'74 Cuda Heater Box to firewall top cowl clearance

News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: '74 Cuda Heater Box to firewall top cowl clearance  (Read 1105 times)

    Offline dilligaf

    • Jr. Member
    • **
    • Posts: 231
      • Willcraft Technologies Ltd.
    '74 Cuda Heater Box to firewall top cowl clearance
    « on: March 16, 2005 - 04:17:14 PM »
    Hi,
    Being up her e in the "cold canadian north" I have to hav ethe heater back in the Cuda.
    Heater box etc has been out of the car for 4 years.
    I am to the point of putting interior back together, but when I mount the heaterbox and sng up the three firewall bolts around the blower motor that sticks through the firewall and get things to where they look like they should be, I have this 2" or better gap from the top of the heater box to the bottom of the cowl opening it meets up with?
    There really is not adjustment, so not sure what the dillio is.
    Anyone able to post a few pics of theirs insalled showing gaps etc.
    Thanks,
    Dan
    Logged
    2 1974 'Cuda's
    1 1973 Challenger


    Offline miketyler

    • Resident
    • *****
    • Posts: 2561
      • www.miketyler.net
    Re: '74 Cuda Heater Box to firewall top cowl clearance
    « Reply #1 on: March 16, 2005 - 04:41:01 PM »
    I believe there is a large "pillow" gasket that goes there.
    Logged
    72' Cuda restomod
    70 Mustang Mach 1
    07' Toyota Tacoma Prerunner Dbl cab in Speedway Blue!
    01' Honda 1100 Shadow Sabre
    96' Seadoo Challenger

    Offline Chryco Psycho

    • Administrator
    • C-C.com Guru
    • *****
    • Posts: 36620
    • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
    Re: '74 Cuda Heater Box to firewall top cowl clearance
    « Reply #2 on: March 16, 2005 - 05:22:07 PM »
    & a J bolt to suck the box up tight to the vent opening
    Logged

    Challenger - You`ll wish You Hadn`t

    Offline dilligaf

    • Jr. Member
    • **
    • Posts: 231
      • Willcraft Technologies Ltd.
    Re: '74 Cuda Heater Box to firewall top cowl clearance
    « Reply #3 on: March 16, 2005 - 05:23:59 PM »
    Any pics greatly appreciated, I have no J bolt etc, I can fab, but need to see wgat to do.
    Thanks,
    Dan
    Logged
    2 1974 'Cuda's
    1 1973 Challenger

    Offline miketyler

    • Resident
    • *****
    • Posts: 2561
      • www.miketyler.net
    Re: '74 Cuda Heater Box to firewall top cowl clearance
    « Reply #4 on: March 16, 2005 - 07:44:00 PM »
    I can help withthe gasket but dont have a clue on the J-bolt. CP - can you elaborate on where the J-bolt is located?

    Logged
    72' Cuda restomod
    70 Mustang Mach 1
    07' Toyota Tacoma Prerunner Dbl cab in Speedway Blue!
    01' Honda 1100 Shadow Sabre
    96' Seadoo Challenger

    Offline Chryco Psycho

    • Administrator
    • C-C.com Guru
    • *****
    • Posts: 36620
    • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
    Re: '74 Cuda Heater Box to firewall top cowl clearance
    « Reply #5 on: March 16, 2005 - 09:06:16 PM »
    it hooks onto the lip of the cowl & drops down through a small hole in the front  heater box , the J bolt has a nut that threads onto it & you just tighten the nut to pull the heater box tight to the cowl 
     The parts book doesn`t show the J bolt except in Valiant A/C the page before the pic you posted Mike, which doesn`t show the correct location
    « Last Edit: March 16, 2005 - 09:19:33 PM by Chryco Psycho »
    Logged

    Challenger - You`ll wish You Hadn`t
    Pages: [1]
    « previous next »