Author Topic: cuda hood yes or no  (Read 11433 times)

Offline EB3-GranCoupe

  • Sr. Member
  • ****
  • Posts: 1435
  • BP23 U0B
Re: cuda hood yes or no
« Reply #15 on: January 12, 2013 - 04:31:58 PM »
I think hood pins (J45) were optional until some point in late '69, or early '70 when they were made standard. Which ever TSB it was in, it think it also had the performance hood (J54) optional on GC's and base models.




Offline shadango

  • Resident
  • *****
  • Posts: 3920
Re: cuda hood yes or no
« Reply #16 on: January 25, 2013 - 11:45:28 AM »
Found this for 1971 in a Barracuda brochure.  Hood pins were "standard" on the Cudas!  I didn't know that!    :thumbsup: 

Man, the Challengers got short changed!!!!   
Well that is because the fish cars are the sportier of the two.    :bigsmile: :cooldancing: :woohoo:

 :popcorn:

Offline 'Cuda Hunter

  • Sr. Resident
  • ******
  • Posts: 9102
  • Tastes Like Chicken
Re: cuda hood yes or no
« Reply #17 on: January 25, 2013 - 01:00:24 PM »
Well that is because the fish cars are the sportier of the two.    :bigsmile: :cooldancing: :woohoo:

 :popcorn:

 :cheers: :cheers: :cheers: :cheers: :cheers:
"All riches begin as a state of mind and you have complete control of your mind"  -- B. Lee

Offline 71hcc

  • Jr. Member
  • **
  • Posts: 83
Re: cuda hood yes or no
« Reply #18 on: January 25, 2013 - 02:18:13 PM »
My cuda came from the factory with out the hood pin option.   I do like the hood pins . So i am at the 50/50 stage , do i put them in or do i leave it plan ?  Do most of as think they like better with or with out pins , cheers. :dunno:
If you like them then put them on. I'm doing a repaint on my 71 Hemicuda vert (clone) and am putting on a new shaker hood because the hood that was on the car has some filler in it. My replacement hood doesn't have pin holes and I'm not putting them back on because I think they are a PIA and the cables rub and scuff the paint. I don't really like the looks of them anyway but thats just me,everybody has their own taste. I don't care about it being correct,thats why I sold my real Hemicuda so I could build one the way I liked it.
Jim     

Offline Super Blue 72

  • Permanent Resident
  • *******
  • Posts: 12711
  • "Big 'n Little" Member since 8/9/05
    • Phil's Super Blue '72
Re: cuda hood yes or no
« Reply #19 on: January 26, 2013 - 11:38:04 AM »
Well that is because the fish cars are the sportier of the two.    :bigsmile: :cooldancing: :woohoo:



 :worshippy  :worshippy  :worshippy  :worshippy  :worshippy
1972 Dodge Challenger Rallye 340, AT, Code TB3=Super Blue, SBD=8/17/1971.  Yes, a Rallye without the fender louvers from the factory because of the body side molding option.

Pic #2 and 3 of my ARII 1/24 scale model car 

Phil in New England-Massachusetts  Always thank God for what you have!

http://www.cardomain.com/ride/456046/1972-dodge-challenger

Offline mopar jack

  • Full Member
  • ***
  • Posts: 566
Re: cuda hood yes or no
« Reply #20 on: January 26, 2013 - 12:21:14 PM »
If you add the hood pins then I would remove the head gouging safety latch. The hood will close and open easier and quieter.

Offline 71hcc

  • Jr. Member
  • **
  • Posts: 83
Re: cuda hood yes or no
« Reply #21 on: January 27, 2013 - 03:18:32 PM »
If you add the hood pins then I would remove the head gouging safety latch. The hood will close and open easier and quieter.
HAHA I second that! I don't know how many times I hit my head before I took mine off,although I will put one back on my new hood that I'm not putting the pins back on. Maybe hang a big red flag on it when the hood is up.

Offline MEK-Dangerfield

  • C-C.com Expert
  • ********
  • Posts: 20946
  • I don't get NO respect! Member since 1/25/2002
Re: cuda hood yes or no
« Reply #22 on: January 27, 2013 - 03:27:14 PM »
HAHA I second that! I don't know how many times I hit my head before I took mine off,although I will put one back on my new hood that I'm not putting the pins back on. Maybe hang a big red flag on it when the hood is up.

I swear I have identations in my skull from that hood latch.   :stomp:

Mike

1970 Challenger - SOLD
2016 SXT+.  1 of 524 SXT+'s in Plumb-crazy for 2016.

Offline vinb

  • Resident
  • *****
  • Posts: 2163
Re: cuda hood yes or no
« Reply #23 on: January 27, 2013 - 03:42:55 PM »
Your car your choice..

Either way it will still look fine..

Offline HP_Cuda

  • Hit the skinny little pedal on the right!
  • Sr. Resident
  • ******
  • Posts: 5268
  • Mopar or No Car!
Re: cuda hood yes or no
« Reply #24 on: January 27, 2013 - 08:58:39 PM »

Heck yah!!!

1970 Cuda Clone 440 4 speed - sublime green
1970 Cuda 383 4 speed - yellow - SOLD

Offline Moparparts

  • Jr. Member
  • **
  • Posts: 227
Re: cuda hood yes or no
« Reply #25 on: February 24, 2013 - 11:29:17 PM »
One good point about having them on the car is if you ever have to leave the car unattended you can put some locks on them. I have done this myself quite a few times i carry a small set in my console just a bit of theft deterrent but may help save some big bucks!

Offline rhamson

  • Jr. Member
  • **
  • Posts: 404
Re: cuda hood yes or no
« Reply #26 on: February 25, 2013 - 11:23:23 AM »
The only draw back is that the coated wires rub against the paint and can cause discoloration over time.

Offline Super Blue 72

  • Permanent Resident
  • *******
  • Posts: 12711
  • "Big 'n Little" Member since 8/9/05
    • Phil's Super Blue '72
Re: cuda hood yes or no
« Reply #27 on: February 26, 2013 - 08:59:21 AM »
One good point about having them on the car is if you ever have to leave the car unattended you can put some locks on them. I have done this myself quite a few times i carry a small set in my console just a bit of theft deterrent but may help save some big bucks!

That's a good point.  I thought about that myself as I have seen small brass locks but the scuff plates must take a beating if you drive around with them.  I guess take them off when driving.  :dunno:
1972 Dodge Challenger Rallye 340, AT, Code TB3=Super Blue, SBD=8/17/1971.  Yes, a Rallye without the fender louvers from the factory because of the body side molding option.

Pic #2 and 3 of my ARII 1/24 scale model car 

Phil in New England-Massachusetts  Always thank God for what you have!

http://www.cardomain.com/ride/456046/1972-dodge-challenger