Author Topic: CARLISLE 2014  (Read 20623 times)

Offline ammo

  • Jr. Member
  • **
  • Posts: 389
Re: CARLISLE 2014
« Reply #90 on: July 02, 2014 - 01:50:23 PM »
Started packing my travel bag for the trip.  packed so far, Oil, trans fluid, P/s fluid, brake fluid, antifreeze, wrenches, sockets, screwdrivers, cap and rotor and wire set. set of belts, ballast resistor, pack of fuses,  and a mini floor jack.   Anything else anyone can think of?  I'm hoping I need none of it, but better safe than sorry.    :working:   
1973 dodge challenger




Offline 74_318Cuda

  • Jr. Member
  • **
  • Posts: 88
Re: CARLISLE 2014
« Reply #91 on: July 02, 2014 - 01:58:22 PM »
I'll be there helping out my brother at his vending spot at H/I 126-128. Should have the 71 Challenger he's been working on up there. So look for that at the 52 foot black trailer in the vending space and stop by and say hi. Also will have my red Neon SRT-4 up there as parts getter and wal mart runner.

Starting to sort out the parts we are selling and getting the camping gear ready. The weather so far is looking pretty good!


Dave

Offline ShelbyDogg

  • Sr. Resident
  • ******
  • Posts: 5007
Re: CARLISLE 2014
« Reply #92 on: July 02, 2014 - 06:39:41 PM »
Oil, trans fluid, P/s fluid, brake fluid, antifreeze, wrenches, sockets, screwdrivers, cap and rotor and wire set. set of belts, ballast resistor, pack of fuses,  and a mini floor jack.   Anything else anyone can think of?
Whole distributor or at least just the plate that has the pickup coil on it. (I carry the whole thing)
Spare electronic ignition box,
Timing light,
Voltage regulator,
TEST LIGHT,
Flashlight to find bad fuses in the dark,
Vice-grips
tire plug kit and mini air-compressor,
Roll of duct tape and spare hose clamps, wire ties,
roll of wire and a crimping tool with a couple ends.

If you make it to Carlisle, I can fix any electrical problem that you might have, but you have to get there.
It's the drive there that's fun, but being on the side of the road sucks.


Rob

3 E-bodies, Megasquirt-1v3.0, Edelbrock Pro-Flo-1, Holley C950, FAST EZ-EFI; say no to carbs...yes to throttle bodies

My Pace Car restoration thread:
http://www.cuda-challenger.com/cc/index.php?topic=44869.0


Offline BB73Challenger

  • Sr. Member
  • ****
  • Posts: 1797
  • 2 cars - twice the wrenching... yay?
Re: CARLISLE 2014
« Reply #93 on: July 04, 2014 - 09:15:47 AM »
Looks like my Brother ( member Ravage ) and me will be making it out.
We will be bringing the '74 'Cuda.
Can't wait, always a blast!
Jeff from Cleveland, Ohio

Offline MEK-Dangerfield

  • C-C.com Expert
  • ********
  • Posts: 20946
  • I don't get NO respect! Member since 1/25/2002
Re: CARLISLE 2014
« Reply #94 on: July 04, 2014 - 12:27:17 PM »
Looks like my Brother ( member Ravage ) and me will be making it out.
We will be bringing the '74 'Cuda.
Can't wait, always a blast!

No way!!

Just don't run out of gas on the Pa. turnpike this year.   :poopoke:

It will be great to see you guys again.

Mike

1970 Challenger - SOLD
2016 SXT+.  1 of 524 SXT+'s in Plumb-crazy for 2016.

Offline BB73Challenger

  • Sr. Member
  • ****
  • Posts: 1797
  • 2 cars - twice the wrenching... yay?
Re: CARLISLE 2014
« Reply #95 on: July 05, 2014 - 04:10:06 PM »
No way!!

Just don't run out of gas on the Pa. turnpike this year.   :poopoke:

It will be great to see you guys again.

Can't wait to see everyone again.
Yeah we won't push the envelope on that ever again. That's one of those live and learn deals  :faint:
After all, the only "complication" last time out was leaving the gas cap to the Cuda on a PA turnpike gas pump  :bigsmile:
Hmmm, if it wasn't for running hot in the Challenger the 1st year I'd say I see a trend.
Jeff from Cleveland, Ohio

Offline anlauto

  • Permanent Resident
  • *******
  • Posts: 12328
  • I'm Alan G...I'm a Mopar Addict
    • Alan Gallant Automotive Restoration
Re: CARLISLE 2014
« Reply #96 on: July 05, 2014 - 04:45:27 PM »
Why not just a AAA card ?
I've taught you everything you know.....but I haven't taught you everything I know !
www.alangallantautomotiverestoration.com

Offline shadango

  • Resident
  • *****
  • Posts: 3920
Re: CARLISLE 2014
« Reply #97 on: July 06, 2014 - 12:22:00 AM »
Thanks guys, im trying to make plans now


Hey Al - Tried PMing you, your mailbox is full..... If you are still going, any chance you might still have the pulleys/brackets we chatted about here a while back?

http://www.cuda-challenger.com/cc/index.php?topic=94221.msg939992#msg939992

Now that I am back in the black as far as working, would like to correct my incorrect belt setup......if you still have them for sale maybe you could bring to Carlisle?      :bigsmile:

Offline ammo

  • Jr. Member
  • **
  • Posts: 389
Re: CARLISLE 2014
« Reply #98 on: July 07, 2014 - 07:33:29 AM »
Got my parts and tool box all packed.  Got the exhaust fixed on Sunday (that the texting pizza delivery guy bent all up when he rear ended me a few weeks back).  All Fluids changed and or topped off.  Gas tank is full.  Battery is new. Re-vamping my road trip Itunes list on the Ipod.   I think I'm ready to roll  :burnout:.  You should be able to pick me out right when I show up, I will be the one driving a Dodge.     :roflsmiley:   
1973 dodge challenger

Offline 71gogreen

  • Full Member
  • ***
  • Posts: 687
Re: CARLISLE 2014
« Reply #99 on: July 07, 2014 - 08:18:43 AM »
Ill be there! Thank God!
71challenger-millcreek park\71challenger-millcreek

Offline Moparal

  • Permanent Resident
  • *******
  • Posts: 13085
Re: CARLISLE 2014
« Reply #100 on: July 07, 2014 - 05:37:51 PM »
Hey Al - Tried PMing you, your mailbox is full..... If you are still going, any chance you might still have the pulleys/brackets we chatted about here a while back?

http://www.cuda-challenger.com/cc/index.php?topic=94221.msg939992#msg939992

Now that I am back in the black as far as working, would like to correct my incorrect belt setup......if you still have them for sale maybe you could bring to Carlisle?      :bigsmile:


Ok I will bring them

Offline dougs bs23

  • Sr. Member
  • ****
  • Posts: 1691
Re: CARLISLE 2014
« Reply #101 on: July 07, 2014 - 08:17:13 PM »
Tim, glad you got that pipe fixed hope you made the pizza guy pay for it. What time you leaving ?  I'm still not sure if I can make it working nite shift for 6 more weeks but maybe I can follow you.


Sent from my iPhone using Tapatalk
see Bill run  go Navy football///fly navy

Offline ammo

  • Jr. Member
  • **
  • Posts: 389
Re: CARLISLE 2014
« Reply #102 on: July 07, 2014 - 09:03:16 PM »
Tim, glad you got that pipe fixed hope you made the pizza guy pay for it. What time you leaving ?  I'm still not sure if I can make it working nite shift for 6 more weeks but maybe I can follow you.


Sent from my iPhone using Tapatalk

Hi Doug,  undecided yet.  Maybe Friday morning if I can find a room. Or early early sat morning if not.
1973 dodge challenger

Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: CARLISLE 2014
« Reply #103 on: July 08, 2014 - 01:39:17 AM »
One guy has a room booked he is not going to use & Brad has 2 beds but is there alone

Challenger - You`ll wish You Hadn`t

Offline ammo

  • Jr. Member
  • **
  • Posts: 389
Re: CARLISLE 2014
« Reply #104 on: July 08, 2014 - 07:00:53 AM »
One guy has a room booked he is not going to use & Brad has 2 beds but is there alone

Sent Brad an email but have not heard back from him yet.  who is the other person with a booked room who is not going?
1973 dodge challenger