Door buzzer and dome light switch?

[EMCD]

My switch that's near the door hinge broke. Does anyone make a repop? It looks like a plunger type of a switch that make the dome light come on and the door buzzer come on? Thanks.

[Topcat]

71' E body drivers door switch is unique one. It is a 3 pin female connector.
Other years are like below.


http://www.ebay.com/itm/MOPAR-B-C-E-A-BODY-DUAL-PIN-LIGHT-SW-7-16-NEW-/250824307415?pt=Vintage_Car_Truck_Parts_Accessories&hash=item3a664b32d7&vxp=mtr#ht_847wt_758

[anlauto]

If it's 2 prong than you're all set, replacement are readily available. Some E Bodies use a three prong on the drivers side. You could cut and splice the wires to get a two prong to replace the three if that's the case.

[EMCD]

It's a 72 Cuda. Can I pick up the part at napa or autozone?

[EMCD]

And it's the drivers side.

[anlauto]

It's a 72 Cuda. Can I pick up the part at napa or autozone?

Most likely, I know NAPA has the single prong ones, they should have two prong...

[anlauto]

Try Standard DS240T

[EMCD]

Thanks guys

[EMCD]

So, mine is a 3 pin. Any ideas where to get one?

[anlauto]

Have to look for a used one or NOS $$$$....They show up on EBay from time to time.

[Topcat]

So, mine is a 3 pin. Any ideas where to get one?

That's a hard one to get.
NOS ones go for 50-100 bucks if you find one.

The drivers door was the only one to have it in 71'.

I sold one to member here a few months back.

[EMCD]

Weird. My Cuda was a 72, made in may of 1972. Can I convert it to two pole?

[anlauto]

I wonder if you could just convert it to two instead...good question 

[v21jeff]

It is my understanding that each of those wires goes through switch to get ground. You don't want it back feeding through system by jumping wires together. I am going to try jumping two wires together with a diode.

[Katfish]

If they both touch ground, no reason for a diode.