News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1] 2

    Author Topic: SHAKER (4 barrel carb/air cleaner post/stud)?  (Read 3138 times)

    Offline filmsurgeon

    • Full Member
    • ***
    • Posts: 594
    • Resto-Mod '70 Convertible Challenger
    SHAKER (4 barrel carb/air cleaner post/stud)?
    « on: April 18, 2013 - 03:32:07 AM »
    Can anyone tell me were I can get a "correct" air cleaner stud/post for a 4 barrel SHAKER?  Not just a length of all-thread.  I had a correct length stud (with threads on each end), but the guy that rebuilt my engine 6 years ago never returned it, and he doesn't remember anything about it.  Thanks.
    Logged
    1970 Challenger Convertible (JH27N0B); Resto-Mod; 605 HP, 412cid Small Block; Holley 750CFM Carburetor; A-833 23-spline 4-SPD; A-body 8.75 rear-end w/3.55 gears; 3" mini-tub; leaf spring relocation kit with split-leaf mono and Caltracs; American Racing AR500 Wheels, Rears = 15x10 (5.5" BS) with 315/60-15 BFG Comp T/A Drag Radials; Fronts = 15x7 (3.5" BS) with 215/70-15 BFG Radial T/A Radials.


    Offline filmsurgeon

    • Full Member
    • ***
    • Posts: 594
    • Resto-Mod '70 Convertible Challenger
    Re: SHAKER (4 barrel carb/air cleaner post/stud)?
    « Reply #1 on: April 22, 2013 - 01:52:58 PM »
    Anybody??
    Logged
    1970 Challenger Convertible (JH27N0B); Resto-Mod; 605 HP, 412cid Small Block; Holley 750CFM Carburetor; A-833 23-spline 4-SPD; A-body 8.75 rear-end w/3.55 gears; 3" mini-tub; leaf spring relocation kit with split-leaf mono and Caltracs; American Racing AR500 Wheels, Rears = 15x10 (5.5" BS) with 315/60-15 BFG Comp T/A Drag Radials; Fronts = 15x7 (3.5" BS) with 215/70-15 BFG Radial T/A Radials.

    Offline anlauto

    • Permanent Resident
    • *******
    • Posts: 12328
    • I'm Alan G...I'm a Mopar Addict
      • Alan Gallant Automotive Restoration
    Re: SHAKER (4 barrel carb/air cleaner post/stud)?
    « Reply #2 on: April 22, 2013 - 01:58:17 PM »
    « Last Edit: April 22, 2013 - 02:01:10 PM by anlauto »
    Logged
    I've taught you everything you know.....but I haven't taught you everything I know !
    www.alangallantautomotiverestoration.com

    Offline filmsurgeon

    • Full Member
    • ***
    • Posts: 594
    • Resto-Mod '70 Convertible Challenger
    Re: SHAKER (4 barrel carb/air cleaner post/stud)?
    « Reply #3 on: April 22, 2013 - 07:08:45 PM »
    Quote from: anlauto on April 22, 2013 - 01:58:17 PM
    What carburetor ? Here's Carter AVS http://www.ebay.com/itm/MOPAR-Carter-AVS-Air-Cleaner-Carb-Stud-Carburetor-4BBL-68-71-440-HP-69-70-Dodge-/230964706590?pt=Vintage_Car_Truck_Parts_Accessories&hash=item35c691bd1e&vxp=mtr#ht_1032wt_806


    Thanks for the response.  Not quite sure it matters, but it's a Holley 4150.  The important thing is that the air-cleaner stud/post be long enough for use with a SHAKER.
    Logged
    1970 Challenger Convertible (JH27N0B); Resto-Mod; 605 HP, 412cid Small Block; Holley 750CFM Carburetor; A-833 23-spline 4-SPD; A-body 8.75 rear-end w/3.55 gears; 3" mini-tub; leaf spring relocation kit with split-leaf mono and Caltracs; American Racing AR500 Wheels, Rears = 15x10 (5.5" BS) with 315/60-15 BFG Comp T/A Drag Radials; Fronts = 15x7 (3.5" BS) with 215/70-15 BFG Radial T/A Radials.

    Offline filmsurgeon

    • Full Member
    • ***
    • Posts: 594
    • Resto-Mod '70 Convertible Challenger
    Re: SHAKER (4 barrel carb/air cleaner post/stud)?
    « Reply #4 on: April 25, 2013 - 01:44:53 AM »
     :popcorn:   :popcorn:   :popcorn:   :popcorn:   :popcorn:   :popcorn:
    Logged
    1970 Challenger Convertible (JH27N0B); Resto-Mod; 605 HP, 412cid Small Block; Holley 750CFM Carburetor; A-833 23-spline 4-SPD; A-body 8.75 rear-end w/3.55 gears; 3" mini-tub; leaf spring relocation kit with split-leaf mono and Caltracs; American Racing AR500 Wheels, Rears = 15x10 (5.5" BS) with 315/60-15 BFG Comp T/A Drag Radials; Fronts = 15x7 (3.5" BS) with 215/70-15 BFG Radial T/A Radials.

    Offline tman

    • Sr. Member
    • ****
    • Posts: 1331
    Re: SHAKER (4 barrel carb/air cleaner post/stud)?
    « Reply #5 on: April 25, 2013 - 02:33:28 AM »
    Put your setup together and measure how long of a stud you need.  This place sells 3 different ones and you can contact them for the length, or maybe Mopar Dave at Roseville. 

    http://www.rocketresto.com/catalog/carburetor.html
    Logged

    Offline mopardave

    • Sponsor
    • Resident
    • ***
    • Posts: 3294
    • 1973 Challenger F8 in and out, 68 383,727 3.23 pos
      • rosevillemoparts
    Re: SHAKER (4 barrel carb/air cleaner post/stud)?
    « Reply #6 on: April 25, 2013 - 08:16:25 AM »
    Logged
    Mopar Dave
    Rosevillemoparts.com

    if I haven't replied to your post or PM email me direct    dradcliffe@mikeriehls.com




    70 FK5 Challenger RT/SE
    70 FC7 70 Road Runner - Sold
    71 FM3 Challenger RT
    71 Cuda (in process for restoration)
    73 F8 Challenger
    1990 XJ - sold
    2000 Dakota Quad Cab
    2010 Ram Crew Cab 2500 4wd - sold
    2015 Ram Crew Cab 2500 4wd Black Out

    Offline anlauto

    • Permanent Resident
    • *******
    • Posts: 12328
    • I'm Alan G...I'm a Mopar Addict
      • Alan Gallant Automotive Restoration
    Re: SHAKER (4 barrel carb/air cleaner post/stud)?
    « Reply #7 on: April 25, 2013 - 09:13:04 AM »
    Shaker cars use the same carb studs as any other car.
    Logged
    I've taught you everything you know.....but I haven't taught you everything I know !
    www.alangallantautomotiverestoration.com

    Offline filmsurgeon

    • Full Member
    • ***
    • Posts: 594
    • Resto-Mod '70 Convertible Challenger
    Re: SHAKER (4 barrel carb/air cleaner post/stud)?
    « Reply #8 on: April 25, 2013 - 01:22:07 PM »
    Quote from: anlauto on April 25, 2013 - 09:13:04 AM
    Shaker cars use the same carb studs as any other car.

    I appreciate your feedback, but something tells me that's not necessarily true.  Why then was the stud that was returned to me by my engine guy too short?  Is there NO member on this forum that has an original SHAKER set-up (either assembled or unassembled) that can take a photo of their air cleaner stud (not some crappy "all-thread") against a tape measure, so I can see the proper lengths (total and threaded ends)?  Thanks.
    Logged
    1970 Challenger Convertible (JH27N0B); Resto-Mod; 605 HP, 412cid Small Block; Holley 750CFM Carburetor; A-833 23-spline 4-SPD; A-body 8.75 rear-end w/3.55 gears; 3" mini-tub; leaf spring relocation kit with split-leaf mono and Caltracs; American Racing AR500 Wheels, Rears = 15x10 (5.5" BS) with 315/60-15 BFG Comp T/A Drag Radials; Fronts = 15x7 (3.5" BS) with 215/70-15 BFG Radial T/A Radials.

    Offline filmsurgeon

    • Full Member
    • ***
    • Posts: 594
    • Resto-Mod '70 Convertible Challenger
    Re: SHAKER (4 barrel carb/air cleaner post/stud)?
    « Reply #9 on: April 29, 2013 - 04:48:33 AM »
     :popcorn: :popcorn: :popcorn: :popcorn: :popcorn: :popcorn: :popcorn: :popcorn: :popcorn: :popcorn:
    Logged
    1970 Challenger Convertible (JH27N0B); Resto-Mod; 605 HP, 412cid Small Block; Holley 750CFM Carburetor; A-833 23-spline 4-SPD; A-body 8.75 rear-end w/3.55 gears; 3" mini-tub; leaf spring relocation kit with split-leaf mono and Caltracs; American Racing AR500 Wheels, Rears = 15x10 (5.5" BS) with 315/60-15 BFG Comp T/A Drag Radials; Fronts = 15x7 (3.5" BS) with 215/70-15 BFG Radial T/A Radials.

    Offline Jamiez

    • Sr. Member
    • ****
    • Posts: 1981
    • Retro
    Re: SHAKER (4 barrel carb/air cleaner post/stud)?
    « Reply #10 on: April 29, 2013 - 06:26:22 AM »
    Have you checked the MMC Detroit e body fastener guide?  I'm not sure carb studs are in it, but they are I'm sure it would list all the dimensions/finish/thread for the various options
    Logged

    Offline Jamiez

    • Sr. Member
    • ****
    • Posts: 1981
    • Retro
    Re: SHAKER (4 barrel carb/air cleaner post/stud)?
    « Reply #11 on: April 29, 2013 - 06:19:08 PM »
    Everything I see lists it by vendor and doesn't list any differences for a shaker.
    a holley 4V would be 3.5" overall, .5 threaded on the carb side.  Thread on them is 1/4-20
    Logged

    Offline filmsurgeon

    • Full Member
    • ***
    • Posts: 594
    • Resto-Mod '70 Convertible Challenger
    Re: SHAKER (4 barrel carb/air cleaner post/stud)?
    « Reply #12 on: May 03, 2013 - 01:39:18 PM »
    Oh well  :dunno:  Since it appears that no one here has an original SHAKER set-up with an original air cleaner stud to measure and take a photo in order to help me out, I guess I'm gonna just have to wait until I get my carb back from being rebuilt so I can put my set-up together and take a measurement for the correct stud length.  Thanks to all who offered advice.
    Logged
    1970 Challenger Convertible (JH27N0B); Resto-Mod; 605 HP, 412cid Small Block; Holley 750CFM Carburetor; A-833 23-spline 4-SPD; A-body 8.75 rear-end w/3.55 gears; 3" mini-tub; leaf spring relocation kit with split-leaf mono and Caltracs; American Racing AR500 Wheels, Rears = 15x10 (5.5" BS) with 315/60-15 BFG Comp T/A Drag Radials; Fronts = 15x7 (3.5" BS) with 215/70-15 BFG Radial T/A Radials.

    Offline anlauto

    • Permanent Resident
    • *******
    • Posts: 12328
    • I'm Alan G...I'm a Mopar Addict
      • Alan Gallant Automotive Restoration
    Re: SHAKER (4 barrel carb/air cleaner post/stud)?
    « Reply #13 on: May 03, 2013 - 03:34:00 PM »
    Quote from: anlauto on April 25, 2013 - 09:13:04 AM
    Shaker cars use the same carb studs as any other car.

     :iagree:  Not sure what source is telling you otherwise...
    Logged
    I've taught you everything you know.....but I haven't taught you everything I know !
    www.alangallantautomotiverestoration.com

    Offline filmsurgeon

    • Full Member
    • ***
    • Posts: 594
    • Resto-Mod '70 Convertible Challenger
    Re: SHAKER (4 barrel carb/air cleaner post/stud)?
    « Reply #14 on: May 03, 2013 - 05:30:33 PM »
    Quote from: anlauto on May 03, 2013 - 03:34:00 PM
    :iagree:  Not sure what source is telling you otherwise...

    So, you're saying that ALL air-cleaner studs are the same length?
    Logged
    1970 Challenger Convertible (JH27N0B); Resto-Mod; 605 HP, 412cid Small Block; Holley 750CFM Carburetor; A-833 23-spline 4-SPD; A-body 8.75 rear-end w/3.55 gears; 3" mini-tub; leaf spring relocation kit with split-leaf mono and Caltracs; American Racing AR500 Wheels, Rears = 15x10 (5.5" BS) with 315/60-15 BFG Comp T/A Drag Radials; Fronts = 15x7 (3.5" BS) with 215/70-15 BFG Radial T/A Radials.
    Pages: [1] 2
    « previous next »