Author Topic: Nice E-body parts  (Read 6754 times)

Offline TheOriginalQuickBpBp

  • Jr. Member
  • **
  • Posts: 54
Nice E-body parts
« on: October 20, 2012 - 12:21:31 PM »
Newer member with some parts I would like to sell. Moparts member for 15+years. Have all B-bodies now...

70 Challenger SE Complete rear window Plug,glass,outside mouldings and with inner interior bezel $350

NOS 70 Challenger SE Center rear window trim moulding with clips $85

70 Cuda front parklamps very nice original assemblies clear no chips or crazing,housings clean,wiring perfect $295 pr. *SOLD*
Also have original lenses and housings E-mail for $$$

70-4 Wiper and dimmer switch knobs $15ea.

70-1 Challenger original LH rear Marker assembly nice lense,shiny with a few pits starting,has perfect retainer and nuts $50

70 Cuda Original Front valence nice condition bare metal outside and epoxy primed inside nothing hidden $150

70 Cuda Taillights nice lenses,nice chrome bezels and nice straight outter bezels $150pr

71 Cuda Painted fender turn signal housings with studs and nice pins $45pr

Nos 73-4 Chrome fender top turn signal $75pr

Nos 73 Cuda gas cap Part #378670 $45

71-4 E-body original painted passenger side mirror $100

New in box discontinued reproduction E-body Muffler Date coded 9-69 has Pentastar and part # Has Small dent $175

Complete Headlamp,dimmer and wiper switches $35ea

Original Challenger flip top gas caps,chrome and painted gas caps good condition $40-90ea

70 Challenger hoodlip mouldings nice originals $65ea

70 Challenger NOS hoodlip moulding with light shelfware $95

Nos A/C Delco 440 idle solenoid part #DR1114421 in factory box light oxidation on housing $140ea.

70-4 Challenger rear window trim $125

E-body front windshield mouldings LH and RH uppers $85pr

70-4 Challenger rear Vinyl top mouldings one ding $100pr

72-4 Challenger reproduction headlamp rings (which I believe are now discontinued from BEA Parts) $160 set of 4

70-4 Challenger woodgrain door panel inserts nice chrome with panel nuts to install $70pr

Nos 70-2 Challenger chrome fender Turn signal P# 2930781 In original wrapper $90

Reproduction BEA 70-4 E-body door lock levers w/bolts NIB $25pr

72-4 Challenger Rallye fender louvers, No broken studs and Most nuts to install one plastic insert missing a piece. $125pr

72-4 LH Rallye Louver no broken pins and plastic insert is cracked but what you see is still there. $55

NOS RH E-body Door Handle in original packaging P# 3760214 $90

NEW 73-4 E-body Year One Splash shields with rivets Part # G87 List $82set now $50set

NEW 70-4 E-body Year One Challenger Decklid and Qtr. Panel hardware Part # JM96 List $57 now $40 set

71-4 Original Challenger Qtr tip trim couple dings still presentable $75pr

70-4 Challenger original hood scoops $90pr

Nice 72-4 Black Original slapstick "T" handle will fit 71 also but not correct appearing. $45

Nice Black 2 spoke wheel with nice center cap and switch,nice graining and ready to bolt on $100

Parts located in SE PA. Can send pics of all parts. All parts plus shipping. Pm here on the board or e-mail bretts440"at"frontiernet.net
Thanks for FREE ad! 

« Last Edit: June 10, 2013 - 06:25:27 PM by TheOriginalQuickBpBp »




Offline 72ls5fla

  • Jr. Member
  • **
  • Posts: 306
Re: Nice E-body parts
« Reply #1 on: October 20, 2012 - 01:19:48 PM »
hi-

what is the price for one of the painted gas caps?
Could you send a couple pics?
my address:    bill.chamberlain@onetechplace.com

thanks-
bill

Offline TheOriginalQuickBpBp

  • Jr. Member
  • **
  • Posts: 54
Re: Nice E-body parts
« Reply #2 on: October 20, 2012 - 08:48:49 PM »
I'll send pics and price of the painted gas cap on Sunday...
Thanks..

Offline Rare_T_A

  • Resident
  • *****
  • Posts: 3916
    • Freiss Family Mopar Site
Re: Nice E-body parts
« Reply #3 on: October 21, 2012 - 09:24:00 AM »
Sent a PM for the 70 Challenger NOS hoodlip moulding with light shelfware $95
'09 Challenger R/T  5.7 HEMI Auto
'70Challenger T/A 340 727

Fargo, N. Dak.
My web Site:  http://freiss.co.nr

My Flikr Page: http://www.flickr.com/photos/102813164@N04/

I was born with nothing and I still have most of it left!

Offline TheOriginalQuickBpBp

  • Jr. Member
  • **
  • Posts: 54
Re: Nice E-body parts
« Reply #4 on: October 21, 2012 - 10:36:23 AM »
Sent a PM for the 70 Challenger NOS hoodlip moulding with light shelfware $95


Responded and pics sent. Thanks....


hi-

what is the price for one of the painted gas caps?
Could you send a couple pics?
my address:    bill.chamberlain@onetechplace.com

thanks-
bill


Hi Bill, Pics and prices sent...Thanks..

Offline cuderman_74

  • Jr. Member
  • **
  • Posts: 9
Re: Nice E-body parts
« Reply #5 on: November 13, 2012 - 04:37:30 PM »
hi just wondering if u know of some A PILLAR mouldings in white? tks

Offline TheOriginalQuickBpBp

  • Jr. Member
  • **
  • Posts: 54
Re: Nice E-body parts
« Reply #6 on: December 28, 2012 - 11:53:35 PM »
 :woohoo: Bump

 List was updated..... :2thumbs:

Offline jthomp

  • Jr. Member
  • **
  • Posts: 8
Re: Nice E-body parts
« Reply #7 on: April 02, 2013 - 07:28:57 PM »
i'm interested in the right side mirror do you still have it?

Offline John A

  • Jr. Member
  • **
  • Posts: 183
Re: Nice E-body parts
« Reply #8 on: April 03, 2013 - 09:03:25 PM »
I could use the 73 Cuda gas cap if you still have it, thanks John.

Offline TheOriginalQuickBpBp

  • Jr. Member
  • **
  • Posts: 54
Re: Nice E-body parts
« Reply #9 on: April 08, 2013 - 09:32:25 PM »
i'm interested in the right side mirror do you still have it?

Hi I do still have the mirror send me a PM with your e-mail and I can send pics during the week.
 
Thanks, Brett

Offline TheOriginalQuickBpBp

  • Jr. Member
  • **
  • Posts: 54
Re: Nice E-body parts
« Reply #10 on: April 08, 2013 - 09:37:38 PM »
I could use the 73 Cuda gas cap if you still have it, thanks John.

Pm sent.

Thanks, Brett

Offline John A

  • Jr. Member
  • **
  • Posts: 183
Re: Nice E-body parts
« Reply #11 on: April 15, 2013 - 08:33:11 PM »
Hi Brett, gas cap came today. Very nice, thanks John.

Offline Katfish

  • Resident
  • *****
  • Posts: 3733
  • 70 Challenger
Re: Nice E-body parts
« Reply #12 on: April 19, 2013 - 09:50:34 PM »
Hi,

I need tinted quarter glass for a Challenger

Offline getslideways

  • Jr. Member
  • **
  • Posts: 143
Re: Nice E-body parts
« Reply #13 on: April 23, 2013 - 02:01:50 PM »
My parts showed up yesterday! Super fast shipping, thanks again!  :thumbsup:

Offline TheOriginalQuickBpBp

  • Jr. Member
  • **
  • Posts: 54
Re: Nice E-body parts
« Reply #14 on: June 10, 2013 - 06:30:50 PM »
 :woo: List has been updated with more parts!

 :bigsmile: Thanks to all who recieved the parts they bought and posted!