found 70 cuda, 383, 4 spd in salvage yard today

Author Topic: found 70 cuda, 383, 4 spd in salvage yard today  (Read 3979 times)

Offline b5blueaar

  • Jr. Member
  • **
  • Posts: 381
  • Mad Max Cuda
found 70 cuda, 383, 4 spd in salvage yard today
« on: March 12, 2005 - 10:28:42 PM »
could not believe it.
I was in my favorite salvage yard today dismantling a 68 mustang fastback for my youngest sons Elanor clone project.
Walking a path I had walked 20 times while going in and out.

Looked over and there 5 yards away, peeking out from under a buick was the unmistakable firewall of a cuda. Heart skipped a beat, could this be the hemi I am looking for :beer:

yup, 1970 cuda, 4 spd car. no vin tag, no fender tag, no radiator mount.
Looking around I found the bucket seats nearby and the dash, but no back seat.
I looked in the backs of the bucket seats and sure enough, there was a partial build sheet.
BS23N0Bxxxxxx, which matched the vin stamped in the cowl. 383 car.
Still has a nice 4 spd hump with console brackets and the 4 spd steering column, but pedals are long gone as is the engine, trans and rear end.
Man I love this junkyard more every trip.
Very exciting, still have not seen everything.
I had walked within 5 yards of this car in plain site at least 20 times.

Also located a couple rear ends that could be dana's. Not very familiar with dana's yet, so not sure but I plan to learn.




Offline 4Cruizn

  • Administrator
  • C-C.com Expert
  • *****
  • Posts: 18521
  • HEMI FISH
Re: found 70 cuda, 383, 4 spd in salvage yard today
« Reply #1 on: March 13, 2005 - 12:25:53 AM »
B5 did that cuda have any front bumper brackets??  Sure could use some of those!!    :dontknow:   :worship: 

Offline b5blueaar

  • Jr. Member
  • **
  • Posts: 381
  • Mad Max Cuda
Re: found 70 cuda, 383, 4 spd in salvage yard today
« Reply #2 on: March 13, 2005 - 07:15:38 AM »
i looked at so many yesterday I am not sure but, it seems like it did.
I will check when I go back.


Offline 4Cruizn

  • Administrator
  • C-C.com Expert
  • *****
  • Posts: 18521
  • HEMI FISH
Re: found 70 cuda, 383, 4 spd in salvage yard today
« Reply #3 on: March 13, 2005 - 01:21:16 PM »
i looked at so many yesterday I am not sure but, it seems like it did.
I will check when I go back.


Greatly appreciated!!  1970 brackets are hard to come by it seems!!  Thanks for checking!!   :thumbs: 

Offline MEK-Dangerfield

  • C-C.com Expert
  • ********
  • Posts: 20946
  • I don't get NO respect! Member since 1/25/2002
Re: found 70 cuda, 383, 4 spd in salvage yard today
« Reply #4 on: March 13, 2005 - 01:37:00 PM »
4C,
  Have you checked with  stephensperformance.com ???

  Mike

Mike

1970 Challenger - SOLD
2016 SXT+.  1 of 524 SXT+'s in Plumb-crazy for 2016.

Offline 4Cruizn

  • Administrator
  • C-C.com Expert
  • *****
  • Posts: 18521
  • HEMI FISH
Re: found 70 cuda, 383, 4 spd in salvage yard today
« Reply #5 on: March 13, 2005 - 02:15:23 PM »
4C,
  Have you checked with  stephensperformance.com ???

  Mike



I will call them tommorrow!   Thanks for the link!    Maybe I can talk April into giving you a water dish or pillow for your pink palace!!   :thumbs:

Offline MEK-Dangerfield

  • C-C.com Expert
  • ********
  • Posts: 20946
  • I don't get NO respect! Member since 1/25/2002
Re: found 70 cuda, 383, 4 spd in salvage yard today
« Reply #6 on: March 13, 2005 - 03:01:38 PM »
4C,
  They are a Mopar salvage yard DEEP in the heart of 'Bama. The accent will tip you off.  :laughing: They helped me out with a few odd ball things. These bumper brackets should be do-able.

 About that "pink palace"... I have a feeling I won't even get a Milkbone out of April.  :stomp:

  Mike

Mike

1970 Challenger - SOLD
2016 SXT+.  1 of 524 SXT+'s in Plumb-crazy for 2016.

Offline b5blueaar

  • Jr. Member
  • **
  • Posts: 381
  • Mad Max Cuda
Re: found 70 cuda, 383, 4 spd in salvage yard today
« Reply #7 on: March 20, 2005 - 10:37:06 AM »
4c,
the bumper brackets are still on the car, but are bent severely.
Drivers side is twisted on the end of one bracket, the pass side is bent back about 90 degrees.
are you still interested?

Offline 4Cruizn

  • Administrator
  • C-C.com Expert
  • *****
  • Posts: 18521
  • HEMI FISH
Re: found 70 cuda, 383, 4 spd in salvage yard today
« Reply #8 on: March 20, 2005 - 03:07:18 PM »
4c,
the bumper brackets are still on the car, but are bent severely.
Drivers side is twisted on the end of one bracket, the pass side is bent back about 90 degrees.
are you still interested?


Thanks for thinking of me b5blue!!  No I'll have to pass on those I think!  I might have some.  CP says he found some in the junk yard also!!  Thanks alot for helping!!