70 Trunk Molding Set on eBay - Correct????

News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1] 2

    Author Topic: 70 Trunk Molding Set on eBay - Correct????  (Read 3715 times)

    Offline Carlwalski

    • C-C.com Expert
    • ********
    • Posts: 20672
    70 Trunk Molding Set on eBay - Correct????
    « on: March 07, 2005 - 02:20:32 AM »
    I know that I may be hitting myself in the foot inviting many people who are looking for this set to make the bids climb, climb, CLIMB but, hey, I have no choice I want to know if this molding set is correct? I know the trunk moldings should be rounded, but how "round" I'm not sure. So molding gurus get those hawk eyes at and help your kiwi mate....Plezzzzzzzzzzz  ;D The side pieces need work but I have seen them seperate, it's going to cost me by the looks of things $1,000 to get my complete set but sh!t, these things are hard to get.


    So, does the trunik piece look like the rounded 70 style to you guys? I think it does but need a few helpers.

    http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=4533770059&category=34204&sspagename=WDVW


    As always.
    Thanks,
    Carl  :thumbs:
    Logged
    1970 Dodge Challenger R/T
    White, License Plate, 0A-5599
    540ci Aluminium Hemi, F.A.S.T EFI
    TF-727 Gear Vendor OD, Dana 60


    Offline MEK-Dangerfield

    • C-C.com Expert
    • ********
    • Posts: 20946
    • I don't get NO respect! Member since 1/25/2002
    Re: 70 Trunk Molding Set on eBay - Correct????
    « Reply #1 on: March 07, 2005 - 03:10:12 AM »
    NZ,
      I thought you knew everything about these parts by now. :laughing: Those quarter pieces look correct if you ignore the dents. :ack:  I would like a close-up of the trunk trim though. That's a tough one to make out.

      Mike
    Logged

    Mike

    1970 Challenger - SOLD
    2016 SXT+.  1 of 524 SXT+'s in Plumb-crazy for 2016.

    Offline Carlwalski

    • C-C.com Expert
    • ********
    • Posts: 20672
    Re: 70 Trunk Molding Set on eBay - Correct????
    « Reply #2 on: March 07, 2005 - 12:13:29 PM »
    Quote from: MEKrunner on March 07, 2005 - 03:10:12 AM
    NZ,
      I thought you knew everything about these parts by now. :laughing: Those quarter pieces look correct if you ignore the dents. :ack:  I would like a close-up of the trunk trim though. That's a tough one to make out.

      Mike
    :laughup: Thats true but after having seen so many of these darn things you lose your mind.  :ack: :laughing:

    Thanks  ;)
    Logged
    1970 Dodge Challenger R/T
    White, License Plate, 0A-5599
    540ci Aluminium Hemi, F.A.S.T EFI
    TF-727 Gear Vendor OD, Dana 60

    Offline 67Vette427

    • Full Member
    • ***
    • Posts: 586
    • My other car is not a Rambler
    Re: 70 Trunk Molding Set on eBay - Correct????
    « Reply #3 on: March 07, 2005 - 02:11:30 PM »
    Hey NZ!!


    Yes they are the right ones and they are getting hard to find. I got some on back order at year one for the second time. The guy may be right about not making them anymore.

    The left one is pretty banged up but I saw a left one on ebay also today. Its pretty hard to get them straight again. I used my originals, popped out a couple dings and then sanded and polished them out. Probably they're more shiny now than original.

    Good Luck!
    Logged
    1 of 1 Mr Norm's T/A/ 2015 Hellcat, sublime/ 13 Power Wagon

    Offline Carlwalski

    • C-C.com Expert
    • ********
    • Posts: 20672
    Re: 70 Trunk Molding Set on eBay - Correct????
    « Reply #4 on: March 07, 2005 - 11:06:51 PM »
    Hey 67Vette!!


    Good to see you again mate.  ;) :thumbs:


    Thanks, I have hopefully got April (Moderator from this board) ordering me some moldings from Jacks, he has a set.

    I have seen plenty of L/H & R/H moldings but no trunks, thats the hard part.  :gripe: :laughing:


    See ya Bud.  :)
    Logged
    1970 Dodge Challenger R/T
    White, License Plate, 0A-5599
    540ci Aluminium Hemi, F.A.S.T EFI
    TF-727 Gear Vendor OD, Dana 60

    Offline Killer_Mopar

    • Sr. Member
    • ****
    • Posts: 1886
    Re: 70 Trunk Molding Set on eBay - Correct????
    « Reply #5 on: March 08, 2005 - 12:25:41 AM »
    Does anyone have a side-by-side comparison between the 70 style and the 71-74 style? Whats the difference between them?? I have the left and right outside trim that have been sitting in the my dad's garage for 25+ years and I dont know what year they are.
    Logged
    70 Challenger R/T SE - The never-ending project........

    Offline 67Vette427

    • Full Member
    • ***
    • Posts: 586
    • My other car is not a Rambler
    Re: 70 Trunk Molding Set on eBay - Correct????
    « Reply #6 on: March 08, 2005 - 12:17:20 PM »
    Maybe clean them up and post a photo here. I have a pretty good idea what the 70 looks like. Unless they put a ridge in the 71, then I would assume they are the same.

    NZ, is Jacks on line? I could use a set myself.

    Good to hear from yah!
    Logged
    1 of 1 Mr Norm's T/A/ 2015 Hellcat, sublime/ 13 Power Wagon

    Offline Carlwalski

    • C-C.com Expert
    • ********
    • Posts: 20672
    Re: 70 Trunk Molding Set on eBay - Correct????
    « Reply #7 on: March 08, 2005 - 12:27:28 PM »
    Quote from: 67Vette427 on March 08, 2005 - 12:17:20 PM

    NZ, is Jacks on line? I could use a set myself.

    Good to hear from yah!
    Yip, but good luck getting them.  :ack: I have emailed since August last year long LONG story I had to get April our Moderator to call and order them, ship them to her then she'll ship them to me. They don't respond to emails.  :gripe:

    Like wise mate, you should stick around more.  ;)
    Logged
    1970 Dodge Challenger R/T
    White, License Plate, 0A-5599
    540ci Aluminium Hemi, F.A.S.T EFI
    TF-727 Gear Vendor OD, Dana 60

    Offline Street_Challenged73

    • Sr. Resident
    • ******
    • Posts: 8826
    • '73 FC-7 Challenger..Member since October 20, 2002
      • My '73 Challenger Restoration Page
    Re: 70 Trunk Molding Set on eBay - Correct????
    « Reply #8 on: March 08, 2005 - 12:58:15 PM »
    Quote from: Killer_Mopar on March 08, 2005 - 12:25:41 AM
    Does anyone have a side-by-side comparison between the 70 style and the 71-74 style? Whats the difference between them?? I have the left and right outside trim that have been sitting in the my dad's garage for 25+ years and I dont know what year they are.

    Killer, the '70 extensions were completely smooth.  The '71-'74's on the other hand, have a ridge or raised portion that runs towards the top leading edge.  it's kind of like the lower L-shaped plastic dash pieces, too. :thumbs:
    Logged
    1973 Dodge Challenger......................The ongoing project. (00/----\00)
    1991 Dodge Stealth R/T Twin-Turbo....The sunny day cruiser (RTBoost)
    1990 Toyota Celica GT Liftback...........The new daily & winter driver.
    All-American Muscle: 'Cudas and Challengers...Still the Elite and always will be.

                                                                                                 
                     
    Street_Challenged73 from Wisconsin

    Offline 67Vette427

    • Full Member
    • ***
    • Posts: 586
    • My other car is not a Rambler
    Re: 70 Trunk Molding Set on eBay - Correct????
    « Reply #9 on: March 14, 2005 - 04:24:44 PM »
    Congrats on winning the auction NZ!  I saw you bidding on it and then win it. I guess the Jacks didn't work out?
    Logged
    1 of 1 Mr Norm's T/A/ 2015 Hellcat, sublime/ 13 Power Wagon

    Offline MoparMatt383

    • Jr. Member
    • **
    • Posts: 388
    • Member as of March 2004
    Re: 70 Trunk Molding Set on eBay - Correct????
    « Reply #10 on: March 14, 2005 - 06:07:13 PM »
    I got a set for my 71 challenger about a year ago for 25 dollars, guess I got a deal then.  One of the side pieces has a ding in it but they are otherwise nice.  They were off a 70 challenger that a guy parted out.  It looks like they will fit on my 71, but is there a difference?

    Matt
    Logged
    Too many projects and nothing gets done.

    Offline 67Vette427

    • Full Member
    • ***
    • Posts: 586
    • My other car is not a Rambler
    Re: 70 Trunk Molding Set on eBay - Correct????
    « Reply #11 on: March 14, 2005 - 09:44:34 PM »
    Yes,

    There is a difference. The 71 has a ridge where the 70 just crowns in the middle.
    Logged
    1 of 1 Mr Norm's T/A/ 2015 Hellcat, sublime/ 13 Power Wagon

    Offline MEK-Dangerfield

    • C-C.com Expert
    • ********
    • Posts: 20946
    • I don't get NO respect! Member since 1/25/2002
    Re: 70 Trunk Molding Set on eBay - Correct????
    « Reply #12 on: March 15, 2005 - 01:50:58 AM »
    Quote
    I got a set for my 71 challenger about a year ago for 25 dollars, guess I got a deal then.  One of the side pieces has a ding in it but they are otherwise nice.  They were off a 70 challenger that a guy parted out.  It looks like they will fit on my 71, but is there a difference?

    Matt


    Matt,
       Looks like you should sell your 70 moldings, then turn around and buy a 71-74 set. You'll make a $400 profit. :laughing: Gosh NZ, you really wanted those BAAAAAD.  :o :o :o

      Mike
    Logged

    Mike

    1970 Challenger - SOLD
    2016 SXT+.  1 of 524 SXT+'s in Plumb-crazy for 2016.

    Offline Carlwalski

    • C-C.com Expert
    • ********
    • Posts: 20672
    Re: 70 Trunk Molding Set on eBay - Correct????
    « Reply #13 on: March 15, 2005 - 01:57:18 AM »
    Quote from: 67Vette427 on March 14, 2005 - 04:24:44 PM
    Congrats on winning the auction NZ!  I saw you bidding on it and then win it. I guess the Jacks didn't work out?
    Thanks mate, cost me a bit eh...... :( Oh well it'll grow back.  :laughing: ;D :guitar:

    What has to be done, has to be MoPar....... 8)
    Logged
    1970 Dodge Challenger R/T
    White, License Plate, 0A-5599
    540ci Aluminium Hemi, F.A.S.T EFI
    TF-727 Gear Vendor OD, Dana 60

    Offline MoparMatt383

    • Jr. Member
    • **
    • Posts: 388
    • Member as of March 2004
    Re: 70 Trunk Molding Set on eBay - Correct????
    « Reply #14 on: March 15, 2005 - 09:51:21 AM »
    Haha I should.  Does anybody repro the 71-74 trim because I saw NZ said they stopped making the 70 ones.

    Matt
    Logged
    Too many projects and nothing gets done.
    Pages: [1] 2
    « previous next »