Well I have had VERY RECENT experience with AMD and Goodmark. Dont kid yourself, aftermarket panels are just that.... AFTERMARKET. We attempted to stick with 1 brand of panel to hopefully make things a little easyer. This was not possible, and because of time constraints we only did half of what we originally intended to do. I will actually finish the job next spring. Ordering different (bigger) panels, for the front "half" of what needs to be done. As a side note : Thanks to MOPARDAVE and to MEK for their help.
Anyway, things need a bit of messaging. Mount tabs are not always where they need to be. This is not a TV show where you never see these kind of issues. I'll give you a side by side comparison on one issue just so all can see. My buddys used an AMD rear valance panel on his RT/SE Chally (2 years ago) it was to narrow and had to be sectioned out to meet the lower Q's. We had a talk about what he went through before we got started, so we expected some issues. The Goodmark panel that I used (due to back order from AMD)on the other hand is to BIG, and needed to be brougt "in" and slighty pie cut to meet Q configuration. As a side note - the cut outs for the bumperettes are not exactly where they need to be. I may at a later date try to adjust my bumperettes a little, to better align w the panel.
Granted this is about a tenth of what we all went through, but I got other $#!+ to do.
Topic: Replacement body panels / frame rails - AMD vs. Dynacorn (and / or others??) (Read 5211 times)
