WANTED dash pce

[cudamadd]

HAS ANYONE GOT THE PLASTIC PEACE FOR THE DASH TO SUIT AN 8 TRACK THANK YOU

[cudamadd]

has any one have for sale the lower dash pce that is for an 8 track thank you  

['Cuda Hunter]

Do you have a pic of what you need?

I thought the standard was the same as the 8 track set up?

[YYZ]

http://www.ebay.com/itm/1970-Cuda-Challenger-Dash-Trim-Bezel-for-8-Track-Tape-Player-/321003553539?pt=Motors_Car_Truck_Parts_Accessories&hash=item4abd4d8303&vxp=mtr

[72cudamaan]

Do you have a pic of what you need?

I thought the standard was the same as the 8 track set up?

Shaped a little different to fit the 8 track portion into the dash. Pricey little bugger too.

['Cuda Hunter]

Thanks for jogging my memory.

Quite pricey.  Have yet to own one of those.

[tuff340GranCoupe]

for a Cuda or Challenger? 1970 Challenger is WAY different then a 70-74 Cuda. 70 Challenger does not have the smaller indent running along the edge of it, as 70 Cuda does not have this indent. You will pay more for a 70 Challenger then ther Cuda I know.

[TheOriginalQuickBpBp]

for a Cuda or Challenger? 1970 Challenger is WAY different then a 70-74 Cuda. 70 Challenger does not have the smaller indent running along the edge of it, as 70 Cuda does not have this indent. You will pay more for a 70 Challenger then ther Cuda I know.

Which one is this Cuda or Challenger? I think it is Cuda...
Thanks!

[MEK-Dangerfield]

That looks like a 70 E-Body bezel from here. 71-74 are different with the groove around the edge. Cuda and Challenger are both the same.

[TheOriginalQuickBpBp]

That looks like a 70 E-Body bezel from here. 71-74 are different with the groove around the edge. Cuda and Challenger are both the same.

It's mine. I thought 70 Challenger was different than 70 Cuda since the dash pad had the stitch in it that lines up with the lower bezels...I am confused anybody have a pic of the other one they made? To The OP Sorry for asking on your thread but i think you need to make sure you get the right one since they are $$$$.

[MEK-Dangerfield]

Hey,

  It's easy to get lost here. We have 70 only parts, and parts only specific to one or the other E-body.

This picture is of the standard right side lower dash pieces. You can see the 70 top picture has no groove around the edge. The second picture is the 71-74 bezel. Notice also some difference in the shape of the right screw cut out on the bottom. I was told the 71-74 bezel will not fit a 70, but I never tried it myself.