Pentastar on lower fender

[RUSTY Cuda]

Funny my 73 does have it & the hole in the fender (probly a 72 fender or the previous owner(s) added it The 74 has none & no hole 
But then again, I welded up all the body side moulding holes on the 73, so I guess you never know!
Funny (well not really) story bout holes, Ron(old body guy) was helpin me do the patches on the front frame rail, there was one bracket bolt hole near the work I had blue marker on it so we could see it & not to weld it, well Ron started doing the spot welds & continued right on to that hole, so it's now solid metal!  Rich.

[blue71cuda]

 If ya need any help swing by. I just live a couple of blocks down from you on 3931 N 68th st. Iv'e been restoring my 71 for 5years now and she's almost finished  :beer: so Iv'e been through all that body and interior stuff. I work from 3:15 p.m. to midnight but stop by anytime Im around all weekend to. Or you can even call me at 467-1623
 Iv'e even started a mopar club here in Neb called Heartland Mopars. So let's get together some time
                 
                                                                                                 Kevin

[daves70]

From the time I had my 440 SIXPACK CONVERTIBLE, there has always been just one on the passenger side front fender. Thats the way my 440 R/T is now too.

[Cannibal94]

Blue71Cuda, Get me some information on that club!  Sounds good to me, we need to get together.  I'll give ya a call this weekend and maybe check out your ride!     :thumbs:

[blue71cuda]

 Sounds sweet!!! I'll be around all weekend. would love to see that kick a$$ convertable you got.

[daves70]

Passenger side only!!!

[Alaskan_TA]

I have seen a couple passenger side Challenger fenders with no holes for the Pentastar now, in both cases the cars had been in accidents when fairly new, and the over the counter replacement fenders did not always have the holes punched for the Pentastar.

T/Ake care,
Barry

[js27]

My challenger did have the hole but it was all original sheet metal. When the car was repainted the body shop took it off and filled the holes in with filler. You can see the big hole with the smaller one on top. Needless to say I fixed that problem when I restore the car.
JS27

[Ghost]

Passenger side only!!!

Holy old thread, Batman!

[whitesatinmopar]

  Someone must have been bored and reading "history" threads,lol. Now I'm not bashing folks, cause I read a lot in the tech post's, still trying to learn and refreash this ole brain.

[JS27N0B]

LOL.

[dix]

THE REAL PENNSTAR WAS A METAL ONE THE YEAR ONE  REPOS ARE PLASTIC WITH A REAL THIN GOLD FILM ON THEM THAT WILL PEAL OFF OR BUFF RIGHT OFF. DIX...

[JS27N0B]

I think the early ones were metal, but the later years were plastic.

[KTO]

My 85 Shelby Charger had a pentastar decal on the passanger side ground effect behind the front tire.

Not sure if it came that way from the plant but it looked OE. I've never seen it on any other turbo 2.2's.

[JS27N0B]

They started that up again with the 93 LH cars.