Billet E-Body Trunk Hinges

News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1] 2

    Author Topic: Billet E-Body Trunk Hinges  (Read 5191 times)

    Offline TheBilletHouse

    • Industrial Designer
    • Jr. Member
    • **
    • Posts: 27
    • Ted Brock
      • The Billet House
    Billet E-Body Trunk Hinges
    « on: March 21, 2013 - 12:25:44 PM »
    Hello everyone,

    Here they are prototyped and ready to be fitted on the car.  The only thing required for install is a hole drilled for a 5/16 bolt (you can see the socket head bolt in the picture mid-way between the hinge and out-rigger that holds the back of the gas spring.

    It seems like the cuda and challenger have different support braces that were welded into the car.  I designed these based on the challenger brace.  I noticed on John's Cuda Shop that the brace looks different.  The hole needed is about 6" from the pin that the hinge pivots on.  Can anyone tell me if there is a flat on the bulge on the back of the flange about 6" from them pin on the cuda?  It looks like it.

    Thanks for your help,
    Ted
    Logged
    Ted Brock


    Offline 'Cuda Hunter

    • Sr. Resident
    • ******
    • Posts: 9102
    • Tastes Like Chicken
    Re: Billet E-Body Trunk Hinges
    « Reply #1 on: March 21, 2013 - 02:27:43 PM »
    I sure hope they fit on a cuda.   :popcorn:

    They look sweet!

    Can't wait to know what the pricing will be.  :popcorn:
    Logged
    "All riches begin as a state of mind and you have complete control of your mind"  -- B. Lee

    Offline ragtopdodge

    • Resident
    • *****
    • Posts: 4065
    Re: Billet E-Body Trunk Hinges
    « Reply #2 on: March 21, 2013 - 03:02:25 PM »
    Sweet, I want these for my Challenger.

    Will these help for the cuda build?

    http://www.ebay.com.au/itm/CUDA-TRUNK-LID-HINGE-BRAKET-WHEELHOUSE-LEFT-SIDE-/310290755366

    Logged
    '70 318-auto Chally 'vert
    '71 383-auto 'Cuda 'vert (sold)
    06 300c SRT8
    04 2500 QCLB 4x4 HO

    Offline TheBilletHouse

    • Industrial Designer
    • Jr. Member
    • **
    • Posts: 27
    • Ted Brock
      • The Billet House
    Re: Billet E-Body Trunk Hinges
    « Reply #3 on: March 21, 2013 - 03:55:52 PM »
    Quote from: ragtopdodge on March 21, 2013 - 03:02:25 PM
    Sweet, I want these for my Challenger.

    Will these help for the cuda build?

    http://www.ebay.com.au/itm/CUDA-TRUNK-LID-HINGE-BRAKET-WHEELHOUSE-LEFT-SIDE-/310290755366


    Yeah, it says Australia and then ships from Canada.  Thank you very much!!!!   :)  I've looked around and all the replacements are Challengers but you can weld into both cars? (confused)

    Quote from: 'Cuda Hunter on March 21, 2013 - 02:27:43 PM
    I sure hope they fit on a cuda.   :popcorn:

    They look sweet!

    Can't wait to know what the pricing will be.  :popcorn:


    Oh, they will fit  ;) , just have to figure out what we need to do.  Pricing will be available as soon as we put them on a car and know they work.

    Ted
    « Last Edit: March 21, 2013 - 04:06:17 PM by TheBilletHouse »
    Logged
    Ted Brock

    Offline thedodgeboys

    • Resident
    • *****
    • Posts: 3633
    • ''Normal’s Overrated''
      • THE DODGE BOYS
    Re: Billet E-Body Trunk Hinges
    « Reply #4 on: March 21, 2013 - 09:26:29 PM »
     :popcorn: :popcorn: :popcorn:


    Ill look Friday at a Cuda
    Logged
    Go Fast & Have Fun...
    70 6.1 HEMI 6-speed Drop Top...

    Offline moparman82

    • MOPAR or No car
    • Resident
    • *****
    • Posts: 2834
    • Livin' the dream
    Re: Billet E-Body Trunk Hinges
    « Reply #5 on: March 22, 2013 - 12:19:04 PM »
    How much are these going for?  I got a chally.
    Logged
    Scott in Omaha
    Searching for the right 70 Cuda driver
    1973 challenger in go-mango, on it's way to a 70 T/A clone SOLD
    2015 crew cab Hemi ram SOLD
    2019 Ram Laramie
    2016 Tahoe LTZ SOLD
    1976 Ramcharger 383 4spd SOLD
    2016 Audi

    24 mopars past and 2 present

    Offline Got JOB

    • Full Member
    • ***
    • Posts: 661
    • Member since 2-14-06
    Re: Billet E-Body Trunk Hinges
    « Reply #6 on: March 22, 2013 - 03:27:59 PM »
    Are these hinges going to work for a vert? I think the brace for verts are not as wide as a hardtop. Looks like the outrigger portion could interfere with the top well.
    Logged
    70 T/A Plum crazy
    71 vert. viper red
    74 Rallye triple black ( sold )
    76 Aspen Wagon
    West Georgia

    Offline TheBilletHouse

    • Industrial Designer
    • Jr. Member
    • **
    • Posts: 27
    • Ted Brock
      • The Billet House
    Re: Billet E-Body Trunk Hinges
    « Reply #7 on: March 26, 2013 - 10:22:09 AM »
    Quote from: Got JOB on March 22, 2013 - 03:27:59 PM
    Are these hinges going to work for a vert? I think the brace for verts are not as wide as a hardtop. Looks like the outrigger portion could interfere with the top well.

    That is a good question.  We will be testing on a convertible and make sure either it works or there will be a separate version for convertibles.

    Thanks,
    Ted
    Logged
    Ted Brock

    Offline Got JOB

    • Full Member
    • ***
    • Posts: 661
    • Member since 2-14-06
    Re: Billet E-Body Trunk Hinges
    « Reply #8 on: March 26, 2013 - 12:04:01 PM »
     :bigsmile:     Great,I need a set.
    Logged
    70 T/A Plum crazy
    71 vert. viper red
    74 Rallye triple black ( sold )
    76 Aspen Wagon
    West Georgia

    Offline TheBilletHouse

    • Industrial Designer
    • Jr. Member
    • **
    • Posts: 27
    • Ted Brock
      • The Billet House
    Re: Billet E-Body Trunk Hinges
    « Reply #9 on: March 26, 2013 - 05:24:29 PM »
    Test fitting went great and they are released for sale.  The price is $445 and that includes all the pieces, mounting hardware, and both gas springs.  They are available on our website:  www.thebillethouse.com

    Brushed, and Black Anodized are an additional $85.00 and polished is an additional $100.00

    We will have a 2 week pre-order period and then start making and shipping them out.

    Unfortunately, we haven't figured out how to make them work with convertibles. YET!

    Thank you everyone for your help and support.  I could not have done any of this with out you guys.  We are working on a number other billet e-body components and will update you on those soon.

    Ted
    Logged
    Ted Brock

    Offline ragtopdodge

    • Resident
    • *****
    • Posts: 4065
    Re: Billet E-Body Trunk Hinges
    « Reply #10 on: March 26, 2013 - 06:49:29 PM »
     :clapping:

    Let us know ASAP when you get them working for a CHallenger 'vert and I'll order some ASAP!

     :ylsuper:


    So this eliminates the need for the tension rod(s)? 
    « Last Edit: March 26, 2013 - 06:51:11 PM by ragtopdodge »
    Logged
    '70 318-auto Chally 'vert
    '71 383-auto 'Cuda 'vert (sold)
    06 300c SRT8
    04 2500 QCLB 4x4 HO

    Offline johns cuda shop

    • 71 Cuda Pro-Touring Build
    • Sr. Member
    • ****
    • Posts: 1205
    • Machinist and Fabricator
      • Custom Machine Components
    Re: Billet E-Body Trunk Hinges
    « Reply #11 on: April 04, 2013 - 02:39:42 PM »
    Great work Ted, They look awesome.!!!!!!
    Logged
    71 Cuda Gen III Aluminum 426 Hemi T56 6 speed 4.10 8.75 Modified & Lowered RMS coilover suspension Wilwood discs

    Offline TheBilletHouse

    • Industrial Designer
    • Jr. Member
    • **
    • Posts: 27
    • Ted Brock
      • The Billet House
    Re: Billet E-Body Trunk Hinges
    « Reply #12 on: April 16, 2013 - 05:30:38 PM »
    Quote from: ragtopdodge on March 26, 2013 - 06:49:29 PM
    :clapping:

    Let us know ASAP when you get them working for a CHallenger 'vert and I'll order some ASAP!

     :ylsuper:


    So this eliminates the need for the tension rod(s)?

    Here is the preliminary design for the convertible.
    I will be prototyping the design in a few days and then testing it.  It will run an additional $100 due to the additional parts involved.  3 bearings and 2 billet pieces. 
    There is just not enough space in the back of the 'vert.

    The finished design will be visual appealing.  :)  And the tension rods do go away entirely.
    Logged
    Ted Brock

    Offline ragtopdodge

    • Resident
    • *****
    • Posts: 4065
    Re: Billet E-Body Trunk Hinges
    « Reply #13 on: April 16, 2013 - 06:15:59 PM »
     :ylsuper:


    Awesome stuff!  I'm definitely gettin' a pair!

     :2thumbs:
    Logged
    '70 318-auto Chally 'vert
    '71 383-auto 'Cuda 'vert (sold)
    06 300c SRT8
    04 2500 QCLB 4x4 HO

    Offline thedodgeboys

    • Resident
    • *****
    • Posts: 3633
    • ''Normal’s Overrated''
      • THE DODGE BOYS
    Re: Billet E-Body Trunk Hinges
    « Reply #14 on: April 16, 2013 - 10:30:10 PM »
    Looking good as always Ted  :cooldancing:
    Logged
    Go Fast & Have Fun...
    70 6.1 HEMI 6-speed Drop Top...
    Pages: [1] 2
    « previous next »