70 Cuda

[BadJoey]

Looks and sounds like a deal . Wish I had the money . Can't get the web site to copy and paste . You're looking for a 70 Cuda with a 14 grand by it now under 70 barracuda on ebay

http://www.ebay.com/sch/i.html?_sacat=0&_from=R40&_nkw=1970%20barracuda&_sop=3

[anlauto]

This one  ? http://cgi.ebay.com/ebaymotors/70-Plymouth-Cuda-340-BS23H-s-Matching-Project-Car-White-Red-A-C-Automatic-/350879367091?pt=US_Cars_Trucks&hash=item51b20a3fb3

[anlauto]

Oops...How about this one.. http://cgi.ebay.com/ebaymotors/1970-PLYMOUTH-BARRACUDA-PROJECT-CAR-1970-CUDA-PROJECT-CAR-/221289046006?pt=US_Cars_Trucks&hash=item3385dadff6

[crocha617]

This one  ? http://cgi.ebay.com/ebaymotors/70-Plymouth-Cuda-340-BS23H-s-Matching-Project-Car-White-Red-A-C-Automatic-/350879367091?pt=US_Cars_Trucks&hash=item51b20a3fb3

Wow white with a red interior pretty cool combo.

[anlauto]

Wow white with a red interior pretty cool combo.

Yea...I was thinking that would be a real nice car finished...

['Cuda Hunter]

I wonder what the other options on the car were.
The white with red interior one that is.

[HP_Cuda]

Wow check out this rust bucket.

http://cgi.ebay.com/ebaymotors/Plymouth-Barracuda-convertible-1970-plymouth-cuda-convertible-5-2-l-/130998359483?pt=US_Cars_Trucks&hash=item1e801c55bb&vxp=mtr

Might as well replace all the metal and build one up from the ashes will ya?

[crocha617]

Wow check out this rust bucket.

http://cgi.ebay.com/ebaymotors/Plymouth-Barracuda-convertible-1970-plymouth-cuda-convertible-5-2-l-/130998359483?pt=US_Cars_Trucks&hash=item1e801c55bb&vxp=mtr

Might as well replace all the metal and build one up from the ashes will ya?

That one actually bid up to like $14.5k the first time it was listed and the guy wanted like $15k I think.

[HP_Cuda]

Was there one piece of metal not rusted on it?

[crocha617]

Was there one piece of metal not rusted on it?

She's rough for sure. 

[anlauto]

I'd like to see the floor pans...but I doubt they are there

Sadly...I've restored worse cars...

[anlauto]

This is a 71 Challenger convertible I restored...

[YYZ]

That '70 Barracuda ragtop is way worse than the '71 Challenger you just pictured....

[anlauto]

That '70 Barracuda ragtop is way worse than the '71 Challenger you just pictured....

I beg to differ...None of the sheet metal in my picture was original to the car except the rectangle convertible reinforcement plate over the rear axle.
We replaced the entire front frame/torsion bar section, outer rockers and 90% of the inner rockers. We did retain the inner rocker convertible reinforcements which are not seen in that picture...

[YYZ]

Except for the fact that the pictures you've posted of the Challenger are after blasting, and the Barracuda hasn't yet been stripped.

If one looks at the door pillar/cowl sides of the Barracuda, it is quite obviously in brutal condition -- swelling, separating etc.  Ditto for other areas of the car.