Author Topic: wiper arm clip  (Read 2605 times)

Offline peterro

  • Full Member
  • ***
  • Posts: 713
  • 70 Challenger in progress...
    • The Pistonhead
wiper arm clip
« on: November 11, 2013 - 07:09:09 PM »
I had to use the wipers on my car and found they were missing a piece. Looking for the proper clip that holds the secondary arm on the driver's side. I have no memory of what it's supposed to look like.




Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: wiper arm clip
« Reply #1 on: November 11, 2013 - 09:37:03 PM »
stainless bent over in a U , the bottom grabs the groove & the top hooks over the stud with the U laying on its side

Challenger - You`ll wish You Hadn`t

Offline anlauto

  • Permanent Resident
  • *******
  • Posts: 12328
  • I'm Alan G...I'm a Mopar Addict
    • Alan Gallant Automotive Restoration
I've taught you everything you know.....but I haven't taught you everything I know !
www.alangallantautomotiverestoration.com

Offline ShelbyDogg

  • Sr. Resident
  • ******
  • Posts: 5007
Re: wiper arm clip
« Reply #3 on: December 21, 2013 - 11:36:58 PM »
That is not a picture of the correct clip. The correct one has an arm that goes over the stud and hooks on. It has to be lifted up then pushed back to remove the clip.
Rob

3 E-bodies, Megasquirt-1v3.0, Edelbrock Pro-Flo-1, Holley C950, FAST EZ-EFI; say no to carbs...yes to throttle bodies

My Pace Car restoration thread:
http://www.cuda-challenger.com/cc/index.php?topic=44869.0


Offline JayBee

  • Resident
  • *****
  • Posts: 2477
Re: wiper arm clip
« Reply #4 on: January 05, 2014 - 03:26:21 PM »
Here's what an original one looks like.



John

1970 Barracuda convertible
2014 Toyota Avalon

Offline anlauto

  • Permanent Resident
  • *******
  • Posts: 12328
  • I'm Alan G...I'm a Mopar Addict
    • Alan Gallant Automotive Restoration
Re: wiper arm clip
« Reply #5 on: January 05, 2014 - 04:01:00 PM »
Yes..I goofed up with the picture I stole from EBay. Jaybee has posted the correct one...my apologies :banghead:
I've taught you everything you know.....but I haven't taught you everything I know !
www.alangallantautomotiverestoration.com

Offline willhaven

  • Sr. Member
  • ****
  • Posts: 1285
Re: wiper arm clip
« Reply #6 on: January 15, 2014 - 06:13:31 PM »
Here's mine installed.


Offline ShelbyDogg

  • Sr. Resident
  • ******
  • Posts: 5007
Re: wiper arm clip
« Reply #7 on: January 15, 2014 - 08:43:53 PM »
Here's mine installed.




The top of that one needs to be bent down a little to keep it captured.
Rob

3 E-bodies, Megasquirt-1v3.0, Edelbrock Pro-Flo-1, Holley C950, FAST EZ-EFI; say no to carbs...yes to throttle bodies

My Pace Car restoration thread:
http://www.cuda-challenger.com/cc/index.php?topic=44869.0


Offline PlumCrazyRTSE

  • Jr. Member
  • **
  • Posts: 370
1970 Challenger R/T SE, 440 Six Pack, Super Track Pak, FC7 Plum Crazy Purple
1970 Challenger R/T SE, 440 Six Pack, Super Track Pak, FE5 Bright Red