6.1 swap using SRT grand cherokee manifolds

[GCCUDA]

So I have read a lot of post about this . Here Are some notes from my adventure
1:They don't fit on the Ebody. I m doing some customising and will do a follow up .
2; I have also tried the crate which are for a 2009 challenger. pass side fits but the torsion bar is in the way below it .

[grimmey71]

So you want be buying my gcsrt's exhaust manifolds then, damn

[Haddixj]

I was told the srt8 manifolds would fit. Never tried it though

[GCCUDA]

I have them in . I Ginded the flanges off. they fit . pass side close to the torsion bar. I am going add 3." of 3" pipe and weld the flange back on . Main problem is the drivers side. it WONT FIT WITH ANY FACTORY STERRING BOX I have tried both manual and power. I have takin the box out and looking at putting in a rack from unisteer. I WONT NEED Their PUMP. I will keep you posted and will add picks asap
 

[Katfish]

Interested in seeing what you come up with.

[GCCUDA]

so the srt grand cherkoee headers will fit . i have ordered a msd  starter with a clocked mount . more updates to follow

[johns cuda shop]

Any Pictures ?

[GCCUDA]

SO i  have them in . I would love to put up the pictures but this site only allows 300 mb pictures

[GCCUDA]

So the msd clockable starter is out ! wont work. going to look at the bobbmc ?

[GCCUDA]

SO only other issue is the steering box.. power box no way!!! manual box is a no go as well .  looking at unisteer rack !!

[roadrunninMark]

what about the borgerson box?  It is a little smaller then the stock box...

[David Weber]

Interested in seeing what you come up with.

Really recomend staying away from unisteeer. Steering connection is a real poor angle and the turning radius is like a 1970s club cab. Bite the bullet and get an Alterkations.

As far as grinding the flanges off the Jeep manifolds we did that then welded on some V clamps for more room and a cleaner look.

[roadrunninMark]

Yeah MMissile!  Let us know and take lots of pics!!!!

[ragtopdodge]

Seems to be cheaper to get TTI headers than having to redo your steering.

[GCCUDA]

NEVER LIKED LEGO.... IF I DID ID STILL HAVE MY 440   ... LOL, Looks like I will either have to use a unisteer or the borgeson .. anyone have any pictures of the borgeson installed?