Dyna Tech mitymount vs Mancini Racings poly loc

[bdalehemi]

I've got 74 cuda. Just dropped in 440 727 setup with headman elite headers.  I barely have 1/8in between steering box and fender liner after all adjustmenting available is used up.  I'm trying to decide what mounts to replace the 5 dollar cheapos at the store with.  Any and all advise greatly appreciated.   

[cudabob496]

I've got 74 cuda. Just dropped in 440 727 setup with headman elite headers.  I barely have 1/8in between steering box and fender liner after all adjustmenting available is used up.  I'm trying to decide what mounts to replace the 5 dollar cheapos at the store with.  Any and all advise greatly appreciated.   

People have reported polylock failures.
I use stock mounts, but with a Shumacher Torque Strap.

http://www.bing.com/images/search?q=schumacher+torque+strap&id=78E1CC297A44B865ECD2E679DCE523D6B546E677&FORM=IQFRBA#view=detail&id=78E1CC297A44B865ECD2E679DCE523D6B546E677&selectedIndex=0

[Chryco Psycho]

the best solution I have found is the stock mount with a 6" or so long piece of flat steel approx 1/8 thick & 1 " wide bolted to the bock ear & the mount center bolt on the left mount , cheap to make , unbreakable & almost invisible

[BIGSHCLUNK]

Run these on my HEMI....  yes Schumacher... but .........

http://www.engine-swaps.com/Pages/InstructionPages/BCEHemi.html

[bdalehemi]

Thanks for the info guys, I think imma run the dyna tech mitymounts with a torque strap.  Hopefully the new mounts will raise my motor away from steering box and inner fender.