Author Topic: don't know why I didn't join before.......  (Read 3646 times)

Offline marc7071

  • 1971 Dodge Challenger Convertible JH27G1B100192
  • Jr. Member
  • **
  • Posts: 24
don't know why I didn't join before.......
« on: September 24, 2012 - 11:17:00 AM »
I've known of this site for years and have even browsed the forum a few times but, for some unknown reason, had never registered until now.
I am the long-time owner of a 1971 Challenger Convertible. I've owned the car since I was 18 years old in 1988.
Tragically, I recently had a house fire and the Challenger was in my garage that burned to the ground. For anyone interested in seeing the aftermath, this link is to the news station that had a segment on my tragedy featuring the car as part of the story.
http://www.ksdk.com/video/default.aspx?bctid=1759641867001&odyssey=mod|tvideo|article (not spam but there is an advert at the beginning of the video)(car featured aprox. 1 min into the video)
The car was completely burned and I have been trying to cope with it as best I can but I have not given up hope that I might be able to rescue my beloved convertible.
Aside from my love of the cars, I'll be here as part of my information and resource gathering mission to save/restore my car.
Nice to be here and see everyone around the forums.
P.S. I'll eventually be making a post about the tragedy with pictures of what's left of the car so stay tuned.
« Last Edit: September 24, 2012 - 11:23:34 AM by marc7071 »




Offline ksierens

  • Sr. Member
  • ****
  • Posts: 1408
    • 70 Challenger Resurrection
Re: don't know why I didn't join before.......
« Reply #1 on: September 24, 2012 - 11:21:56 AM »
Welcome!  What a tragic loss.
1970 Triple Black Challenger R/T  440 Six Pack - 4 Speed - 3.55 Dana
Kurt - SE Michigan

Offline Oldschool

  • Administrator
  • Permanent Resident
  • *****
  • Posts: 13195
  • Member Since 9-05-06
Re: don't know why I didn't join before.......
« Reply #2 on: September 24, 2012 - 11:58:29 AM »
Sorry about your Chally....   :crying:  Welcome aboard and good luck getting her back on the road....   :wave:
Ken  --  In Georgia

MOPAR-------"Built To Run------Here To Stay"

Offline 4Cruizn

  • Administrator
  • C-C.com Expert
  • *****
  • Posts: 18521
  • HEMI FISH
Re: don't know why I didn't join before.......
« Reply #3 on: September 24, 2012 - 12:05:41 PM »
Glad you joined up but what a sad story!  Curious how much the insurance gave you for the loss . . . . . did you have an appraisal?  Sad situation for sure!   :walkaway:

Offline dutch

  • Sr. Resident
  • ******
  • Posts: 6944
Re: don't know why I didn't join before.......
« Reply #4 on: September 24, 2012 - 01:48:30 PM »
hey Marc,  welcome to CC  :wave:   
so sorry about your car. Looks like a LOT of heat went through.  I don`t want to kill any hope you have left, but on a molecular level, that sheetmetal is most probably destroyed.  If you will be able to get things straight again, the parts that went through this heat will keep on biting you with rust and cracks.  again, I really feel for you, but think twice before dumping loads of money into the car.
Bart
*** Bart ***

Offline brads70

  • C-C.com Expert
  • ********
  • Posts: 18747
Re: don't know why I didn't join before.......
« Reply #5 on: September 24, 2012 - 01:49:48 PM »
Welcome! So sorry about your Challenger!  :crying:
Brad
1970 Challenger 451stroker/4L60 auto OD
Barrie,Ontario,Canada
Proud to own one of the best cars ever made!!!!!

My restoration thread 
http://www.cuda-challenger.com/cc/index.php?topic=59072.0
 My handling upgrade post
http://www.cuda-challenger.com/cc/index.php?topic=73985.0

Offline TorOrange

  • Resident
  • *****
  • Posts: 2289
Re: don't know why I didn't join before.......
« Reply #6 on: September 24, 2012 - 02:46:04 PM »
 :wave: Welcome aboard.

Hope you can save your car.
I believe the structure is usable, but haven't really gotten a 100% yes about that.
As for the sheet metal very likely no.
WANTED 71 cuda / barracuda project. Prefer Black but open.

Offline ChallengerHK

  • Sr. Resident
  • ******
  • Posts: 7338
  • I'm working on it - No, really
Re: don't know why I didn't join before.......
« Reply #7 on: September 24, 2012 - 06:28:59 PM »
Welcome to the site, and good luck in your quest.


"She'll make point five past light speed. She may not look like much, but she's got it where it counts, and I've made a lot of special modifications myself."

- Han Solo, Star Wars

Advice Thread - Taking Pictures Of Cars

Offline Super Blue 72

  • Permanent Resident
  • *******
  • Posts: 12711
  • "Big 'n Little" Member since 8/9/05
    • Phil's Super Blue '72
Re: don't know why I didn't join before.......
« Reply #8 on: September 24, 2012 - 07:08:56 PM »
 :wave:  Hi Marcm welcome to the site.

Really sorry to hear about the car.  At least no one got hurt.  I hope you can build it up again.

Did that car have a fiberglass hood?  :clueless:
1972 Dodge Challenger Rallye 340, AT, Code TB3=Super Blue, SBD=8/17/1971.  Yes, a Rallye without the fender louvers from the factory because of the body side molding option.

Pic #2 and 3 of my ARII 1/24 scale model car 

Phil in New England-Massachusetts  Always thank God for what you have!

http://www.cardomain.com/ride/456046/1972-dodge-challenger

Offline marc7071

  • 1971 Dodge Challenger Convertible JH27G1B100192
  • Jr. Member
  • **
  • Posts: 24
Re: don't know why I didn't join before.......
« Reply #9 on: September 24, 2012 - 08:50:45 PM »
on a molecular level, that sheetmetal is most probably destroyed.  If you will be able to get things straight again, the parts that went through this heat will keep on biting you with rust and cracks........think twice before dumping loads of money into the car.
Bart
I believe the structure is usable, but haven't really gotten a 100% yes about that.
As for the sheet metal very likely no.
I've heard both of those before as well. I figured the exterior sheet metal is a complete loss. My hopes lie in the main body (frame/body tub/body-in-white). With it having been almost completely assembled I'm hoping that the body structure was somewhat insulated from the worst of the heat.
I'm hoping this because of other things I'm finding while digging through the remains of the garage. I also deal in parts and had many of them in my garage when the fire occurred. The stack was so big that I actually found a Dodge Ram headlamp (all plastic) that was in the middle of the pile, still in it's box and completely unscathed. That was a shocker.
From the get-go I've been conferring with high-end restoration shops to find out for sure but I won't be spending any money on the car unless a reputable shop gives me the green light and says it can be saved for sure.

Curious how much the insurance gave you for the loss . . . . . did you have an appraisal?
Here's the thing about that. Something I was unaware of was that even though the car was in my garage it was NOT covered under my home owners policy. Turns out, if you have a car in your garage, it still has to have it's own insurance. Since I was not finished with the car yet (engine & trans still out of the car), I didn't have coverage on it yet. Hence, to answer your initial question.....noting at all. However, everything else inside of the garage and inside the house IS covered so I will be making many sacrifices in order to use that money towards my car.
Did that car have a fiberglass hood?  :clueless:
Good eye just from watching the video. Yes it did. I had a T/A hood on the car when the fire happened. All that was left of it was the fiberglass matting. The dual scooped hood was also in the garage and got pretty wasted but I threw it back on the car just to get it up off the ground.
A big thanks to everyone for all the warm welcomes, well wishes and good advise. It means a lot to me in my time of trouble. I think I will make a posting about this to continue the conversation. I'll put a link to it here as soon as I do.

Offline marc7071

  • 1971 Dodge Challenger Convertible JH27G1B100192
  • Jr. Member
  • **
  • Posts: 24
Re: don't know why I didn't join before.......
« Reply #10 on: September 25, 2012 - 01:19:13 AM »
OK. I started a discussion thread about the car that includes pictures. For anyone that wants to follow my story, here's a link to that thread. http://www.cuda-challenger.com/cc/index.php?topic=87501.0

Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: don't know why I didn't join before.......
« Reply #11 on: September 25, 2012 - 11:25:10 AM »
Great to have you here , sorry about the loss of the car , I lost my 70 Charger R/T the same way , garage fire & no insurance , insurance is available for projects for future reference

Challenger - You`ll wish You Hadn`t

Offline jimynick

  • Resident
  • *****
  • Posts: 4512
Re: don't know why I didn't join before.......
« Reply #12 on: September 26, 2012 - 11:41:49 PM »
Welcome to the site and sorry for your loss! Hopefully you can salvage something out of it.  :sadwavey: