Author Topic: 1973 Cuda Affordable Roller  (Read 3170 times)

Offline anlauto

  • Permanent Resident
  • *******
  • Posts: 12328
  • I'm Alan G...I'm a Mopar Addict
    • Alan Gallant Automotive Restoration
1973 Cuda Affordable Roller
« on: October 12, 2013 - 03:35:01 PM »
A customer just dropped off this 1973 BH23G3 car.
He wants me to pull out the stout 440 for another car of his, then try to sell this one.

This one comes with a new 727 automatic transmission, dual exhaust but no motor or headers. You could easily dump your big block into this and be back on the road.

Body & paint and a decent 20 footer, with some bubbles in the lower rear 1/4's etc... Interior is decent, comes with some big honking stereo, aftermarket gauges etc...

15" rallyes with decent rubber....aftermarket rear spoiler, 440 stripes...

SOLD...SOLD....SOLD....

Contact me here with a PM or email me at anlauto@hotmail.com and I will give you his number, please only contact me if you're serious. If you're local, the car is here at my shop now, but not for long.
« Last Edit: October 16, 2013 - 01:22:50 PM by anlauto »
I've taught you everything you know.....but I haven't taught you everything I know !
www.alangallantautomotiverestoration.com




Offline anlauto

  • Permanent Resident
  • *******
  • Posts: 12328
  • I'm Alan G...I'm a Mopar Addict
    • Alan Gallant Automotive Restoration
Re: 1973 Cuda Affordable Roller
« Reply #1 on: October 12, 2013 - 03:43:51 PM »
Same guy also has the brand new complete AMD 70-71 bumpers/brackets and rear exhaust valance I posted in another ad.
I've taught you everything you know.....but I haven't taught you everything I know !
www.alangallantautomotiverestoration.com

Offline HP_Cuda

  • Hit the skinny little pedal on the right!
  • Sr. Resident
  • ******
  • Posts: 5268
  • Mopar or No Car!
Re: 1973 Cuda Affordable Roller
« Reply #2 on: October 12, 2013 - 04:38:23 PM »

Seems to be a screamin deal for a 73, dump a motor in and go!
1970 Cuda Clone 440 4 speed - sublime green
1970 Cuda 383 4 speed - yellow - SOLD

Offline 'Cuda Hunter

  • Sr. Resident
  • ******
  • Posts: 9102
  • Tastes Like Chicken
Re: 1973 Cuda Affordable Roller
« Reply #3 on: October 12, 2013 - 10:19:18 PM »
That does look like a good deal.
you know I'm gonna ask. Fender tag?
"All riches begin as a state of mind and you have complete control of your mind"  -- B. Lee

Offline anlauto

  • Permanent Resident
  • *******
  • Posts: 12328
  • I'm Alan G...I'm a Mopar Addict
    • Alan Gallant Automotive Restoration
Re: 1973 Cuda Affordable Roller
« Reply #4 on: October 12, 2013 - 10:24:25 PM »
No fender tag...
I put it on KiJiJi tonight and within the first hour I had a guy come out and look at it. He wants it. I had to refuse his cash deposit tonight until I get a chance to talk to the owner...

I'm guessing it's priced right... :roflsmiley:
I've taught you everything you know.....but I haven't taught you everything I know !
www.alangallantautomotiverestoration.com

Offline hemiken

  • Sr. Resident
  • ******
  • Posts: 8785
  • Hemi-fied Mopar in Australia
Re: 1973 Cuda Affordable Roller
« Reply #5 on: October 13, 2013 - 02:47:06 AM »
 :thinkerg: I think you should put the correct 72-74 Rallye Cluster in for the new owner too :icon16: , that 70-71 Rallye Cluster just does not belong in their........ :misbehaving: :naughty: :roflsmiley:
1970 Barracuda   (O^--^===|===^--^O)
1971 Barracuda   (O O {]{]{]|[}[}[} O O)
1970 Challenger  (O O [======R/T=] O O)
1971 Challenger  (O O ===== ===== O O)
I pay homage to the best Mopars ever built.

Offline anlauto

  • Permanent Resident
  • *******
  • Posts: 12328
  • I'm Alan G...I'm a Mopar Addict
    • Alan Gallant Automotive Restoration
Re: 1973 Cuda Affordable Roller
« Reply #6 on: October 13, 2013 - 07:40:27 AM »
Seven grand tach, reset knobs "inside" the gauges IS correct for 72-74 so I'm not sure what you're referring too ?
I've taught you everything you know.....but I haven't taught you everything I know !
www.alangallantautomotiverestoration.com

Offline hemiken

  • Sr. Resident
  • ******
  • Posts: 8785
  • Hemi-fied Mopar in Australia
Re: 1973 Cuda Affordable Roller
« Reply #7 on: October 14, 2013 - 09:10:38 PM »
 :banghead: my eyes are playing tricks :22yikes::wave: sorry Alan........... :grinno: silly me. Leave those ones in their then :2thumbs:
1970 Barracuda   (O^--^===|===^--^O)
1971 Barracuda   (O O {]{]{]|[}[}[} O O)
1970 Challenger  (O O [======R/T=] O O)
1971 Challenger  (O O ===== ===== O O)
I pay homage to the best Mopars ever built.

Offline 74challenger03

  • Full Member
  • ***
  • Posts: 820
Re: 1973 Cuda Affordable Roller
« Reply #8 on: October 14, 2013 - 09:29:57 PM »
were was that deal when I was looking :crying:
What does it profit a man to gain the whole would and lose his soul.

Offline blown motor

  • Resident
  • *****
  • Posts: 3013
Re: 1973 Cuda Affordable Roller
« Reply #9 on: October 15, 2013 - 08:56:56 AM »
Same guy also has the brand new complete AMD 70-71 bumpers/brackets and rear exhaust valance I posted in another ad.

Will the bumpers and brackets work on a 74 Challenger?
« Last Edit: October 15, 2013 - 12:45:16 PM by blown motor »
In search of the eternal buzz!

Offline anlauto

  • Permanent Resident
  • *******
  • Posts: 12328
  • I'm Alan G...I'm a Mopar Addict
    • Alan Gallant Automotive Restoration
Re: 1973 Cuda Affordable Roller
« Reply #10 on: October 15, 2013 - 09:15:24 AM »
While the bumpers and brackets work on a 74 Challenger?

No, sorry.....Cuda bumpers are different than Challenger, brackets are different too !
I've taught you everything you know.....but I haven't taught you everything I know !
www.alangallantautomotiverestoration.com

Offline johnny-bravo

  • Jr. Member
  • **
  • Posts: 32
Re: 1973 Cuda Affordable Roller
« Reply #11 on: October 15, 2013 - 08:06:09 PM »
I started to email you but checked your profile and seen you were in Canada......... $8,500 and it looks that good, only if I was a bit more up north cause I would love to make it mine, anyone here that can deliver on the cheap?....lol

Offline anlauto

  • Permanent Resident
  • *******
  • Posts: 12328
  • I'm Alan G...I'm a Mopar Addict
    • Alan Gallant Automotive Restoration
Re: 1973 Cuda Affordable Roller
« Reply #12 on: October 15, 2013 - 08:08:17 PM »
Took it outside today before I cut it's heart out...
I've taught you everything you know.....but I haven't taught you everything I know !
www.alangallantautomotiverestoration.com

Offline TexasLion

  • Jr. Member
  • **
  • Posts: 11
Re: 1973 Cuda Affordable Roller
« Reply #13 on: October 15, 2013 - 08:21:11 PM »
Has the person who tried to put down the cash backed out? So it's still up for sale?

Offline anlauto

  • Permanent Resident
  • *******
  • Posts: 12328
  • I'm Alan G...I'm a Mopar Addict
    • Alan Gallant Automotive Restoration
Re: 1973 Cuda Affordable Roller
« Reply #14 on: October 15, 2013 - 08:29:52 PM »
Has the person who tried to put down the cash backed out? So it's still up for sale?

The first "cash" offer was for $8000.00, I refused his deposit until I could contact the owner. The owner really wants $8500 so he turn down the guys offer....The potential buyer didn't seem anxious to step up $500, so it's back on the block !
I've taught you everything you know.....but I haven't taught you everything I know !
www.alangallantautomotiverestoration.com