Replacing stock ignition.

[Ornamental]

I'm considering to replace my stock ignition system with a Davis Unified Ignition. The only reason for that is to clean up the engine, I do not expect a gain in performance in any way.
Anyone here who has experience with the D.U.I.?  Yay or nay?

[PlumCraZRT]

I'm considering to replace my stock ignition system with a Davis Unified Ignition. The only reason for that is to clean up the engine, I do not expect a gain in performance in any way.
Anyone here who has experience with the D.U.I.?  Yay or nay?

Chryco will tell you how much he hates HEI ignitions.  I don't personally have any experience with them.

[blown motor]

Don't mean to hijack the thead but what is HEI ignition?

[Changin Gears]

Don't mean to hijack the thead but what is HEI ignition?

General Motors electronic ignition system.  HEI- High Energy Ignition.

[tman]

If your not expecting any gain, stick with Mopar ignition conversion to electronic.  Very simple.  Others also like Pertronix.

[blown motor]

Rev-n-nator is another option. Fairly new on the market. www.rev-n-nator.com

[msbaugh]

Rev-n-nator is another option. Fairly new on the market. www.rev-n-nator.com

And it's got a built in rev-limiter, also acts as a tachometer under the hood with the led lights. For just over $125? Not bad at all as a orange/chrome box replacement

[cudabob496]

I installed an MSD 6AL, and MSD distributor, and feel like
I gained considerable power, especially in higher RPMs. Also went with MSD wires,
Now run plugs at .060 gap.

[cudabob496]

I'm considering to replace my stock ignition system with a Davis Unified Ignition. The only reason for that is to clean up the engine, I do not expect a gain in performance in any way.
Anyone here who has experience with the D.U.I.?  Yay or nay?

Mount the ignition devices out of the engine bay, under the dash.

[Ornamental]

Mount the ignition devices out of the engine bay, under the dash.

Now that's a possibillity. 

[sadil340]

I've got a Rev-n-Ator. It feels like more power and the limiter is great to have as a security blanket.

[moper]

The MSD dial-a-just is I think only one or two wires and there's nothing else - and it has a rev limiter. If you are thinking about MSd that would be the one. I runa  alot of 6 series and I've mounted them inside the cabin and under the battery tray. It's pretty easy to hide but there are a lot of wires - so if the goal is cleaning things up it might not be much of a help...

[sadil340]

The MSD dial-a-just is I think only one or two wires and there's nothing else - and it has a rev limiter. If you are thinking about MSd that would be the one. I runa  alot of 6 series and I've mounted them inside the cabin and under the battery tray. It's pretty easy to hide but there are a lot of wires - so if the goal is cleaning things up it might not be much of a help...

Dave! Haven't seen posts from you for awhile - good to see you back!