Author Topic: Started building the new shop (ALL FINISHED! Photos added on page 18)  (Read 84123 times)

Offline 71gogreen

  • Full Member
  • ***
  • Posts: 687
Re: Started building the new shop
« Reply #195 on: January 08, 2014 - 09:18:52 PM »
Hi Cody,you truly agreat craftsman! hats off! Its beginning to look like Disney World! :grinyes: I bet your neighbors check up on your progress every week!I have one question,did you use hemlock for the trellis with marine varnish? :smokin: :dogpile:
71challenger-millcreek park\71challenger-millcreek




Offline 74 challenge

  • Sr. Member
  • ****
  • Posts: 1247
Re: Started building the new shop
« Reply #196 on: January 09, 2014 - 08:13:24 AM »
when posting that list of cars don't forget!  :useless:
1-8-4-3-6-5-7-2

Offline Cuda Cody

  • Resident
  • *****
  • Posts: 3988
  • Vancouver, WA
Re: Started building the new shop
« Reply #197 on: January 09, 2014 - 10:49:29 AM »
Alan, I really like how organized your parts are and I see some cool stuff!  What year is the fresh air box?  1969?

Anything I would have done differently?  That's a good question.  Nothing comes to the top of my mind right now.  Spent a lot of time planning this before I broke ground and I way over engineered it.  From the 6" slab to the 19.2" on center trusses with 12" cords to the fact I only used stainless or galvanized fasteners for everything on the building.... I didn't cut any corners, best practices and better throughout.  Load bearing walls are double studded 12" on center (normal is one stud every 16", not two every 12"), all non load bearing walls double studded every other stud and all exposed wood is either PT or Cedar.  All the wiring is 10 and 12 gauge throughout the whole building and the roof is a 50 year presidential.  Doing this all myself kept the price down and I spent the savings on better quality material.  The building inspector was blown away and said he had never seen anything like it in his 20 years of inspecting buildings.

However, this summer will be 2 years since I broke ground and I still have about 8 to 12 months left of work to do.  Doing it yourself can take much longer then having it built be a pro.  I can assure you that anyone that wants to build their own shop can do it.  You don't have to do everything, but there's always something you can do to keep the cost down.

As for cars, one of the main reasons for building this shop is to get them all in one location.  They are spread out in two garages about 10 miles apart.  Once I'm done with the shop all the cars will be moved to this location and they will all be in the same place for the first time in my life.  Here's a list of the cars (projects, drivers and restored) 2008 MXT 4x4, 2006 F550 4x4, 2004 Benz SL600 AMG v12 Twin turbo, 2002 Dodge Viper GTS, 2000 F350 4x4, 1995 Land Crusier, 1971 Ford Bronco Yellow, 1971 340 Cuda Purple, 1971 340 Cuda Citron, 1970 Challenger R/T 383 Hemi Orange, 1970 Challenger 318 White, 1970 Challenger 340 T/A Sublime, 1970 Challenger 340 T/A Lemon Twist, 1969 GTX 426 Hemi Blue, 1953 Dodge Power Wagon 4x4.  I'm sure I'm forgetting one, but I'll post photos once they are all in one location.  Better yet, come over and see them in person!  I can't wait to finish the shop so I can have some parties with my car friends.  :cheers:
The funniest thing about this particular signature is that by the time you realize it doesn't say anything it's to late to stop reading it.

Offline stein

  • Jr. Member
  • **
  • Posts: 37
Re: Started building the new shop
« Reply #198 on: January 09, 2014 - 11:43:49 AM »
Super job on the Mopar garage Cody. Plus that is one awesome list of cars! Has to be a great feeling to know that soon they will all be in one place.
Challenger owner since 1977

Offline RzeroB

  • Sr. Member
  • ****
  • Posts: 1496
  • In The Lou and looking for a new (old) ride
Re: Started building the new shop
« Reply #199 on: January 09, 2014 - 11:48:04 AM »
Spent a lot of time planning this before I broke ground and I way over engineered it.  From the 6" slab to the 19.2" on center trusses with 12" cords to the fact I only used stainless or galvanized fasteners for everything on the building.... I didn't cut any corners, best practices and better throughout.  Load bearing walls are double studded 12" on center (normal is one stud every 16", not two every 12"), all non load bearing walls double studded every other stud and all exposed wood is either PT or Cedar.  All the wiring is 10 and 12 gauge throughout the whole building and the roof is a 50 year presidential.  Doing this all myself kept the price down and I spent the savings on better quality material.  The building inspector was blown away and said he had never seen anything like it in his 20 years of inspecting buildings.

Wow! Now that is a quality build!  :clapping:

Hope I'm not out of line here, but curiosity has got the best of me ... you obviously saved tens of thousands $$$ doing the work yourselves ... but what was the cost of this building and were you able to bring it in at, or near, your estimated budget you had before you started??
Cheers!
Tom
St Louis, MO

Former owner of 16 classic Mopars. "It is better to have owned (Mopars) and lost then to have never owned at all" (apologies to Alfred Lord Tennyson)

Offline HP_Cuda

  • Hit the skinny little pedal on the right!
  • Sr. Resident
  • ******
  • Posts: 5268
  • Mopar or No Car!
Re: Started building the new shop
« Reply #200 on: January 09, 2014 - 12:43:34 PM »

Glad to see someone else likes the old Power Wagon series.

Impressive list and I'm diggin on the MXT.  :2thumbs:
1970 Cuda Clone 440 4 speed - sublime green
1970 Cuda 383 4 speed - yellow - SOLD

Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: Started building the new shop
« Reply #201 on: January 09, 2014 - 02:17:51 PM »
Did you sell the V10 ram ?

Challenger - You`ll wish You Hadn`t

Offline Cuda Cody

  • Resident
  • *****
  • Posts: 3988
  • Vancouver, WA
Re: Started building the new shop
« Reply #202 on: January 09, 2014 - 03:44:39 PM »
oops, I knew I would forget some.  Still have the truck and it's one of my all time favorites.  All the power and torque I ever wanted.  Still going strong and all original at 250,000 miles.

As for cost, not 100% sure on the total cost or what I will end up at.  I still have a lot to buy to finish it.  The insurance company sent a guy out to appraise it and he came back at $280K right now.  I'm well under that number with out of pocket costs.


Did you sell the V10 ram ?
The funniest thing about this particular signature is that by the time you realize it doesn't say anything it's to late to stop reading it.

Offline anlauto

  • Permanent Resident
  • *******
  • Posts: 12328
  • I'm Alan G...I'm a Mopar Addict
    • Alan Gallant Automotive Restoration
Re: Started building the new shop
« Reply #203 on: January 09, 2014 - 03:50:05 PM »
....and with the money you saved..... :naughty:

Really, you won't want your new building looking too crowded :nono: ...You should trade me a couple of those project cars for my finished car....after all that hard work building that mansion.....you're going to want a nice purple/white car to hop in and enjoy now... :bigsmile:

Great collection of cars :2thumbs:
I've taught you everything you know.....but I haven't taught you everything I know !
www.alangallantautomotiverestoration.com

Offline Tonefiend

  • ▬▬▬▬ ♫ ♠ ♫ ▬▬▬▬
  • Full Member
  • ***
  • Posts: 987
  • '70 Challenger
    • Ian A. Guitars
Re: Started building the new shop
« Reply #204 on: January 09, 2014 - 06:06:00 PM »
All I can say is Epic!  What a dream.  You know how to live congrats!

Offline spamtank

  • Sr. Member
  • ****
  • Posts: 1665
Re: Started building the new shop
« Reply #205 on: January 09, 2014 - 07:18:57 PM »
Cody,

I hadn't checked in on this thread for a while. 

What an awesome job you guys did there.

You deserve to be very proud!
Rick, Manchester, NH
1970 SE 383 2V AT Challenger
1977 M882/W200 Power Wagon
2013 RT Plus 6M

Offline Cuda Cody

  • Resident
  • *****
  • Posts: 3988
  • Vancouver, WA
Re: Started building the new shop
« Reply #206 on: January 10, 2014 - 01:27:59 AM »
There is a very small list of people I would pay to restore a car and you're on that list.  Whoever buys your Challenger will be getting a super car.

Really, you won't want your new building looking too crowded :nono: ...You should trade me a couple of those project cars for my finished car....after all that hard work building that mansion.....you're going to want a nice purple/white car to hop in and enjoy now... :bigsmile:
The funniest thing about this particular signature is that by the time you realize it doesn't say anything it's to late to stop reading it.

Offline YYZ

  • Jr. Member
  • **
  • Posts: 189
Re: Started building the new shop
« Reply #207 on: January 10, 2014 - 08:12:03 AM »
Congratulations!  That is an impressive and thoughtful build, made all the better by the personal efforts that you and your wife put into it. :cheers:

Offline JS27N0B

  • Resident
  • *****
  • Posts: 4809
  • Member since Jan 28th 2003.
Re: Started building the new shop
« Reply #208 on: January 10, 2014 - 08:25:24 AM »
Nice work, you're a man of many talents!


Sent from my iPad using Tapatalk
1970 Challenger R/T Convertible 383/auto 1 of 516 *now sold after owning for 18yrs
2007 Chrysler Aspen Limited AWD
2013 Tige' RZR 343hp
2016 PCP Challenger SRT Hellcat


Offline anlauto

  • Permanent Resident
  • *******
  • Posts: 12328
  • I'm Alan G...I'm a Mopar Addict
    • Alan Gallant Automotive Restoration
Re: Started building the new shop
« Reply #209 on: January 10, 2014 - 08:37:26 AM »
 :cheers:
I've taught you everything you know.....but I haven't taught you everything I know !
www.alangallantautomotiverestoration.com