wheel virtulizer

[Madmaxx]

i found a really nice wheel virtulizer on big o's site...it has both 70-74 challanger and cuda..i'm still trying to figure out what wheels i want..this one is a pretty good one , you can also change ride height..i will try a link and see if it works ..good luck
http://tbcwheels.ridestyler.com/?mode=webbot

[Katfish]

Pretty neat, would be good if you could mix sizes from front to back.
But it does give you a pretty good idea.

Thanks!

[Madmaxx]

those are some nice wheels and tires on ur ride!...i also have the lime green color on my cuda..i was thinking about going with the same type of color combo on my wheels but with old school 15's and white letters...the only thing i dont like about the black spokes is you cant really see the spoke from a distance..so i was thinking about going with a grey center?..i dunno..i'm on the fence  what sizes are yours....again it looks bad-a

[Katfish]

Here's my set-up

Rims are American Racing Torq-Thrust
ARE-105MS7865B
ARE-105MS8965B

Dr Diff 1" relocation kit gives me about 1" clearance from tire to leaf spring on each side.

17x8 (4.5" BS) up frt - 17/225/50 (25.9")
18x9 (6" BS) in rear - 18/275/40 (26.7")

I looked at the 285's for the rear but it was almost $100 more per tire. I looked for common sizes to keep the cost down.

Here's a comparison when I had the factory rims.  The larger rims / lower profile sidewall makes all the difference IMO.

[getslideways]

Thanks for sharing the link

I think its safe to say, the Mossy Oak wheels are the way to go lol 

[Ebody73]

Newstalgiawheel.com

Has the same thing but allows staggerd wheels
custom paint ride height and tint

[Mopar Thunder]

That is a really neat link, Thanks for sharing

[Madmaxx]

i think i will like it better but for some reason it won t load..it opens a new window and says enter..then goes blank?..i will keep trying!..but thanks for the new link!

[Ebody73]

From newstalgia
18 front 20 rear lowered 1"