Author Topic: Shaker Trim Ring Gasket? (Read 1300 times)

Mopar_Mudder · « **on:** July 30, 2012 - 10:59:53 AM »

Is their a seal that goes between the trim ring and the hood for a shaker? I see mension of it in one of my service manuals but see no gasket that came with my shaker kit.

4 speed fish · « **Reply #1 on:** July 30, 2012 - 11:03:44 AM »

Yes there is one.The holes do not like up well.I did not use it.

Topcat · « **Reply #2 on:** July 30, 2012 - 12:09:40 PM »

Don't bother. Waste of money. I tried it and it wasn't even close.

ragtopdodge · « **Reply #3 on:** July 30, 2012 - 01:19:44 PM »

Do you guys just run a bead of silicone or something in between?

Topcat · « **Reply #4 on:** July 30, 2012 - 09:14:51 PM »

Quote from: ragtopchally on July 30, 2012 - 01:19:44 PM

Do you guys just run a bead of silicone or something in between?

Yup, that's probably the best thing. Or you can try to get that sealer rope stuff that's used on the heater boxes from Detriot Muscle Technologies. That's what I'd like to get and re seal mine.

Mopar_Mudder · « **Reply #5 on:** July 31, 2012 - 09:28:30 AM »

Is a seal needed at all, what good does it do?

Author Topic: Shaker Trim Ring Gasket? (Read 1300 times)

Mopar_Mudder

Shaker Trim Ring Gasket?

4 speed fish

Re: Shaker Trim Ring Gasket?

Topcat

Re: Shaker Trim Ring Gasket?

ragtopdodge

Re: Shaker Trim Ring Gasket?

Topcat

Re: Shaker Trim Ring Gasket?

Mopar_Mudder

Re: Shaker Trim Ring Gasket?