MSD Pro Billet Distributor

[4x4HEMIrig]

Does anyone have a pic of the pin order on an MSD Pro Billet Distributor in a 383? I have searched everywhere and have found nothing.

[jimynick]

At the risk of being extremely stupid here, what is a "pin order"?

[4x4HEMIrig]

Sorry, work term for cannon plug connections.

I got it figured out, but I was looking for the firing order on the distributor cap. There are no markings on the MSD Pro Billet stating which wires go on which pins.

[jimynick]

Glad you got it figured out. The usual firing order should be 18436572 if I remember correctly and #1 was usually at the front pointing at the carb. 

[Chryco Psycho]

#1 can be anywhere , it depends what position the oil pump drive was installed at & which way the dist /rotor is pointing , Glad you figured it out OK

[nqkjw]

#1 can be anywhere , it depends what position the oil pump drive was installed at & which way the dist /rotor is pointing , Glad you figured it out OK

Dead right.
I generally set up a distributor so that the rotor in No.1 position points towards No.1 spark plug.
Just a qrirk of mine

[72cudamaan]

Dead right.
I generally set up a distributor so that the rotor in No.1 position points towards No.1 spark plug.
Just a qrirk of mine

Old Chevy guy huh ? 

[nqkjw]

Old Chevy guy huh ? 

Definitely not.
I think it came from being an old 6cyl guy.