silver 572 with red guts

[69CHARGERMD]

Any new pics ??
One of my favorite cars on this site,,,,,,nice work Bruce !!

Doug   

[cordodge]

Any new pics ??
One of my favorite cars on this site,,,,,,nice work Bruce !!

Doug   

Thanks Doug I appreciate it. Love your build as well, the black paint looks awesome and after looking at it, that's why my roadrunner will be black (hopefully as nice as yours). I will load some pics soon, I haven't been working on it to much between traveling and work but now I have to buckle down and get back at it lol.

Bruce

[cordodge]

What do you guys think of this manifold with two edelbrock carbs??. I am not going to be racing the car so not looking to get every ounce of power out of it but for sure I will play with it. the nice thing is it is single plane, factory height and spacing, I have the ray barton single carb intake but man it is quite high, not sure how duel carbs will be on the street never really used that set-up before.

Bruce

[moparman82]

Looks awesome, skip the eddies tho, they suck!! Proform, quick fuel, Holley, demon, ANYTHING but eddies

[cordodge]

Looks awesome, skip the eddies tho, they suck!! Proform, quick fuel, Holley, demon, ANYTHING but eddies

Yeah I hear you but I am guessing preforms ect would have to go sideways? just thinking of a breather set-up

bruce

[anlauto]

Duel fuel body fuel injection

[cordodge]

Duel fuel body fuel injection

I hear ya Alan but with the Canadian dollar it would be crazy I would think

[cordodge]

I was thinking if I milled a half inch off the Barton intake It would be enough, I don't think it would affect anything to much. what do you guys think??

I would have removed the center brace from the underside of the hood had I known It would give me about 3/4" but not sure if it would make the hood to flimsy

Thanks Bruce

[dfrazz]

Yeah I hear you but I am guessing preforms ect would have to go sideways? just thinking of a breather set-up

bruce

I would be worth giving the guys at Proform a call before you pull the trigger.

[cordodge]

I would be worth giving the guys at Proform a call before you pull the trigger.

Yeah for sure, I am just doing some tinkering and I think if I mill about a 1/4" off the Barton intake I will have enough clearance, may have to cut the bowl vent in half or may fabricate a real short 90 degree elbow and join each bowl vent together with some holes alone the top.

I really don't want to run 2x4s so ill figure it out

Bruce

[GCragtop]

Looks awesome, skip the eddies tho, they suck!! Proform, quick fuel, Holley, demon, ANYTHING but eddies

I have twin edelbrocks with stageV intake on my hemi and it run very well.

[cordodge]

well the mock-up carb and breather set-up is on, made a mock-up tube to connect both vents. I have about 3/4" clearance so if I milled a 1/4" off the intake I should be fine as the engine mounts on the alterkation seem pretty snug, I am thinking that 3/4" will probably be ok though.

bruce

[rUNCHARGER]

I got my shaker to work with the Stage V, barely. My next action would have been to space down the k-member 1/2" like what they did with Hemi A-bodies.

Sheldon

[cordodge]

I got my shaker to work with the Stage V, barely. My next action would have been to space down the k-member 1/2" like what they did with Hemi A-bodies.

Sheldon

Hey Sheldon, yeah I guess 1/4" shims would be easy if I needed.

bruce.

[Topcat]

I have twin edelbrocks with stageV intake on my hemi and it run very well.

 

They can be modified just like Holley's.
Many say they are easier than Holey's to re tune.