Author Topic: power steering pump pulley (Read 2148 times)

pyrojim · « **on:** March 12, 2013 - 11:36:50 AM »

From a 1971 dart, federal pump (340 style) spoked. 7" diameter with a 5/8" shaft.
P.M. me if you have one you'd like to part with.
Jim

brads70 · « **Reply #1 on:** March 12, 2013 - 12:44:55 PM »

If you don't have any luck finding a nice used one, they are available here....

pyrojim · « **Reply #2 on:** March 19, 2013 - 01:37:12 PM »

Great info, Thanks Brad.

DoNotChallengeHer · « **Reply #3 on:** March 19, 2013 - 02:37:29 PM »

Send Scamper360 a pm. He is my brother . He has a lot of 1971 a body stuff.

pyrojim · « **Reply #4 on:** March 19, 2013 - 02:43:23 PM »

Great info, Thanks Brad.

I appreciate the help, after talking with Randy, they do not make the pulley for a federal pump. Only Saginaw.
Thanks again.

pyrojim · « **Reply #5 on:** March 19, 2013 - 02:45:04 PM »

I appreciate the help, after talking with Randy, they do not make the pulley for a federal pump. Only Saginaw.
Thanks again.

P.M. sent. Thanks for the help!!!

DoNotChallengeHer · « **Reply #6 on:** March 19, 2013 - 04:20:18 PM »

P.M. sent. Thanks for the help!!!

. No problem. I will give him a call. So he checks his PM's .

DoNotChallengeHer · « **Reply #7 on:** March 20, 2013 - 01:09:59 PM »

I talked to my brother. He doesn't have one.

pyrojim · « **Reply #8 on:** March 22, 2013 - 09:57:26 AM »

I talked to my brother. He doesn't have one.

Thanks for trying, I appreciate it. Found one in Pittsburg, hope it's correct.

Jim

BIGSHCLUNK · « **Reply #9 on:** March 23, 2013 - 08:33:10 PM »

I did have some pulleys in the garage... I can look if you still need...