker, air intake set up?
« Reply #23 on: August 06, 2012 - 05:43:33 PM »
The exception with the T/A hoods is that they were an available option.  The scooped hood wasn't an option on a Cuda.  I think the T/A hood was even an option in 71 for awhile.

Correct on both counts regarding the T/A hoods. Rethinking my earlier post I guess you could    have designated J54 on the order form but the factory would have questioned it and required confirmation of some kind. Not sure how the hemicuda would have got fresh air with a rallye hood though so I can't see this ever having happened. .

Offline diyhemi.com

  • Full Member
  • ***
  • Posts: 819
  • Formerly Yellowfin
    • DIYHEMI.COM
Hemi Cuda/Challenger W/O a shaker, air intake set up?
« Reply #24 on: August 06, 2012 - 06:28:55 PM »
Or what about a hemi Cuda with an AAR hood? Fresh air friendly
1970 Barracuda Gran Coupe, gen III project (Cone Killing Cuda)

Offline Super Blue 72

  • Permanent Resident
  • *******
  • Posts: 12711
  • "Big 'n Little" Member since 8/9/05
    • Phil's Super Blue '72
Re: Hemi Cuda/Challenger W/O a shaker, air intake set up?
« Reply #25 on: August 06, 2012 - 08:10:09 PM »
Yes, I have heard of two of them so far.

Thanks fo rthe info, you always know you stuff.

Is one of the two of those cars you are thinking of El Hemi, a Hemi Challenger that was from Venezuela?  :clueless:
1972 Dodge Challenger Rallye 340, AT, Code TB3=Super Blue, SBD=8/17/1971.  Yes, a Rallye without the fender louvers from the factory because of the body side molding option.

Pic #2 and 3 of my ARII 1/24 scale model car 

Phil in New England-Massachusetts  Always thank God for what you have!

http://www.cardomain.com/ride/456046/1972-dodge-challenger

Offline ChallengerHK

  • Moderator
  • Sr. Resident
  • *****
  • Posts: 7338
  • I'm working on it - No, really
Re: Hemi Cuda/Challenger W/O a shaker, air intake set up?
« Reply #26 on: August 06, 2012 - 10:14:44 PM »
never say never , the factory policy was no Hemi Cudas without the Shaker hood , coul dit have been built with something else.... 

 :iagree: I think that anything that would physically fit could be done, whether or not there was an order code for it. If nothing else, I'm sure any dealer would have been happy to do a swap in order to sell a car.


"She'll make point five past light speed. She may not look like much, but she's got it where it counts, and I've made a lot of special modifications myself."

- Han Solo, Star Wars

Advice Thread - Taking Pictures Of Cars

Offline kissalien

  • Sr. Member
  • ****
  • Posts: 1170
Re: Hemi Cuda/Challenger W/O a shaker, air intake set up?
« Reply #27 on: August 07, 2012 - 12:55:54 PM »
Or what about a hemi Cuda with an AAR hood? Fresh air friendly

Unlike Challengers the AAR hood was only available as part of the Trans Am package.

Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: Hemi Cuda/Challenger W/O a shaker, air intake set up?
« Reply #28 on: August 07, 2012 - 01:01:04 PM »
Unlike Challengers the AAR hood was only available as part of the Trans Am package.

Unless you went to the parts dept LOL

Challenger - You`ll wish You Hadn`t

Offline kissalien

  • Sr. Member
  • ****
  • Posts: 1170
Re: Hemi Cuda/Challenger W/O a shaker, air intake set up?
« Reply #29 on: August 07, 2012 - 01:02:57 PM »
Thanks fo rthe info, you always know you stuff.

Is one of the two of those cars you are thinking of El Hemi, a Hemi Challenger that was from Venezuela?  :clueless:

No, the T/A hood was added to El Hemi.