Lubing after suspension rebuild

[CUDA JAS]

Soooo....stupid question.

Finished the front suspension rebuild, I assume  I should lube up all the suspension pieces.

How much lube shoudl I put in, until it comes out of the boots?

I am using polly bushing everywhere and have greasable LCA pins.  Can I use regular lithium grease on the LCAs?

Jason

[Chryco Psycho]

You do not need a lot of lube in there get the boots to swell a bit & there will be lots of grease in there , no point in wasting it pushing enough in to start coming out of the boots

[CUDA JAS]

You do not need a lot of lube in there get the boots to swell a bit & there will be lots of grease in there , no point in wasting it pushing enough in to start coming out of the boots

Thanks Chryco.

[Chryco Psycho]

I use a special silicone based grease for poly bushings , it is thicker than honey & sticks like crazy , caot everything with that during assy & you should be fine for a long time   Lithium is not my first choice I would use a high quality synthetic .