News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: Rally Hood emblems  (Read 871 times)

    Offline ff6849

    • Jr. Member
    • **
    • Posts: 181
    Rally Hood emblems
    « on: September 17, 2012 - 11:12:06 PM »
    I have a rally hood for my Barracuda, unsure what year it is, it has two small holes in the raised portion on the faux hood scoops.  I am installing the hood on a 73 Barracuda with a 440, which 440 hood emblem would work on this hood, and were all the rally hoods hood emblem mounting holes the same from year to year.
    Logged
    (__________]]]]]}~~~~

    73 440 Cuda'
    915 heads (mild head work, stock bottom end 10/9:1 compression)
    A518 2600-2800 Stall
    4.10 rear gear
    TTI headers with 3' exhaust with  X pipe 
    comp XE274H cam
    Hughes Roller Rockers
    Holley Sniper EFI
    Holley Street Dominator intake
    MSD ignition


    Offline dutch

    • Sr. Resident
    • ******
    • Posts: 6944
    Re: Rally Hood emblems
    « Reply #1 on: September 18, 2012 - 01:42:12 AM »
    mine has 440cuda emblems.  make sure you test fit them before paint, you may have to adjust the holes a bit... most non factory dont fit too nice.
    Logged
    *** Bart ***

    Offline ff6849

    • Jr. Member
    • **
    • Posts: 181
    Re: Rally Hood emblems
    « Reply #2 on: September 19, 2012 - 06:11:46 PM »
    how are  hood emblems installed, never done it before.   
    Logged
    (__________]]]]]}~~~~

    73 440 Cuda'
    915 heads (mild head work, stock bottom end 10/9:1 compression)
    A518 2600-2800 Stall
    4.10 rear gear
    TTI headers with 3' exhaust with  X pipe 
    comp XE274H cam
    Hughes Roller Rockers
    Holley Sniper EFI
    Holley Street Dominator intake
    MSD ignition

    Offline Chryco Psycho

    • Administrator
    • C-C.com Guru
    • *****
    • Posts: 36620
    • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
    Re: Rally Hood emblems
    « Reply #3 on: September 25, 2012 - 08:59:56 AM »
    They just use a retainer with small lock tabs , they slide onto the pins & lock into the metal
    Logged

    Challenger - You`ll wish You Hadn`t

    Offline Bullitt-

    • Permanent Resident
    • *******
    • Posts: 12167
    • Better Things To Come Member Since 2/16/06
    Re: Rally Hood emblems
    « Reply #4 on: September 25, 2012 - 09:15:37 AM »
    Quote from: ff6849 on September 19, 2012 - 06:11:46 PM
    how are  hood emblems installed, never done it before.   


    Barrel Nuts.....I found these at the local Ace Hardware.   



    Logged
    Wade  73 Rallye 340..'77 Millennium Falcon...13 R/T Classic   Huntsville, AL
    Screwed by Photobucket!
    Pages: [1]
    « previous next »