News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: Is this and where do I get new ones  (Read 644 times)

    Offline GrimmyDog

    • Jr. Member
    • **
    • Posts: 36
    Is this and where do I get new ones
    « on: June 08, 2013 - 11:20:15 PM »
    One is ugly and the other is 41 years old.
    Logged
    It might be ugly but its a '72 barracuda with a 383/727/8.75 combination and that makes it fun.


    Offline GrimmyDog

    • Jr. Member
    • **
    • Posts: 36
    Re: Is this and where do I get new ones
    « Reply #1 on: June 08, 2013 - 11:33:26 PM »
    I know it's my running lamp harness to a '72 barracuda but past that I dunno......
    Logged
    It might be ugly but its a '72 barracuda with a 383/727/8.75 combination and that makes it fun.

    Offline Topcat

    • C-C.com Expert
    • ********
    • Posts: 15376
    • Member since 9/16/04
    Re: Is this and where do I get new ones
    « Reply #2 on: June 08, 2013 - 11:46:36 PM »
    I've taken grimmey parts before and soaked em in Evaporust from Harbor Freight and then they come out clean.

    Back up is Simple Green and little nylon brushes they sell at HF for a buck and start scrubbing.

    O'Reilly's and Auto Zone sell these little packets of electrical contact that are cheap.
    Put some in before re assembly.

    From the pic, it looks re useable. after cleaning.   :2cents:
    Logged
    Mike, Fremont, CA.

    Offline GrimmyDog

    • Jr. Member
    • **
    • Posts: 36
    Re: Is this and where do I get new ones
    « Reply #3 on: June 08, 2013 - 11:58:23 PM »
    I taped and cleaned it up.  Trust me under the electrical tape I put on the wires are ugly.  The idiot previous owner did lord knows what to it.  It only has 3 wires still connected to a solder point and the harness is ugly on the inside.
    Logged
    It might be ugly but its a '72 barracuda with a 383/727/8.75 combination and that makes it fun.
    Pages: [1]
    « previous next »