Author Topic: BB 727 600HP build. (Read 1280 times)

MoparDart · « **on:** February 21, 2013 - 07:42:01 AM »

Hi, (I guess this question is for tactransman) but anyway I'm building a 727 to put behind my BB Mopar. The engine will make around 600 to 650 HP. I'm just after advice in what components and brand of components I will need to do this trans. This car will be used on the street and the strip. I will be using a PTC converter .
I know I will need a bolt in sprag, billet rear servo , Alto red clutches and Kolene steels, HD Intermediate band strut.
Would the 3 pinion planetary be OK as well as Kevlar lined bands.
Should I use a Transgo TF-2 or the SK TF SC and mods outlined in tactransmans thread?
Cheers

tactransman · « **Reply #1 on:** February 24, 2013 - 12:05:43 AM »

MoparDart · « **Reply #2 on:** February 24, 2013 - 07:24:18 AM »

Thanks for the info Terry

dougs bs23 · « **Reply #3 on:** March 02, 2013 - 04:24:18 PM »

What vendor did you use to purchase all your parts? Looking at doing a rebuild myself and would like to know where others get there parts, and who has the best deals on clutches, steels, bands and sprags or does a vendor have complete kits available.

MoparDart · « **Reply #4 on:** March 04, 2013 - 03:53:10 PM »

Hi, I'm still sourcing my parts but Ill let you know when I get it sorted out.

Author Topic: BB 727 600HP build. (Read 1280 times)

MoparDart

BB 727 600HP build.

tactransman

Re: BB 727 600HP build.

MoparDart

Re: BB 727 600HP build.

dougs bs23

Re: BB 727 600HP build.

MoparDart

Re: BB 727 600HP build.