Thanks for asking! The work that has come lately doesn't really show. I've rebuilt and reinstalled the heater box, installed the brake and clutch pedals and power booster and I am in the middle of rebuilding my dash. Tonight I'll be using a little Flitz to polish the lens and hopefully will put it in the dash assembly tomorrow along with the wiring harness. I've built a walk around stand for reassembling the dash then I'll be able to install it complete and spend as little time as possible on my back on the floor of the car. As soon as I get the dash in I'll have the front and rear glass installed and then put all of the body panels back on the car. Everything has been sanded with 1200 grit as soon as the car is back together we'll wet sand again with 2500 grit and polish. Things should start to move pretty fast after that.
Also I had been out of town for two and a half weeks while my mom was in rehab as she tried to recover from Adult Onset Stills Disease. That is one ugly disease for anyone to have but is especially bad for an 80 year old women who just barely recovered from the initial flare up last summer. Sadly, shortly after I returned home she gave up the fight for the second flare up and passed away. I am so very glad that I was able to spend the time with her that I did. Now I will be gone this week from Tuesday through Saturday as we travel to Michigan for her memorial. Obviously the car is a much lower priority and gets worked on as I am able, hopefully it'll still make a few shows this season, though.
