Looking for a nice little A-body to cruise the street..

[TROUBLE987]

I like about all the darts,dusters,valiant,scamp,swinger..not looking to spend a ton..

['Cuda Hunter]

Are you looking for a project?  Or a finished car ready to go?

I got a close to rust free Colorado project car.  Needs valve job to run.

[TROUBLE987]

Finished..I have my cuda project..thx

[moparman82]

How bout a 9 second, street legal smallblock 72 duster?  Caged, tubbed, seats 2

[TROUBLE987]

Good lord..can I see some pics? And what kind of money we talking?

[moparman82]

How bout a 9 second, street legal smallblock 72 duster?  Caged, tubbed, seats 2

here's a couple pics, lemme know if u want more info on the 750hp naturally aspirated monster under the hood

[moparman82]

starting from the top and working our way down

1071 Pro Systems Dominator
Indy 360-3 ported intake
W-5 Heads ported by Shady Dell
Ferrera valves 2.08/1.8
Harland sharp 1.5 roller rockers
Isky tool room springs and retainers
Bullet solid roller cam 712 lift@310
419 stroker
3/4 block fill
Forged Crank,
H beam rods
Hughes bottom end girdle
ARP bolts throughout
Studded bottom end and heads
Built for the bottle but has never been hooked up, makes enough power like it is
electric water pump
TRANS
727 built by PRO-Trans
trans brake,
4inch aluminum driveshaft,
5500 stall
forged axles, spool
TTI 1 7/8 headers, full 3 inch exhaust w/ xpipe
trans cooler
full aero motive fuel system, xrp a-n fittings
All autometer gauges, BnM Pro shifter, line loc,
fiberglass:trunklid, bumper, and hood (custom 6 inch 6packhood)
Caltracs, 8 way shocks
4 pt harnesses
around 2800lbs
runs 9.80's easy, with full exhaust and E.T streets
got a lot into it, would consider giving her a new home for around 15k.

['Cuda Hunter]

That is one sweet ride!

[moparman82]

It currently has Ross 14:1 pistons so 110 octane is needed, but i will also include a set of Wiseco pistons that bring the compression down to 11.1 to 1 and allow for pump gas, at 11.1 it ran 10.36 @ 130 with full exhaust and street tires, no dialing in, straight off the trailer at Famosa in Bakersfield.  I will also throw in a new edlebrock RPM nitrous kit, 200 shot which has never been used, but i think it would be enough to get her back into the 9's on pump gas.  Have reciepts for nearly 25k not including the original price of the car.

You can see her run on youtube, type in "340stroke" and the title will be "1972 340 Duster Drag Race"

[jimynick]

That's a nice, but nasty Duster! I had a 72 340 Duster and if I had the coin, you and I'd be talking about my new one.