And RTS stuff you can hang on a wall

[6pkrunner]

Here's the RTS stuff that was remiss yesterday. Plus the 1972 Scat Pack.

[6pkrunner]

[6pkrunner]

If you're looking for ads for a particular car just lemme know.

[Mr. 6pak2go]

Are these reprints or oringals?? i want em!! lol let me know some prices od each ones! thanks cuda dude!

[6pkrunner]

Are these reprints or oringals?? i want em!! lol let me know some prices od each ones! thanks cuda dude!

These are posters made from the ads. You can get them anywhere from original size 8.5 x 11 or 16 x 11 to 36 x (44 to 70 - depending on length to height ratio). And you can have them on heavy bond or laminated.

Here's one guy I did some 1970 Charger stuff for. These are 34 inches by ( 68 - 76) inches

[440_72cuda]

how much for all?

[Mr. 6pak2go]

how there is a couple i want i want the hemi engine, the rts system annouced in color!, heres 1970, sox and martin test, the rts and friends, how far to go is up to you, rts join it, only plymouth offers a system, and engines, and anything you can find on a 72 cuda thanks!! and how much would that be?? thanks Cuda dude! :beer:

[6pkrunner]

how much for all?

What size? - the usualy way I size is from the smaller axis Laminated or not? Take the one below for example. The common sizes that I make are

20 x 31.2
24 x 37.5
28 x 43.8
34 x 53.2

If you wanted say 29 or 31 along the small size its no problem

They all vary in size, but I work with what the smaller axis is.

[6pkrunner]

how there is a couple i want i want the hemi engine, the rts system annouced in color!, heres 1970, sox and martin test, the rts and friends, how far to go is up to you, rts join it, only plymouth offers a system, and engines, and anything you can find on a 72 cuda thanks!! and how much would that be?? thanks Cuda dude! :beer:

This is only a small bit of what I have. There are other engine versions. There is very little 1972 cuda stuff - but I will dig out what I have.
And as above, what sizes and laminated or not?

[Mr. 6pak2go]

24x37.5 laminated!

[6pkrunner]

24x37.5 laminated!

So that's 9 you wanted there?

the hemi engine,
the rts system annouced in color!,
heres 1970,
sox and martin test,
the rts and friends,
 how far to go is up to you,
rts join it,
only plymouth offers a system,
and engines

They will vary in length keeping the small axis at 24 inches. For example the "How far you want to go dpeends on you comes out at 24 x 55.6.

The other thing is I just bought the 1972 Cuda brochure off of eGouge tonight. It will probably take two weeks for payment to go down and come back if you want to wait.
I'll PM you

[Mr. 6pak2go]

oh ok i will wait cause i do want a 72 cuda one! how much for them?? that 10 in all right??

[6pkrunner]

You have a PM.

[GoMango]

6pk, can you also give me an idea about cost on some of these done in poster size? I've got some ads that would look cool that way!

Thanx!

[6pkrunner]

You have a PM.