Car insulation

News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: 1 [2]

    Author Topic: Car insulation  (Read 6347 times)

    Offline shoooter

    • Full Member
    • ***
    • Posts: 701
    Re: Car insulation
    « Reply #15 on: May 20, 2013 - 01:09:35 AM »
    I now have everything out of the interior. I removed the old factory insulation, do I replace that with the same stuff or can I do the whole firewall in the sound deadener? Do you do the roof also?

    Logged


    Offline shoooter

    • Full Member
    • ***
    • Posts: 701
    Re: Car insulation
    « Reply #16 on: May 22, 2013 - 04:41:22 PM »
     :feedback:



    Quote from: shoooter on May 20, 2013 - 01:09:35 AM
    I now have everything out of the interior. I removed the old factory insulation, do I replace that with the same stuff or can I do the whole firewall in the sound deadener? Do you do the roof also?
    Logged

    Offline HP_Cuda

    • Hit the skinny little pedal on the right!
    • Sr. Resident
    • ******
    • Posts: 5268
    • Mopar or No Car!
    Re: Car insulation
    « Reply #17 on: May 22, 2013 - 06:51:28 PM »
    You can buy the insulation pieces from Yeardone or many other outfits.

    I have included a pic here which shows a couple of new pieces.

    Btw, under the carpet I have fatmat installed.
    Logged
    1970 Cuda Clone 440 4 speed - sublime green
    1970 Cuda 383 4 speed - yellow - SOLD

    Offline Surfmichaels

    • Jr. Member
    • **
    • Posts: 260
    Car insulation
    « Reply #18 on: May 22, 2013 - 06:51:32 PM »
    Quote from: Topcat on March 14, 2013 - 10:16:39 PM
    I thought long and hard about this tarry, gooey, sticky, never to be removed easily under floor insulation.

    My decision was not to use it.

    Since I'm going with 2.5" stock manifolds, it should cut down on decibels considerably.
    The engine will get about 6-10 mpg. Certainly not a daily driver qualifier.

    As far as heat: I do have a special insulation (NASA good stuff thats not sticky) on the floor areas that keeps heat from penetrating into the interior. Keeping heat out is more of a concern.


    Topcat can you share more info on what you used? I had a fully stripped miata and could hear everyone including rocks pinging underneath the car. It was very engaging but the heat in the floor well and along the transmission tunnel was intense. My 73 cuda will be totally stripped interior but 'd like to add something to keep my feet and right leg from being cooked. I am removing the Dynamat that the PO installed and would love to find a solution that isn't so permanent. Word of warning if you install any viscoelastic material (Dynamat,fatmat) you better want it forever.... It's taking tons of effort to remove.
    Logged

    Offline ntstlgl1970

    • Resident
    • *****
    • Posts: 2204
    • T a c o c a t
    Re: Car insulation
    « Reply #19 on: May 23, 2013 - 01:52:38 AM »
    Quote from: shoooter on May 20, 2013 - 01:09:35 AM
    I now have everything out of the interior. I removed the old factory insulation, do I replace that with the same stuff or can I do the whole firewall in the sound deadener? Do you do the roof also?

    I did the roof on my car, made a huge difference in reducing the noise inside the car - try knocking on the roof sometime, it's like an empty drum without the sound deadener. I also used expanding sound deadening foam between the roof skin and the crossbeam too which also helped.
    Logged
    70 Cuda, 7.0L Gen-III Hemi, Viper T56 w/9310 gearset, 3.91's, Megasquirt MS3x v3.57, Innovate wideband, Firm Feel upper arms, torsion bars, springs and strut rods, QA1 DA shocks. I did everything on this car except the fancy paint stuff and I drive it...and I can't seem to stop messing with it....

    Offline 73EStroker

    • Sr. Member
    • ****
    • Posts: 1343
    Re: Car insulation
    « Reply #20 on: May 23, 2013 - 06:54:59 PM »
     :iagree: I used a product everywhere including the roof. It now is bearable in 100ºF heat. Product is about $250 to do the entire car including the trunk and door exterior panels. It is a bitumen like sticky side with tin foil on it. Sticks like $h'ite to a blanket.  Called B-Quiet. They also told me on the phone it is suitable for the roof even in a place like Arizona in summer.
    Logged
    Barry (Salmon Arm)

    Offline shoooter

    • Full Member
    • ***
    • Posts: 701
    Re: Car insulation
    « Reply #21 on: May 23, 2013 - 07:01:09 PM »
    thanks for the info I already bought the insulation and I am planning on doing it real soon. Question was about the firewall but ill grab some stock insulation. does it come in a kit? I am planning on doing the interior , inside of the doors, roof but not the trunk, i will leave that painted
    Logged

    Offline ntstlgl1970

    • Resident
    • *****
    • Posts: 2204
    • T a c o c a t
    Re: Car insulation
    « Reply #22 on: May 23, 2013 - 07:59:11 PM »
    Quote from: shoooter on May 23, 2013 - 07:01:09 PM
    thanks for the info I already bought the insulation and I am planning on doing it real soon. Question was about the firewall but ill grab some stock insulation. does it come in a kit? I am planning on doing the interior , inside of the doors, roof but not the trunk, i will leave that painted
    I plan to do my firewall and the cowl area with dynamat - the best prices I found on it was on Amazon of all places. I ran dynamat under the carpet and floor and tunnel shield on the underside of the car. Really cut down on the heat transmitted into the car from the exhaust
    Logged
    70 Cuda, 7.0L Gen-III Hemi, Viper T56 w/9310 gearset, 3.91's, Megasquirt MS3x v3.57, Innovate wideband, Firm Feel upper arms, torsion bars, springs and strut rods, QA1 DA shocks. I did everything on this car except the fancy paint stuff and I drive it...and I can't seem to stop messing with it....

    Offline shoooter

    • Full Member
    • ***
    • Posts: 701
    Re: Car insulation
    « Reply #23 on: May 23, 2013 - 09:28:19 PM »
    Quote from: ntstlgl1970 on May 23, 2013 - 07:59:11 PM
    I plan to do my firewall and the cowl area with dynamat - the best prices I found on it was on Amazon of all places. I ran dynamat under the carpet and floor and tunnel shield on the underside of the car. Really cut down on the heat transmitted into the car from the exhaust

    I got a good deal on eBay. Will you still use the stock insulation or just the dynamat on the firewall?
    Logged

    Offline Topcat

    • C-C.com Expert
    • ********
    • Posts: 15376
    • Member since 9/16/04
    Re: Car insulation
    « Reply #24 on: May 23, 2013 - 10:23:58 PM »
    Quote from: Surfmichaels on May 22, 2013 - 06:51:32 PM
    Topcat can you share more info on what you used? I had a fully stripped miata and could hear everyone including rocks pinging underneath the car. It was very engaging but the heat in the floor well and along the transmission tunnel was intense. My 73 cuda will be totally stripped interior but 'd like to add something to keep my feet and right leg from being cooked. I am removing the Dynamat that the PO installed and would love to find a solution that isn't so permanent. Word of warning if you install any viscoelastic material (Dynamat,fatmat) you better want it forever.... It's taking tons of effort to remove.


    It's about 1/4" thick. Originally used for buildings.

    After talking to Charlie, he told me this stuff was ideal for floor and roof areas on cars. He sent me some for practically free.

    After I 3M adhesive spray; I put down a carpet insulation over it.

    http://www.lowereflectiveinsulation.com/products.php
    Contact Charlie at:    info at lowereflectiveinsulation dot com for more information.

    Logged
    Mike, Fremont, CA.

    Offline Topcat

    • C-C.com Expert
    • ********
    • Posts: 15376
    • Member since 9/16/04
    Re: Car insulation
    « Reply #25 on: May 23, 2013 - 10:30:50 PM »
    And it's lightweight!

    How Does LOW-E Reflective Insulation Work?
    Logged
    Mike, Fremont, CA.

    Offline gafletch

    • Jr. Member
    • **
    • Posts: 236
    Re: Car insulation
    « Reply #26 on: May 28, 2013 - 02:23:48 PM »
    I'm considering a product on eBay called sound deadener, sold by flamekits1 . It's 50ml thick, 50 sq ft for $60 shipped.  It doesn't  appear to be the bubble type of product like ez kool, but a rubber and aluminum barrier.  Have you heard any feedback?  Thanks, Greg.
    Logged

    Offline ntstlgl1970

    • Resident
    • *****
    • Posts: 2204
    • T a c o c a t
    Re: Car insulation
    « Reply #27 on: May 28, 2013 - 03:52:33 PM »
    Quote from: shoooter on May 23, 2013 - 09:28:19 PM
    I got a good deal on eBay. Will you still use the stock insulation or just the dynamat on the firewall?
    I won't be using the stock insulation at all, just the dynamat and then some generic carpet underlayment from summit that is aluminized on one side that I glue to the the dynamat
    Logged
    70 Cuda, 7.0L Gen-III Hemi, Viper T56 w/9310 gearset, 3.91's, Megasquirt MS3x v3.57, Innovate wideband, Firm Feel upper arms, torsion bars, springs and strut rods, QA1 DA shocks. I did everything on this car except the fancy paint stuff and I drive it...and I can't seem to stop messing with it....
    Pages: 1 [2]
    « previous next »