Author Topic: Maybe bolt hole Question  (Read 1649 times)

Offline daveh

  • Full Member
  • ***
  • Posts: 813
Maybe bolt hole Question
« on: December 20, 2012 - 03:02:16 PM »
Hey guys,

In the picture labeled Pass #1 & #2 I've circled in red a hole that I don't know what attaches there.  It has definatley been cut.  Or do I just weld in a new piece of steel figuring someone cut it to route through something?  I have a similar hole on the other side, labeled Drivers #1 & #2 but with a nut with the bolt still in there.  So am I missing something?  Do I weld in a new piece of metal with a bolt or just a patch?  Is it missing something?  Or are both sides suppose to be different?  Since the car was partially taken apart when I got it I don't know what attaches to it if anything.  I'm guessing the fender????  Can you guys help me out?  Thanks

Dave




Offline dutch

  • Sr. Resident
  • ******
  • Posts: 6944
Re: Maybe bolt hole Question
« Reply #1 on: December 20, 2012 - 03:38:26 PM »
here`s what it looked like on my 70 cuda



*** Bart ***

Offline CUDA JAS

  • Resident
  • *****
  • Posts: 2292
  • vroooooom!
Re: Maybe bolt hole Question
« Reply #2 on: December 20, 2012 - 04:18:46 PM »
Those bolts help to hold in the inner fendser splash sheilds.

But it looks like you are missing the threaded inserts.

Jason
74 'cuda 360/727



Gearhead: car nut, automotive enthusiast, one who loves hot rods, muscle cars, hot trucks, burnin' rubber and neck snapping performance. 

Just call me a gearhead!

Offline daveh

  • Full Member
  • ***
  • Posts: 813
Re: Maybe bolt hole Question
« Reply #3 on: December 20, 2012 - 04:32:43 PM »
Does anyone have a picture that I could see?  What size would it be?  Thanks

Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: Maybe bolt hole Question
« Reply #4 on: December 20, 2012 - 07:38:48 PM »
there should be a square anchor pinched into that hole 5/16 as I recall , Can't you see the pix Dutch posted ?

Challenger - You`ll wish You Hadn`t

Offline daveh

  • Full Member
  • ***
  • Posts: 813
Re: Maybe bolt hole Question
« Reply #5 on: December 20, 2012 - 10:10:42 PM »
Thanks does anyone have a picture of the splash shield attached that I could look at? 

Why does Dutch's picture have that hole in it and mine doesn't?

And where can I get that anchor?  Thanks

dave

Offline jimynick

  • Resident
  • *****
  • Posts: 4512
Re: Maybe bolt hole Question
« Reply #6 on: December 20, 2012 - 10:16:37 PM »
You'd have to salvage one out of another car or just buy a washer-integral 5/16" nut and mig it in, fill in the holes and grind the welds.  :2cents:

Offline CUDA JAS

  • Resident
  • *****
  • Posts: 2292
  • vroooooom!
Re: Maybe bolt hole Question
« Reply #7 on: December 21, 2012 - 10:40:41 PM »
Does anyone have a picture that I could see?  What size would it be?  Thanks

Sorry man, the splash sheilds are out of mine while I rebuild the front suspension.

Jason
74 'cuda 360/727



Gearhead: car nut, automotive enthusiast, one who loves hot rods, muscle cars, hot trucks, burnin' rubber and neck snapping performance. 

Just call me a gearhead!

Offline daveh

  • Full Member
  • ***
  • Posts: 813
Re: Maybe bolt hole Question
« Reply #8 on: December 21, 2012 - 10:45:14 PM »
Thanks anyway I appreciate it.

Dave

Offline 7071 challenger

  • Jr. Member
  • **
  • Posts: 215
  • All you need is Dodge!
Re: Maybe bolt hole Question
« Reply #9 on: December 26, 2012 - 04:20:05 PM »
These are the splash guards you need. I would have like to show you when they are installed, but this is the only pic I have, (car is at the body shop at the moment). They fill the space between the end of the cowl dash and the fender. The bottom hole of the guard align with the hole you are talking about. The lower hole use a 5/16" bolt while all the others holes use metal screws and flat washers. Splash guards part numbers are 2895554 & 2895555.

Robert

Offline daveh

  • Full Member
  • ***
  • Posts: 813
Re: Maybe bolt hole Question
« Reply #10 on: December 28, 2012 - 10:35:29 AM »
That's perfect Robert thanks.  I just neet to get my guards out of storage so I can weld in a new bold in the right location.  Happy New Year all.

Dave

Offline elmoska

  • Jr. Member
  • **
  • Posts: 155
Re: Maybe bolt hole Question
« Reply #11 on: December 29, 2012 - 11:57:20 AM »
this is a picture of my 74 challenger's right splash shield installed...but not yet fixed, hope it can help

1974 challenger on its way..

Offline elmoska

  • Jr. Member
  • **
  • Posts: 155
Re: Maybe bolt hole Question
« Reply #12 on: December 30, 2012 - 11:13:03 AM »
i just have to find the right bolt that can get those splash shield fixed
1974 challenger on its way..