Viper calipers for sale

[brads70]

Not mine but a great price. I'd buy them if I already didn't have a spare set.

http://www.protouringmopar.com/showthread.php?1179-For-sale-Viper-Calipers

[73EStroker]

You got an email address for him Brad. I am in Calgary and will take them for $250

[brads70]

You got an email address for him Brad. I am in Calgary and will take them for $250

 I told him I would take them but I really don't need them, just can't pass up a great deal
I can tell him you will buy them if you want, no problem! I sent him a message asking for his e-mail to pass on to you. 

[73EStroker]

I will take them. Also I have new Cordoba rotors. Don't we need C body rotors to make these work? And if so do they fit the 73 E spindles?

[brads70]

I will take them. Also I have new Cordoba rotors. Don't we need C body rotors to make these work? And if so do they fit the 73 E spindles?

C-Body rotors (73) are 1 1/4" thick the doba rotors are thinner. So you would need pad spacers. I think either Cass (DrDiff) or Andy -AR Engineering has bearing spacers to use the c-body rotor? Not sure for what spindle though? Not 100% sure but I thought I'd read that somewhere on the net?

[HP2]

Andy F's kit, sold through Mancini, fits Viper calipers to Corboda rotors on large bearing ('73+) drum spindles. The kits contains the bracket to mount the calipers and spacers for the pads. Dr Diff has bearings spacers to fit the large bearing Cordoba rotors on small bearing (pre '73) drum spindles. Andy's kit does not fit Viper calipers to 11.75 discs on disc spindles.

[brads70]

Cass makes the spacer for a C-Body rotor. I found it here..... I knew I saw it somewhere?
http://board.moparts.org/ubbthreads/showflat.php?Cat=0&Board=Corners&Number=7571397&Searchpage=1&Main=7570665&Words=+%5C%2Bbody+%5C%2Brotors+%5C%2Bspacer&topic=&Search=true#Post7571397

[73EStroker]

Brad. No contact info for this guy yet. Also got 2 2003 Tiburon seats for $60

[brads70]

Brad. No contact info for this guy yet. Also got 2 2003 Tiburon seats for $60

No nothing yet, I PM'ed him again? I know he was heading out of the country for a bit?
Great score! Even cheaper than mine! I paid $35 each!    Are they is good shape?

[73EStroker]

The driver seat has a hole in the leather, about kidney height, about 1/2" diameter. No side wear marks though from getting in and out. So have enough slush $$$$ here to get a leather repair done. Was from a private guy wrecking the car.

[brads70]

The driver seat has a hole in the leather, about kidney height, about 1/2" diameter. No side wear marks though from getting in and out. So have enough slush $$$$ here to get a leather repair done. Was from a private guy wrecking the car.

Sounds good!