Yearone 17inch Rallye

[mildphil]

any clearance issues with these? do you need to do any changes or can you put these on and go?

[72bluNblu]

any clearance issues with these? do you need to do any changes or can you put these on and go?

The 17x8's should bolt right on and go, shouldn't have any clearance issues front or rear. The 17x9's will be tight depending on your tire choice with stock components, front and rear. I run 17x9's with 275/40/17's all the way around, but I had a mild rub on my right front fender until I re-adjusted the alignment (more negative camber). I have a B body rear with 1" relocated springs, so I'm way clear in the back. On a stock car it would be tight, probably come down to body tolerances front and rear with the 17x9's and something as wide as a 275.

[7212Mopar]

Just noticed that Yearone now has the Rallye wheels in staggered configuration in a front and back package, 17x8 front and 17x9 back. This will save a few bucks compare to buying different sizes separately. Thinking to place my order next month. I have the stock 14" Magnum on the car now.

[shoooter]

cant wait to see a set on a 71 cuda

[challenger_affair]

I'm going to need some new tires and since I currently have original 14" rallye's I'm seriously considering this alternative...  Since most of the discussion here is from the beginning of the year, can anyone share further experiences with these wheels in the intervening months?  Backspacing, tire combos, fittment issues?? 

 

[hemiken]

Have any other guys bought these wheels and fitted them, would love to see some more if possible please guys

[drewcrane]

I was so close to buying them but I just cant make the change,I love cool custom wheels but until I see them in person I just cant bite the bullet

 

someone else have em yet?

[Bullitt-]

I was so close to buying them but I just cant make the change,I love cool custom wheels but until I see them in person I just cant bite the bullet

 

someone else have em yet?

found  http://www.dodgecharger.com/forum/index.php?PHPSESSID=bkafv11iaoiblfp7obu5rp1c47&topic=97177.msg1142169#msg1142169




http://www.drivinithome.com/yearone-mopar-rallye-wheels/

[brads70]

FYI...They do present some fitment issues with larger brakes.
http://www.protouringmopar.com/showthread.php?1307-13-disk-brakes-does-not-fit-a-17-rim

[anlauto]

FYI...They do present some fitment issues with larger brakes.
http://www.protouringmopar.com/showthread.php?1307-13-disk-brakes-does-not-fit-a-17-rim

What about the 12.90 rotor/caliper from Welwood ? http://www.alangallantautomotiverestoration.com/  Will I have issues ?

[brads70]

What about the 12.90 rotor/caliper from Welwood ? http://www.alangallantautomotiverestoration.com/  Will I have issues ?

Hummmm  IDK? 

[anlauto]

Hummmm  IDK? 

The calipers are way smaller then what your using...

I'm thinking of the YearOne 17" Magnums, but also wondering about 9"width up front ?

[brads70]

The calipers are way smaller then what your using...

I'm thinking of the YearOne 17" Magnums, but also wondering about 9"width up front ?

Hard to say? The rotors your using are almost an 1" bigger than mine? It should fit but that's only a guess? I doubt a 9" rim will fit even with custom backspacing if everything is stock ( fenders etc...) but I don't know for sure.

[anlauto]

Well how wide are the rims in the above pictures ?

[brads70]

Well how wide are the rims in the above pictures ?

Not sure on the Cuda? the Challenger has 8" front and 9" back.