** 72cudamaan AKA .... Andy needs our HELP! **

[blown motor]

Looks like you will be going down before me? How can I get some parts to you to take down? Some parts are big ( leaf springs)? Glad to drive somewhere to meet up sometime?

Brad we'll be going on Aug 23 and I'm honoured to be able to do this. I'll take the truck so parts size won't matter. We can meet somewhere, got time to figure that out.

If anyone else from Ontario is donating parts please chime in so we can co-ordinate collection by Aug 22.

[IMNCARN82]

This is what makes CC.c different.    Update that list Brad...I got a whole car lying around over here...   And I'd be more than happy to donate anything to such a great cause.  Can we get some pix of where it's at? Just to get an idea.   You people are the best there is!    R/T

[72cudamaan]

I don't know to say, but Thank You to every one here. The generosity pouring in is so overwhelming that I am
at a complete loss for words. I'm sorry, I'm not ignoring anybody on purpose. Some wonderful people are trying to coordinate
the logistics of this effort so that my build may go smoothly. I am trying to update my restoration thread so that you guys can see
where I am at in the process. The shell is painted and I have most of the interior components about ready to install. When
I get done wet sanding the car the vinyl roof can be installed, then the dash and glass can be put in. This week will be kinda slow for me as the Chemo drags me down for about 4 or 5 days.  Again, Thank You to all of you here, your kind words and support help
me get by every day.

[72cudamaan]

By the way everyone, meet my son Doug. He's been a wonderful help on my car lately.

[brads70]

By the way everyone, meet my son Doug. He's been a wonderful help on my car lately.

Does his hands flail wildly when he talks too or is that just a "Dave" thing? Thought maybe it was a MI thing? 

[Topcat]

I have a collection on some side door glass hardware.

Would like to know what parts you might be looking for.

[72cudamaan]

I have a collection on some side door glass hardware.

Would like to know what parts you might be looking for.

Hey Mike, I was working on putting the glass in the door today. What a nightmare. I'm having a bit of difficulty
concentrating so I'm sure that compounds the problems. I think I have all of the hardware for the doors. I got a kit from R/T specialties
but I'm not sure if all the little washers and parts are in the kit. I'll look some more tomorrow.

[Topcat]

Hey Mike, I was working on putting the glass in the door today. What a nightmare. I'm having a bit of difficulty
concentrating so I'm sure that compounds the problems. I think I have all of the hardware for the doors. I got a kit from R/T specialties
but I'm not sure if all the little washers and parts are in the kit. I'll look some more tomorrow.

Read this and look at my pictures of hardware.

http://www.cuda-challenger.com/cc/index.php?topic=84250.msg843218#msg843218

[72cudamaan]

If he would be making the trip again let me know I can meet him for the transfer or he can pick it up at the shop which is about an hour north of Pittsburgh.
Dave

I might just know someone going to Mopar Nats. from Pittsburgh. I'll check it out. Thanks Dave!

[4Cruizn]

I have a door with glass in it for reference if needed.   

[Road_Runner]

An updated list of parts needed would be great.  I didn't see anything on the first list that I remember having in the basement, but who knows..  I gotta believe I've got something down there.

Later, Jim

[brads70]

Maybe copy and paste this list and mark off what your giving as donated? Sound good Dan? Andy you do the same when you discover something new to add to the list as I'm certain you will need more than whats on the list!


Front windshield
Front and rear swaybar link kits
front brake rotors
front calipers
front brake hoses
inner/outer tie rods & sleeves
idler arm
pitman arm
torsion bars w/boot&clips
heater control valve
26" radiator crossflow d.s lower hose
rad. fan & clutch
fan shroud
fuel sending unit 3/8 line w/return-------donated
3/8 fuel line set w/return
driveshaft
15" ralley wheels & trim rings
shocks
440 accessory brackets  has a/c,ps,alt,wp
pulley set up for above
oil pan
timing cover
ecu
most parts to build my 493
starter
alternator
p.s pump--------- donated
distributor
carb,intake
headers or manifolds
balancer
kickdown linkage
bumpers

[HP_Cuda]

Cool I actually think I have the PS pulley for an AC Big Block setup!

[stinger]

if wanted I have a performer intake I can donate. It's not junk but not sure it's enough intake

[4Cruizn]

I think soon we are going to have to come up with some more details on the parts . . . . I know Andy has some ideas of the stroker kit and he is capable of building the engine and has access to a machine shop!  These are all a bonus!   If we can pick the stroker kit and get a plan on the engine, we can decide on a carb and intake. 

I am going to start a donation thread for some of the members that would lIke to help with this cause but have no parts to donate . . . A lot of the parts will have to be purchased and Dave from Roseville has already said he will do all he can with prices to help this cause!  Either I or other members will drive and pick up parts to save money on shipping.   

Thanks in advance to all members that are willing to help out with this cause!